Equipment
Vokey SM10 wedges – GolfWRX launch report
What you need to know: It’s hard to believe this is already the 10th iteration of Vokey’s Spin Milled wedges, which, in 2007, succeeded its 300 and 400 Series wedges. For 2024 and the new SM10 line, Bob Vokey and company made design tweaks targeting lower ball flight, enhanced feel, and greater spin, while, of course, seeking not to compromise the legacy DNA of the most-played wedge in professional golf for the past 20 years.

Vokey SM10 wedges: What’s new, key technology
Progressive center of gravity: Center of gravity is strategically placed for each wedge loft to deliver a lower ball flight and more trajectory control. Titleist says this produces a more solid feel and tighter shot dispersion. CG is lower in 46- 52-degree wedges and closer to the face. Vokey testing with tour pros showed this eliminated “excessive draw movement” and enhanced feel. For 54- 62-degree wedges, CG is higher and more forward in the face to produce a more piercing ball flight and aid golfers in squaring up the face.
Refined Spin Milling: Vokey engineers have given attention to every groove on the face, cutting each based on loft and finish. The company’s TX9 grooves on the stronger-lofted wedges are narrower and deeper, and wider and shallower on the higher-lofted wedges. Additionally, a parallel micro-texture between grooves aids spin on off-center shots. Completing the process, Vokey adds a high-frequency heat treatment to the impact area for greater groove edge durability. The company touts higher, more consistent spin across the lineup.
Shaping, profile adjustments: Tailored for a different look in lower versus higher-lofted wedges based on player feedback. 46- 52-degree wedges have smaller profiles and straighter leading edges. 56- 62-degree wedges have larger profiles and more rounded leading wedges to increase the clubs’ versatility.
Grinds aplenty: The SM10 lineup features six grinds: F, S, M, K, T, and D, which contribute to a total of 25 unique loft, bounce, and grind configurations to dial in the optimal wedge setup for every player. Given the abundance of options available, the company is keen to emphasize the importance of proper wedge fitting.

What Titleist says
“I always tell players that the most important club in the bag is confidence,” Master Craftsman Bob Vokey said. “Getting fit for each of your wedges, and learning how to use them in different situations, is one of the fastest ways to gain confidence around the green.”
“Player feedback drives our development process,” said Corey Gerrard, Director of Marketing, Vokey Wedges. “Whether we’re talking with tour professionals or dedicated amateurs, every bit of player insight matters. All the advances we made to SM10, from looks and feel to grind options and desired flight windows, reflect that player input.”
“The best players in the world know exactly what they want from their wedges. The smallest details matter to them and they are very specific when it comes to describing the improvements they want to see,” said Aaron Dill, Director of Vokey Player Relations. “Their feedback is invaluable. We are constantly learning from them and it’s that constant collaboration which allows us to get even better with each new generation.”

Club Junkie’s take
On Tour with Andrew Tursky
Titleist’s “Tour Validation” process for its new SM10 wedges officially began at The 2024 Sentry in Hawai’i to start the year, and a number of top players upgraded in the first week, including Jordan Spieth (who’s especially particular about his wedges), Ludvig Aberg, Cam Young, J.T. Poston and Tom Kim, to name a few.

Now that more and more players have had the opportunity to see and test the new SM10 wedges at the Sony Open and the American Express, it’s clear that the new models are the clear choice for most Titleist staffers. It’d be more difficult to find players who haven’t switched into them, than to find those who have.
Notably, Justin Thomas was quick to upgrade at the 2024 American Express for his 2024 PGA Tour debut, and his set of SM10 wedges are decked out with new red “Radar” club stampings. As a reminder, “Radar” is one of Thomas’ nicknames, which he earned by being deadly accurate with his wedges.

For most PGA Tour players that GolfWRX.com has spoken to about the wedges, the switch into SM10 has been seamless. The bounce options, head profiles, finishes, and overall feel of the heads hasn’t changed much from the SM9 line, according to the players, but the lower-lofted wedges have shown improvement in forgiveness, and fly straighter on full shots. The change in the weight placement throughout the SM10 wedge lineup has much to do with the performance improvement, but it doesn’t negatively impact short game shots on the higher-lofted wedges.
Here was Spieth’s analysis of the SM10 wedges he switched into at The Sentry:
“I think the biggest difference is when you get to the gap wedge and pitching wedge on the full shots,” Spieth told GolfWRX.com. “I think the sweet spot’s been moved; it’s bigger and it’s moved a little to where any potential over-hook is almost eliminated, which is really nice. You can step up with a left pin and be pretty aggressive.
“Other than that, they look great. I’m pretty particular with my 60. It isn’t always an ‘SM,’ sometimes it’s a separate prototype version, but this time I’m right into the SM10. It looks really good to me. The biggest thing that [Vokey Tour rep Aaron Dill] told me was that as I start to hit those longer shots, they won’t produce the odd outliers that overturn to the left.”

