Equipment
Aldila ‘Tour Blue’ and ‘Tour Green’ shafts
When designing its newest line of shafts, the “Tour Blue” and “Tour Green,” Aldila sought inspiration from its most successful platform, the NV shafts it released to tour players more than 10 years ago.
The NV shafts were made using the company’s Mico Laminate Technology, which means that extremely thin, high-quality layers of graphite were stacked on top of each other to make a shaft that felt smooth and performed more consistently.
A lot has changed in the golf industry in 10 years, but one thing that hasn’t changed is golfer’s appreciation of consistent, smooth-feeling shafts.
For all the technology that went into the new shafts, their design differences are simple. The Tour Green shafts have a stiffer tip section, which creates the low-launch, low-spin conditions that tend to work well with today’s drivers. The Tour Blue shafts have a softer tip section that launches the ball higher and with more spin, making them a good fit for fairway woods.
So what has made the Tour Blue and Tour Green two of the most popular shaft models on tour in 2013? According to John Oldenburg, vice president of engineering for Aldila, it’s the same reason that the NV shafts were so popular on tour — high-quality materials that create smooth feel and consistency.
Oldenburg said the Tour Blue and Tour Green shafts are the most consistent shafts his company has ever produced. They use what he said are the thinnest materials available, graphite fibers that are between three one-thousandths and five one-thousandths of an inch thick, which makes them better in two ways:
- Because graphite shafts are built in layers, their manufacturing always results in a bit of overlap (often referred to as a shaft’s seams). Using thinner materials allows the seams to stay thin. When those seams are balanced throughout the shaft, as Aldila does with its Micro Laminate Technology, it results in a shaft that has more consistent wall thicknesses.
- Since the graphite fibers are thinner, they also need less resin, or glue, to be held together. According to Oldenburg, resin is the weak link of graphite shaft design, because it is much more flexible than the graphite fibers it holds together. With less resin, Aldila can make shafts that are lighter, stiffer and lower in torque.
Aldila engineers also made the Tour Blue and Tour Green shafts with a balance point that is closer to the handle than its NV shafts, which helps balance out the heavier weight of today’s driver heads. It also allows golfers to play the longer-length shafts that have become more common in the industry, yet still keep the swing weight of the club in the D2-to-D5 range that most golfers are comfortable with.
“Before adjustable drivers … features that added weight to the head … drivers used to weigh between 198 and 202 grams, and measure between 44.5 and 45 inches long,” Oldenburg said. “Now they’re between 206 and 2012 grams, are are 45 to 46 inches long.”
The last, and maybe most important finishing thing for the sales of the Tour Blue and Tour Green shafts are the color-coded circuitboard graphics near the handle, which Oldenburg said he hopes communicate to consumers the high-tech materials and construction used to make the shafts.
“Technology stories like Micro Laminate are hard to tell,” Oldenburg said. “This is a very high-tech product, but unfortunately it still looks like a stick and it has to by the rules of golf. With the circuitboard look we’re saying, ‘Hey, there is technology in this.'”
The Tour Blue and Tour Green shafts will be released on Sept. 15 and carry an MSRP of $349. Aldila will initially release both models in a 65-gram version in R, S, X and TX flexes. In January, Aldila plans to release the 75- and 85-gram versions of the shafts.
- LIKE4
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK1
- Kevin Tway what’s in the bag accurate as of the Wells Fargo Championship. More photos from the event here.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Stealth 2 (15 degrees)
Shaft: Mitsubishi Diamana D+ 80 TX
5-wood: TaylorMade Stealth 2 (18 degrees)
Shaft: Mitsubishi Diamana D+ 90 TX
Irons: Wilson Staff Utility (2), Titleist T100 (4-9)
Shafts: Mitsubishi MMT 100 TX (2), True Temper Dynamic Gold Tour Issue X100 (4-9)
Wedges: Titleist Vokey Design SM10 (48-10F @47, 52-12F @51, 56-14F), SM7 (60-10S)
Shafts: True Temper Dynamic Gold Tour Issue X100 (48-56), True Temper Dynamic Gold Tour Issue S400 (60)
Putter: Scotty Cameron T-5 Proto
Grip: Scotty Cameron Black Baby T
Grips: Golf Pride Tour Velvet Plus4
More photos of Kevin Tway’s WITB in the forums.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Editor’s note: This is an excerpt from a piece our Andrew Tursky originally wrote for PGATour.com’s Equipment Report. Head over there for the full article.
