Equipment
Tech Talk: TaylorMade SpeedBlade irons
Clank. It’s a sound golfers hate, and the main criticism of TaylorMade’s RocketBlades irons. But despite their awkward sound, the distance-happy RocketBladez irons sold like hotcakes and became the No. 1-selling iron in golf.
If it ain’t broke don’t fix it, right? Wrong. In true TaylorMade style, the company decided to revamp the construction of the new SpeedBlades irons, creating a set of clubs that not only feel better, but look and sound better as well.
The most noticeable structural change engineers made the design of SpeedBlade was removing the chunky toe section on the rear part of the club. That allowed them to place more weight lower and deeper in the head, which according to TaylorMade Product Creation Manager Brian Bazzel gives SpeedBlade the lowest center of gravity of any TaylorMade iron ever produced. The lower CG helps most with forgiveness on shots hit on the bottom part of the face, where Bazzel said 72 percent of golfers contact the ball.
[youtube id=”_k9unWck_wY” width=”620″ height=”360″]
Click here to read about the SpeedBlade iron launch at the BMW Championship.
But again, SpeedBlade is a TaylorMade iron, and it’s not the company’s style just to make one change to a new product. The iron’s SpeedPocket, a slot in the sole of the iron, is now longer and wider than it was in the RocketBladez, particularly in the heel and toe sections. That allows the face to flex more on shots hit on those areas, enhancing ball speed to help mishits leave the face with a similar velocity as shots struck in the center.
The more important change to the SpeedPocket, however, is what golfers can’t see. The slot is extended all the way through the sole of the iron, as well as in three different spots on the back part of the irons to give the structure more flex. That creates a larger area of maximum spring-like effect, or a larger sweetspot. (Note: the SpeedPocket is only used in the design of the 3 through 7 irons, where Bazzel said it is most important for forgiveness and ball speed).
Above: A SpeedBlade 6 iron at address.
According to Bazzel, the lower CG and larger, more effective SpeedPocket allowed TaylorMade to make a change that most golfers will notice immediately: TaylorMade made them smaller. Adding to the compact look of the SpeedBlade is its new two-tone, satin-nickel-chrome finish with a dark smoke plating that creates more visual shrinkage at address. And yes, the combination of the new struction, dampening mechanism and SpeedPocket filler make the irons noticeably less harsh at address, turning the RocketBladez’s clank into more of a SpeedBlade smoosh.
The SpeedBlade irons will hit shelves on Oct. 4. They’ll cost $799 for eight irons with 85-gram proprietary steel shafts (R and S flexes), and $899 with 65-gram graphite shafts (L, M, R and S flexes).
Check out the spec of the new irons below, as well as more photos of the SpeedBlade irons and wedges in the gallery.
Click here to see what GolfWRX members are saying about the SpeedBlade irons in the forum.
Click here to see what GolfWRX members are saying about the SpeedBlade irons in the forum.
Driver: TaylorMade Qi4D LS (8 degrees)
Shaft: Fujikura Ventus TR Blue 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus Black 9 TX
Irons: TaylorMade P770 (3), TaylorMade P7CB (4), TaylorMade P7TW (5-PW)
Shafts: Fujikura Ventus Black HB 10 X, True Temper Dynamic Gold X100
Wedges: TaylorMade Prototype (50-SB09), TaylorMade MG5 (56-HB12, 60-LV07)
Shafts: True Temper Dynamic Gold S400
Putter: TaylorMade TP Juno
Ball: Titleist Pro V1x
Grips: Golf Pride Tour Velvet Cord
Check out more in-hand photos of Christiaan Maas’ clubs here.
TaylorMade Golf’s MySpider program underwent a substantial overhaul over the last month. Firstly, the company launched the option to customize the Spider ZT model, and now the program has returned with the MySpider Tour and MySpider Tour X.
The revamped page now gives golfers complete control over every visual and functional detail of their putter on the popular Tour and Tour X head, with every cosmetic idea thought of. In MySpider Tour, golfers can choose from four head finishes, 16 paint fill colors, nine Surlyn face insert colors, three aluminum insert options, six sightline configurations, and four hosel options — L-neck, small slant, double bend, center shaft. Six sightline options are available in MySpider Tour, including the optically engineered True Path alignment system. MySpider Tour X gives builders the option of four head finishes, four hosel configurations, and five sightline options, also including True Path alignment.