Our biggest takeaway from the PGA Tour players is this: There’s essentially no reason NOT to switch into the SM10 wedges, since they provide all the benefits of SM9, such as looks, feel, spin and performance, except the SM10 wedges perform slightly better on full swing shots.
For most of the world’s best, it’s been a no-brainer to upgrade.
Check out all of the loft and bounce options from the Titleist truck at The American Express last week.
Pricing, specs, availability
Finishes: Tour Chrome, Jet Black, Nickel, Raw (custom only)
Loft, grind and bounce options: 46.10F, 48.10F, 50.08F, 50.12F, 52.08F, 52.12F, 54.08M, 54.10S, 54.12D, 54.14F, 56.08M, 56.10S, 56.12D, 54.14F, 58.04T, 58.08M, 58.10S, 58.12D, 58.14K, 60.04T, 60.08M, 60.10S, 60.12D, 60.14K, 62.08M
Stock shaft: True Temper Dynamic Gold S200
Stock grip: Titleist Universal 360 Grip
Price: $189
Pre-sale/at retail: 2/15, 2/8
Personalization, custom options:
- Stamping options: 10-character straight/freestyle stamping; 15 characters around the toe; and two lines of 10 characters each
- Custom paintfilled loft, bounce, grind markings, and BV Wings logo
- Six unique toe engravings
- HandGround options for grind personalization
- Vokey WedgeWorks Flight Lines
More photos of Vokey SM10 wedges
46-10F

52-08F

54-08M

56-10S

56-12D

58-04T

60-04T

Equipment
Interesting clubs at top of bag – GolfWRXers discuss
In our forums, users are talking about top of bag setups that are non-traditional or thought-provoking in some way. Original poster @SuperSpurs106 inquired about other members who might use unorthodox set-ups to help with gapping issues or weak spots.
They wrote:
“I currently have a PING G430 driver, TM Qi35 3W and a TM Qi4D 7W. Driver and 7W are fine but can’t get on with my 3W and have always struggling with this club over the years. Thinking of adding a 2H which I know would look odd. Just wondering if anyone else had a weird set up at the top of their bag?”
Our members in the forum have offered up their thoughts and personal experiences with non-traditional top of bag set-ups, and their reasoning for thinking outside of the box to begin with. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- BowMain42: “Don’t worry about what “looks” odd. If the club does what you need it to do, it’s the right club.”
- scooterhd2: “I cant hit 3 woods either. Thats why I roll with a unicorn XL Hibore 2 wood. 400 cc head at 16 degrees of loft and its just a monster 3 wood off the tee. Off the deck, we are playing the f6 baffler. 5 wood at 41.75 inches and its easy to control.”
- phizzy30: “I had driver, 3 metal, 2/4 hybrid once upon a time as a higher ss player. 4 hybrid is gone and in place is a driving iron nowadays. I don’t think what you’re proposing is weird in anyway, however the yardage gap might be glaringly huge between driver and 2 hybrid. What is it about your 3 metal that has got you all messed up? You could always go 4 metal with shorter shaft and see if that works.”
Entire Thread: “Interesting clubs at top of bag”
If you aren’t a member, join us in the GolfWRX forums today!
Equipment
Members of the Mini Driver Club – GolfWRXers discuss
In our forums, one user has gone searching for fellow users of a mini driver. In a post, @TightFade asked for other mini driver users to chime in with their weapon of choice, the reason for employing a mini, and what club follows it in the bag.
@TightFade asked:
“What mini are you playing? What spot in the bag did it take over? What’s the next club after it? For me: Elyte mini 13.5. Replacing 3w. Next up club looks like it’ll be 5w.”
Our members in the forum have been sharing their own bag setups featuring the mini driver, and the various reasons they purchased one in the first place. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- RCGA: “Ping G430 Max 12* ‘Thriver.’ Next club is a 4w and 2i (I play a weird course).”
- JMB3: “R7 at 12.75 with Diamana BB 63s. 3w replacement. Next Club: Elyte Ti 5w at 17*.”
- ColdOkieGolf: “R7 15.5 turned down to 13.5 It replaces the 3w. I found it surprisingly easy to hit off the deck, and it’s very rare that I need or want to hit something beyond 250 from the fairway, so next club is my 7w.”
- ChaosTheory: “I’m sub-90 MPH with driver. But I’m able to hit DOD. I have been wanting something like the R7 15.5, so I just ordered one. I have a spot in the bag so nothing has to go. But I could see it replacing my trusty 4 wood, which I never use for approach shots. Just tee shots and lay ups. If I drop the 4 wood, I will turn my 7 wood down to ~20 degrees and will have good gaps. I recently tried a thriver build: 12 degree driver turned to 14, with a heavier 44 inch shaft and added head weight. I hit it great. Very accurate and not overly high, but the problem was that it sometimes went as far as a typical drive. And that’s not what I needed. So I will probably turn the 15.5 up to 16.5 or even 17.5. It’s all theoretical at this point. ?”
Entire Thread: “Members of the Mini Driver Club…Check In.”
If you aren’t a member, join us in the GolfWRX forums today!
Whats in the Bag
Chris Gotterup WITB 2026 (June)
- Chris Gotterup had >14 clubs in his bag when photographed prior to the Memorial Tournament.
Drivers: TaylorMade Qi4D (8 degrees), Ping G440 LST (9 degrees @8), Ping G440 LST (7.5 degrees)
Shafts: Project X HZRDUS Smoke Grey 6.5 TX 70 g, Project X HZRDUS T1100 Handcrafted 6.5 TX 70 g, Project X HZRDUS Smoke Grey 6.5 TX 70 g