The timing of Lowry’s putter changeup was curious: Was he just using a Spider putter because he was paired with McIlroy, who’s been using a Spider Tour X head throughout 2024? Was Lowry just being festive because it’s the Zurich Classic, and he wanted to match his teammate? Did McIlroy let Lowry try his putter, and he liked it so much he actually switched into it?
Well, as it turns out, McIlroy’s only influence was inspiring Lowry to make more putts.
When asked if McIlroy had an influence on the putter switch, Lowry had this to say: “No, it’s actually a different putter than what he uses. Maybe there was more pressure there because I needed to hole some more putts if we wanted to win,” he said with a laugh.
To Lowry’s point, McIlroy plays the Tour X model, whereas Lowry switched into the Tour Z model, which has a sleeker shape in comparison, and the two sole weights of the club are more towards the face.
Lowry’s Spider Tour Z has a white True Path Alignment channel on the crown of his putter, which is reminiscent of Lowry’s former 2-ball designs, thus helping to provide a comfort factor despite the departure from his norm. Instead of a double-bend hosel, which Lowry used in his 2-ball putters, his new Spider Tour Z is designed with a short slant neck.
“I’ve been struggling on the greens, and I just needed something with a fresh look,” Lowry told GolfWRX.com on Wednesday at the 2024 Wells Fargo Championship. “It has a different neck on it, as well, so it moves a bit differently, but it’s similar. It has a white line on the back of it [like my 2-ball], and it’s a mallet style. So it’s not too drastic of a change.
“I just picked it up on the putting green and I liked the look of it, so I was like, ‘Let’s give it a go.’”
Read the rest of the piece over at PGATour.com.
- LIKE1
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
Webb Simpson equipment Q&A: Titleist’s new 2-wood, 680 blade irons, and switching to a broomstick Jailbird
With seven career wins on the PGA Tour, including a U.S. Open victory, Webb Simpson is a certified veteran on the course. But he’s also a certified veteran in the equipment world, too. He’s a gearhead who truly knows his stuff, and he’s even worked closely with Titleist on making his own custom 682.WS irons.
On Wednesday at the 2024 Wells Fargo Championship, I caught up with Simpson to hear about his experience with Titleist’s new prototype 2-wood, how Titleist’s 680 Forged irons from 2003 ended up back in his bag, and why he’s switching into an Odyssey Ai-One Jailbird Cruiser broomstick putter this week for the first time.
Click here to read our full story about Simpson’s putter switch on PGATOUR.com’s Equipment Report, or continue reading below for my full Q&A with Simpson at Quail Hollow Club on Wednesday.
See Webb Simpson’s full WITB from the 2024 Wells Fargo Championship here
GolfWRX: It seems like you’ve been a little all over the place with your irons in the past six months or so, and now going back to the 680’s. Is that just a comfort thing? What’s been going on with the irons?
Webb Simpson: Titleist has been so great at working with me, and R&D, on trying to get an iron that kind of modernizes the 680. And so the 682.WS took the T100 grooves, but kinda took the look and the bulk and the build of the 680’s into one club. They’re beautiful, and awesome looking. I just never hit them that well for a consistent period of time. It was probably me, but then I went to T100’s and loved them. I loved the spin, the trajectory, the yardage, but again, I never went on good runs. Going through the ground, I couldn’t feel the club as well as with the blade. So last week, I’m like, ‘Alright. I’m gonna go back more for…comfort, and see if I can get on a nice little run of ball striking.’
So that’s why I went back.
View this post on Instagram
OK, that makes sense. I know you had done some 2-wood testing recently. Is that in the bag right now?