One of the more interesting features of the new MySpider program is the availability of three distinct face insert options. Along with the usual Surlyn Pure Roll insert trusted by Scottie Scheffler and Rory McIlroy, which can be customized from nine colors, golfers can now also select firmer options. Two are offered with the black aluminum Pure Roll insert, slightly firmer than the traditional insert, or for the firmest feel, golfers can choose from two colors of milled aluminum inserts.
Another fun addition to the MySpider Tour is the ability to use the “Tommy Sightline.” The custom alignment aid design, which was first drawn onto Tommy Fleetwood’s putter by PGA Tour Rep James Holley, is based on the milled sightline on his Spider ZT head. There are five shorter lines on the left and right of a longer central line serving as the traditional short line alignment aid.
See below for the full specifications sheet for MySpider Tour and Tour X:
MySpider Tour
MySpider Tour X
Equipment
Then and now: Comparing Rory McIlroy’s current setup to his record-breaking 2019 Canadian Open victory
In Rory McIlroy’s first appearance at the 2019 RBC Canadian Open, he crushed the record books to earn his 16th PGA Tour title in dominating fashion, winning by seven shots over Shane Lowry and Webb Simpson.
McIlroy’s score of 22-under-par 258 is the lowest 72-hole score to date at the Canadian Open, and his closing 61 is also the best final-round score in the history of one of golf’s oldest tournaments. Finally, with his win in 2019, McIlroy became only the sixth player to win the career Triple Crown, adding to his victories at the U.S. Open in 2011 and The Open Championship in 2014, joining Tommy Armour, Walter Hagen, Arnold Palmer, Lee Trevino and Tiger Woods in a coveted list.
So, with that, why not compare his current setup to the clubs he used to break all the records?
Driver
2019: TaylorMade M5 (9 degrees), Shaft: Mitsubishi Tensei CK Pro White 70 TX
2026: TaylorMade Qi4D (9 degrees @8), Shaft: Fujikura Ventus Black 7X (45 5/8 inches)
McIroy led the Tour in Strokes Gained: Off-the-Tee in 2019; he’s doing the same in 2026. Between now and then, McIlroy has switched from the Mitsubishi Tensei CK Pro White 70 TX (a shaft with slightly more feeling in the tip) to the original Fujikura Ventus Black 7X, having just made the change to the heavier version from playing the 60X.
What’s interesting about McIlroy’s 2019 setup is that the weighting on his driver is actually set in the high-draw setting, using the T-Track weighting system, whereas in the Qi4D, he’s currently using a heavily rear-weighted setup. (Two 13-gram weights in the rear and only two 4-gram front weights.)
The TaylorMade M5 driver he played in during his Canadian Open win was the company’s first head that they claimed to design to initially exceed the USGA’s COR limit, and then injected with tuning resin to bring it back in bounds.
Fairway woods
2019: TaylorMade M6 3-wood (15 degrees), Shaft: Mitsubishi Tensei CK Pro White 80 TX; TaylorMade M5 5-wood (19 degrees), Shaft: Mitsubishi Tensei CK Pro White 90 TX
2026: TaylorMade Qi4D 3-wood (15 degrees), Shaft: Fujikura Ventus Black 8X; TaylorMade Qi4D 5-wood (18 degrees), Shaft: Fujikura Ventus Black 9X
The TaylorMade M6 fairway wood that McIlroy was using during the 2019 season is still in the bag of some of the best golfers on Tour in 2026. Just check out Justin Rose’s winning setup from the Farmers Insurance Open earlier this year. This year, though, McIlroy has still been searching for his top-end-of-the-bag setup, having played both the new Qi4D and the Qi10, which he won the Masters with.
The same shaft swap can be seen in the fairway woods as the driver, along with slightly less loft on the 5-wood.
Irons
2019: TaylorMade P750 (4) Buy here, TaylorMade P730 (5-9), Shafts: Project X 7.0
2026: TaylorMade P760 (4), TaylorMade Rors Proto (5-9), Shafts: Project X 7.0
The biggest difference between McIlroy’s custom set and the stock P730s is the groove design. While the P730s were constructed with 14 MX-9 grooves on their milled faces, McIlroy’s proto heads instead use the higher-spinning, 16-groove layout of the TW2 grooves. Other big differences between the sets are that McIlroy’s 7- and 8-irons have thinner toplines, are 1 degree stronger in loft, and are 1/4 inch longer than the original P730 builds.