Mini driver: TaylorMade BRNR (13.5 degrees)
Shaft: Project X HZRDUS Black TX 80 g

5-wood: TaylorMade Qi4D (18 degrees)
Shaft: Mitsubishi Chemical Diamana WB Wood Shaft 83 TX

7-wood: TaylorMade Qi4D (21 degrees)
Shaft: Mitsubishi Diamana WB Wood Shaft 83 TX

Irons: TaylorMade P770 (3), Bridgestone Tour B 220 MB (4-9)
Shafts: KBS C-Taper 130 X


Wedges: TaylorMade MG5 (46, 52, 56, 60)
Shafts: KBS C-Taper 130 X, True Temper Dynamic Gold Tour Issue X100

Putter: TaylorMade Spider X Tour
Grip: SuperStroke Zenergy Pistol 2.0

Grips: Golf Pride Z Grip Cord
Ball: Bridgestone Tour B X Mindset
Check out more in-hand photos of Chris Gotterup’s clubs here.
-
News3 days agoRussell Henley’s winning WITB: 2026 Charles Schwab Challenge
-
Whats in the Bag2 weeks agoAaron Rai’s winning WITB: 2026 PGA Championship
-
Tour Photo Galleries2 weeks agoPhotos from the 2026 CJ Cup Byron Nelson
-
Equipment14 hours agoDetails on Jason Day’s latest prototype Avoda iron setup
-
Equipment2 weeks agoCJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
-
News6 days agoCharles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
-
Equipment1 week agoDetails on J.J. Spaun’s surprise putter switch
-
Popular Photo Galleries1 week agoPhotos from the 2026 Charles Schwab Challenge

Pingback: GolfWRX Members Choice presented by 2nd Swing: Best wedges of 2025 – GolfWRX
Pingback: 2024 Vokey SM10 wedges: Club Junkie’s full fitting video – GolfWRX
Paul Harrison
Jan 23, 2024 at 2:36 am
Edrick’s TM custom designed wedges are $199! Try that on for size!
Will
Jan 22, 2024 at 9:59 pm
Clearly no one who has has the wedges want to tick off Titleist. I haven’t been able to find a single video comparing SM 10 to the SM 9. I wish when people got the new product they would compare them to the old product and see if there were any “real” differences. Also, another $10 price increase is nuts! I may just replace my worn SM 9s with new $150 SM 9s. $40 difference between the 2 – hard pass on SM 10!
Kaven
Jan 22, 2024 at 7:27 pm
Do you know why they’re stop milled grind face ?
Charles
Jan 22, 2024 at 6:44 pm
They look like Kirkland wedges
ChazzyChazChaz
Jan 22, 2024 at 4:10 pm
Nothing has changed here….Progressive CG movement, grinds, shafts…..It’s all the same for the last several iterations, except for the price!!! Of course the Titleist players are going to move into this model immediately, there is zero risk and cost to them. I have no problem going for discounted SM9’s or even finding used, mint SM8’s or 7’s.
Jake
Jan 22, 2024 at 3:36 pm
I’d love to see durability and cost addressed. It makes zero sense to forge clubs out of soft metals other than it encourages golfers to buy more when their precious clubs look terrible after a season
dat
Jan 22, 2024 at 1:16 pm
that price is insane.
DukeOfChinoHills
Jan 22, 2024 at 12:49 pm
$189 for a wedge is getting crazy.