It’s like day-by-day. I used it at Hilton Head every day. Valero, I used it one round. And this week, me and my caddie will do the book every morning, and if it’s a day where we think we need it, we’ll just put it in and take the 3-wood out. I love it because it’s a super simple swap. Like, it doesn’t really change much.
Yeah, can you tell me about that club? I mean, we don’t really know anything about it yet. You know? I haven’t hit it or anything, obviously.
It has grooves like a 3-wood. Spin is perfect. And it’s honestly, like, everything is in the middle of a 3-wood and driver number. Trajectory, spin, carry, all of it. So, a Hilton Head golf course is almost too easy to talk about because, you know, there, so many holes are driver 3-wood.
Valero, our thinking was we had two par-5’s into the wind, and we knew that it would take two great shots to get there in two. So instead of hitting driver-driver, we just put it in. And I used it on those holes.
Hilton was a little easier because it was off-the-tee kind of questions. But Colonial will be a golf course where, you know, there’s a lot of driver or 3-woods. It’s kind of like a backup putter or driver for me now. I’ll bring it to every tournament.
So it’s, like, in your locker right now, probably?
Well, it would be. It’s in my house [because Webb lives near by Quail Hollow Club, and is a member at the course.] It’s in the garage.
Oh, yeah, that’s right. Do you know what holes you might use it out here if it goes in play?
Potentially 15, depending on the wind. Second shot on 10. Could be 14 off the tee. The chances here are pretty low (that he’ll use the 2-wood). But, like, Greensboro would be an awesome club all day. I’m trying to think of any other golf courses.
There’s plenty that it’ll be a nice weapon to have.
It’s interesting, the wave of 2-woods and mini drivers. Like, it’s just really taken off on Tour, and all the companies have seemed to embrace it.
Yeah. The thing I had to learn, it took me, like, at least a week to learn about it is you gotta tee it up lower than you think. I kept teeing it up too high. You need it low, like barely higher than a 3-wood. And that was where I got optimal spin and carry. If you tee it up too high, you just don’t get as much spin and lose distance, I don’t know if that’s just a mini driver thing.
And you obviously have a Jailbird putter this week. What spurred that on?
Inconsistent putting. I’m stubborn in a lot of ways when it comes to my equipment, but I have to be open minded – I just hadn’t putted consistently well in a while. And I’m like, ‘Man, I feel my ball-striking coming along. Like I feel better; for real, better.’
If I can just get something in my hands that I’m consistent with. Being on Tour, you see it every year, guys get on little runs. I can put together four to five tournaments where I’m all the sudden back in the majors, or in the FedExCup Playoffs. You can turn things around quick out here. I’m like, ‘Man, whatever’s going to get me there, great.’
My caddie, David Cook, caddied for Akshay at the Houston Open and he putted beautifully. Then, I watched Akshay on TV at Valero, and he putted beautifully. And, I’m like, ‘I’m just going to try it.’
I’ve never tried it for more than a putt or two, and I just ordered what Akshay uses. It was pretty awkward at first, but the more I used it, the more I’m like, ‘Man, it’s pretty easy.’ And a buddy of mine who’s a rep out here, John Tyler Griffin, he helped me with some setup stuff. And he said at Hilton Head, he wasn’t putting well, then tried it, and now he makes everything. He was very confident. So I’m like, ‘Alright, I’ll try it.’”
And you’re going with it this week?
Hundred percent.
Alright, I love it. Thank you, I always love talking gear with you. Play well this week.
Thanks, man.
See Webb Simpson’s full WITB from the 2024 Wells Fargo Championship here
- LIKE30
- LEGIT3
- WOW1
- LOL2
- IDHT0
- FLOP0
- OB0
- SHANK3
Dave Portnoy places monstrous outright bet for the 2024 Masters
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
Two star names reportedly blanked Jon Rahm all week at the Masters
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
What we know about Bryson DeChambeau’s 3D-printed Avoda irons
Kevin Tway WITB 2024 (May)
Kevin Tway what’s in the bag accurate as of the Wells Fargo Championship. More photos from the event here. Driver:...