With McIlroy’s 4-iron, the switch from P750 to P760 sees a transition to a two-piece construction with Speed Foam in it, which allows McIlroy to launch the ball slightly higher, with more workability.
Wedges
2019: TaylorMade Milled Grind (48-09SB), TaylorMade MG Hi-Toe (52-09SB, 56-09SB, 60-LB09), Shafts: Project X Rifle 6.5
2026: TaylorMade MG5 (46-09SB, 50-09SB, 54-11SB, 60-08LB @61), Shafts: Project X 6.5 (46-54), Project X 6.5 Wedge (60)
Between 2019 and 2026, McIlroy’s focus on his short game has been much more apparent. It was the reason why he switched back to the TP5 golf ball, to help with launch, spin and control with his wedges leading up to his career Grand Slam victory in 2025. The most apparent changes to McIlroy’s wedge setup are his lofts and bounce. He’s slowly delofted his pitching to a sand wedge, but has increased the loft on the lob wedge, bending his current 60-degree to 61. With that, adding more loft to his lob wedge also slightly increases the bounce and leading-edge sit point, so, as a result, he plays a lower-bounce lob wedge compared to 2019. The MG5 wedges are also softer than the first Milled Grind option from 2019. McIlroy also no longer plays the full-face grooves found on the Hi-Toe.
Putter
2019: TaylorMade Spider X
2026: TaylorMade Spider Tour X
Notice anything similar. Yes, the copper finish on Rory McIlroy’s Spider X putter in 2019 is a slightly more reflective finish than the recently released torched PVD finish. McIlroy was using the True Path alignment system, but now uses only a single white sightline.
Ball
2019: 2019 TaylorMade TP5 (#22)
2026: 2025 TaylorMade TP5 (RORS)
As mentioned above, McIlroy had transitioned from the TP5 to TP5x golf ball since his victory in Canada in 2019, but now is black with the same style of golf ball as his victory at Hamilton Golf & Country Club.
Grips
2019: Golf Pride Tour Velvet Cord
2026: Golf Pride MCC
Interesting, McIlroy actually used Golf Pride’s Tour Velvet Cord grips during his victory in 2019 (it was during a 2+ year switch to the corded TV) as opposed to his usual MCC grips, which he has played for most of his career.
What’s the story behind Webb Simpson’s custom-stamped irons?
Memorial Tournament Tour Report: Rory McIlroy, Cameron Young switch up drivers, and more
Cadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
Russell Henley’s winning WITB: 2026 Charles Schwab Challenge
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
Best irons 2026: Best irons overall, most forgiving irons, and more
J.T. Poston’s winning WITB: 2026 Memorial Tournament
Aaron Rai’s winning WITB: 2026 PGA Championship
Cameron Young’s winning WITB: 2026 Cadillac Championship
Details on Jason Day’s latest prototype Avoda iron setup
Christiaan Maas WITB 2026 (June)
Driver: TaylorMade Qi4D LS (8 degrees) Shaft: Fujikura Ventus TR Blue 6 X 3-wood: TaylorMade Qi10 (15 degrees) Shaft: Fujikura Ventus Black...
Ryan Palmer WITB 2026 (June)
Driver: Callaway Quantum Triple Diamond (9 degrees) Shaft: Project X HZRDUS Smoke Blue RDX 60 TX 3-wood: TaylorMade Qi10 (15 degrees) Shaft:...
Bud Cauley WITB 2026 (June)
Bud Cauley had >14 clubs in his bag when photographed prior to the Memorial Tournament. Driver: Titleist GTS2 (8 degrees) Shaft: Fujikura...
Hannah Green WITB 2026 (June)
Driver: Titleist GTS3 (10 degrees, D4 SureFit setting) Shaft: Mitsubishi Chemical Diamana RB 53 S 3-wood: Titleist GT3 (15 degrees,...
-
Equipment6 days agoMemorial Tournament Tour Report: Rory McIlroy, Cameron Young switch up drivers, and more
-
News2 weeks agoRussell Henley’s winning WITB: 2026 Charles Schwab Challenge
-
Equipment4 days agoBest irons 2026: Best irons overall, most forgiving irons, and more
-
Whats in the Bag4 days agoJ.T. Poston’s winning WITB: 2026 Memorial Tournament
-
Equipment1 week agoDetails on Jason Day’s latest prototype Avoda iron setup
-
Equipment3 weeks agoCJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
-
News2 weeks agoCharles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
-
Equipment2 weeks agoDetails on J.J. Spaun’s surprise putter switch
james saden
Apr 22, 2014 at 8:14 am
Was wondering how durable the polymer in the speed pocket is. I don’t store my clubs in a climate controled environment. Is it affected by heat/cold? If the pocket fails wouldn’t the face deform? Only a two year warranty. $800 is a lot to spend. The clubs I am using now have lasted six years.
Conrad
Sep 17, 2013 at 2:49 pm
man my 4 iron is 24 degrees loft. thats between a 5 and 6 speedblade…
Ola scholander
Sep 18, 2013 at 11:30 am
So? Whats important for you, loft ( number) or trajectory ( result) ?
Frank Garrett
Sep 28, 2013 at 9:05 pm
Flat bill hat is the most important to me
Frank Garrett
Sep 28, 2013 at 8:37 pm
Yea those guys at intech need to get with the times
Ola
Sep 15, 2013 at 9:22 am
I dont get you guys. I hit higher and longer with these, with more control. Why should i not use them. The game is about least shots to get the ball in the hole. If you wanna use hogan edge irons from the late eighties, feel free to do so.
Secondly, id like a company to release new stuff when they have improvents, not waiting 2 years to put them in. When i buy my new club i want the latest, dont want a 2 year old product
Frank Garrett
Sep 28, 2013 at 8:35 pm
Don’t forget to click in at your taylormade job monday
Frank Garrett
Sep 28, 2013 at 8:39 pm
I meant clock in
Frank Garrett
Sep 28, 2013 at 9:04 pm
2 things …..
1st U couldn’t hit it high on the moon probably
2nd. It don’t matter about the least amount of strokes
u will still lie on the card
Kieran
Feb 10, 2014 at 12:46 pm
I didn’t know everyone on this forum worked for Golf Digest Magazine. WOW you guys should be the one reviewing the hot list.
Diff golfers want diff equipment and something must be right with these if they made gold on the hot lit. I somebody wants to enjoy the game and easy too hit irons to give them most enjoyment go ahead and use these clubs so what if there cranked. who cares.
I will see all you guys on the PGA tour then YES ? Oh no wait. Cowboys!!!
Jay Randle
Sep 15, 2013 at 12:34 am
Taylor Made needs to stop…pretty weak offerings. I mean the best companies put out the least amount of equipment…read Mizuno, Titleist
NG
Sep 19, 2013 at 1:13 am
What makes these the best companies? FYI- TMaG iron share is 32%
Frank Garrett
Sep 28, 2013 at 9:01 pm
Really? Mizuno??? Is it April 1st already
lloyd duffield
Sep 13, 2013 at 4:46 pm
it about time taylormade stopped messing around releasing new stuff every week and bring some decent forged irons out
Frank Garrett
Sep 28, 2013 at 8:58 pm
Come up with a catchy not-even-close name and they will
paulmuehlboeck99
Sep 13, 2013 at 3:42 pm
I think Taylormade doesn´t help the sport. They bend down de lofts by 4 degrees and make the shafts longer by inches. That doesn´t make it easier to swing
Frank Garrett
Sep 28, 2013 at 8:56 pm
U keep playin those spalding blades from ’74 and tell me how that helps
Bri-guy
Sep 13, 2013 at 12:06 am
Wow I just cannot wait until these things come out. Ill be the first to buy. I just love how Taylormade switched from the lime green to the blue, and changed the insert in the cavity a little and called it a speed blade. Trading in my rocketblades immediately. The fact it says speed blade means I have to gain some ball speed, right? Also, little will me buddies know that when I hit 2 less clubs than them, its really because my lofts are crazy strong. “Oh you hit a 7 iron from 165? I hit a 9 iron. I’m the man!” That is what I’ll be saying every Saturday. Also, I am so glad I did not pull the trigger on those ATV wedges. They were good when they were released 6 months ago or so, but these new speed blade wedges are so much better. Yea, they look like the same thing you may say to yourself, but you’d be wrong. These wedges are going to be bombers! SPEED and DISTANCE! Exactly what I want in a wedge. Distance control is so overrated. Thinking I will order a 89* wedge in these though for the 120 yard shots and in. I mean with how far these clubs go I’ll need something for those shorter shots.