Matthieu Pavon WITB 2024 (May)
Pavon’s WITB accurate as of the Wells Fargo Championship. More photos from the event here. Driver: Ping G430 Max (9...
WITB Time Machine: Rory McIlroy’s winning WITB, 2015 Wells Fargo Championship
Then-No. 1 player in the world Rory McIlroy began the week at the Wells Fargo Championship at 3-1 odds, if...
Akshay Bhatia WITB 2024 (May)
Akshay Bhatia what’s in the bag accurate as of the Wells Fargo Championship. Bhatia is deciding between drivers. More photos...
-
19th Hole3 weeks agoJustin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole3 weeks ago‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks agoLET pro gives detailed financial breakdown of first week on tour…and the net result may shock you
-
19th Hole3 days agoReport: LIV star turns down PGA Championship invite due to ‘personal commitments’
-
19th Hole1 week agoGary Player claims this is what ‘completely ruined’ Tiger Woods’ career
-
Whats in the Bag2 weeks agoTeam McIlowry (Rory McIlroy, Shane Lowry) winning WITBs: 2024 Zurich Classic
-
Equipment1 week agoGolf fans left surprised by LIV’s choice of course for its 2024 individual championship event
-
Equipment2 days agoDetails on Justin Thomas’ driver switch at the Wells Fargo Championship
chris crawford
Jul 17, 2013 at 9:48 am
i used to have a adila 70x protopype but there hard to pick up these days with it being made in 2005, will the tour green play similar to the protopype?
Pernell Stoney
Jun 20, 2013 at 1:54 am
I am looking for 5.5 rifle shafts ( project x)
Joe Golfer
Jun 15, 2013 at 1:37 am
I wonder what it actually costs Aldila to make these shafts.
One used to be able to purchase a high end shaft at a reasonable price.
They talk about the original Aldila NV green shaft. I recall that shaft starting out at around $88. After about a year, the price had dropped to around $54 after newer models (not necessarily better) had entered the Aldila group.
The UST ProForce (gold and purple) shaft was super popular for years, and it sold for around $34.
The Grafalloy Prolite was the most popular shaft for several years, and it sold for $45.
So what exactly makes these cost $350, other than that other companies are charging that much for some of theirs?
Wonder how long it will be before we see a similar looking shaft in OEM drivers, but the shaft will say “designed exclusively for (insert name of company making driver)” rather than it actually being the “real deal” shaft.
Lyle
Jun 18, 2013 at 9:29 pm
You are so right. The specs may even be the same so what exactly is the reason the price has gone crazy? In some cases, OEM’s have the EXACT shaft in their stock equipment and you can buy an entire club for the same cost as the shaft. This has nearly totally eliminated reshafts. When they stop making some of those more reasonably priced shafts, we’ll just throw away a driver with a broken shaft. It will be silly to repair it when you can just buy a newer version.
DenverB
Jun 14, 2013 at 12:23 pm
Sad to hear they are designed to swingweight properly in 45-46 inch drivers. That is the standard now?
Look at the guys on tour, they are almost all between 44 and 45 inches.
Brian
Jun 14, 2013 at 12:32 pm
While they’re deesigned to play in longer lengths, like all shafts they can be cut down to play shorter – you just need to add weight to the head to get the swingweight you desire. This can be done in many ways – shaft insert weights, adjustable / removable weights, or hot melt in the head. I’ve done all 3 – but usually not all on the same club!
naflack
Jun 14, 2013 at 1:52 pm
I have no interest in making the head even heavier and/or messing with the club heads center of gravity. If i’m dropping this kind of dough I think slapping tape in various areas should not be necessary.
keith
Jun 14, 2013 at 12:47 am
Yeah, I was really hoping this would be like a $150 type of shaft. 3.5 bills is just way to much for a shaft IMO…Looks sweet though,kudos to Aldila.
J
Jun 12, 2013 at 10:15 pm
And they join the 300$ shaft prices..
Good for them… Bad for the public