MWP
Sep 13, 2013 at 10:18 am
oh my gosh bri-guy, I couldn’t agree more! But personally, I just cannot wait until they come out with the “speedbladez” putter! I mean i just can’t ever hit my putts fast enough or far enough! hopefully they’ll make some type of putter with a speed grove on the bottom so i can putt better. if they do, how could I not become a PGA Professional?!
And the really good news is that I ONLY use mallet putters. And since taylormade LOVES calling things bladez when they aren’t blades….. im sure the speedbladez putter will come as a mallet!!!! Oh man, gonna go work some overtime so I can save up for that bad boy when they release it.
paulmuehlboeck99
Sep 13, 2013 at 3:42 pm
you´re defenetly right man
Frank Garrett
Sep 28, 2013 at 8:53 pm
I think the putter will be an old skool l/r putter…. It’s gonna be called switchblade
Hyoga
Oct 1, 2013 at 3:54 am
Thank you bri-guy and MWP, you made my day.
virgil
Feb 9, 2014 at 2:48 pm
Hilarious
Mitch
Sep 12, 2013 at 11:16 pm
ill go find a stick and a rock in my backyard… tie them thangs together and call it the new and improved “twigzblades” and i’m starting to think somebody would buy them.
Frank Garrett
Sep 28, 2013 at 8:50 pm
Tell me where I can find the specs
Frank Garrett
Sep 28, 2013 at 8:51 pm
What’s the kick point of the stick
Mitch
Nov 7, 2013 at 12:09 pm
Kickpoint: No kickpoint, its a pretty thick stick
Loft: rock
Lie: rock
Length: 76″
Distance: infinite
JHM
Sep 12, 2013 at 11:05 pm
USGA Museum has a set of Ben Hogan’s irons. His 5 iron measured 37 inches and 30 degrees. Now that’s a 7 iron.
Frank Garrett
Sep 28, 2013 at 8:49 pm
Why don’t u post something about his driver being smaller than current ones
Jack
Sep 12, 2013 at 11:04 pm
I might have to see how much better these are over my AP2s, which I love.
Frank Garrett
Sep 28, 2013 at 8:48 pm
Yea I love my fingers stinging after I hit the ball too
Ryan
Oct 1, 2013 at 1:19 pm
Don’t really feel like you should blame the guy above you for your inability to hit irons half decently…
Frank Garrett
Oct 13, 2013 at 7:28 pm
Quit trolling ryan
corey
Sep 12, 2013 at 1:10 pm
a 17 degree 3 iron? slapping the number 3 on a 1 iron wont make it any easier to hit
Frank Garrett
Sep 28, 2013 at 8:47 pm
If youre complaining now just wait for 3 yrs when tm busts out negative loft long irons
Tim
Sep 12, 2013 at 10:40 am
Does anyone else find it weird that whenever equipment companies release new equipment, they always have somehow found a way to lower the CG and enlarge the sweetspot (enlarge the speed pocket in this case)? It’s even more disturbing that we, the naive consumers, will pay MSRP to purchase new equipment that’s so much better than the one before.
Frank Garrett
Sep 28, 2013 at 8:30 pm
Yea I have …. I think the cg of drivers gotta be outside the clubhead by now….. But I read a few weeks ago that they move it 1 milimeter
Jay
Sep 11, 2013 at 10:28 pm
Any word on when the SpeedBlade Tour model will be released?
Frank Garrett
Sep 28, 2013 at 8:41 pm
Probably a week before speedierbladez come out
Andrew Cain
Oct 8, 2013 at 10:47 am
TaylorMade Rep states Feb 2014 for Tour version
Frank Garrett
Oct 18, 2013 at 8:11 pm
Just like I said