Equipment
2024 PXG 0311 Gen7 irons, Sugar Daddy III wedges – GolfWRX Launch Report
What you need to know: PXG is back with a quest to maximize the performance of its irons and wedges with new materials and engineering aiming to make the best, and longest, irons and wedges to date. Engineers went full throttle with the new 0311 Gen7 irons to maximize distance and forgiveness, while retaining the soft feel PXG is known for. Two iron models — 0311 P and 0311 XP — were designed to fit a very wide range of golfers from single-digit handicaps to players who need and want more help. Also: Sugar Daddy III wedges are all new with fewer screws and more sole options to fit more swings and conditions. The original Sugar Daddy DNA is still there so expect a heavy dose of milling and grooves that are up to the legal limit for creating spin.


PXG 0311 Gen7 P & XP irons: What’s new, key technology
Filling an iron with a proprietary polymer is nothing new for PXG, but this new QuantumCOR material is all new. PXG developed QuantumCOR as a way to produce the fastest C.O.R. (coefficient of restitution) possible. This new material is used inside the clubbed to help support the ultra-thin face to produce the maximum C.O.R. allowed by the USGA in an iron. QuantumCOR not only helps to create massive ball speed but also creates a very soft feeling and sounding iron in line with what you would expect from PXG. These irons average about 1 mph more ball speed than the 0311 Gen6 irons.


Speaking of that iron face, a lot of companies claim to be going thinner and thinner, but PXG has the thinnest face in golf with its 0311 Gen7 irons. The face is made from very high-strength stainless steel called HT1770 which is almost twice as strong as traditional stainless. This strength allows PXG engineers to create a 0.050-inch face that will still be durable enough for the swing speeds of the strongest players.
PXG’s Power Channel milling on the back of the face carries over and helps the face flex for a higher launching iron. Screws have always been a big part of PXG clubs, but you will notice that there is only a single screw on the back of the new 0311 Gen7 irons. You can see a ring around the screw with “titanium” etched into it. This titanium insert is used to take about five grams of weight away from the center of the club and move it to the perimeter to boost MOI. This titanium insert works with the internal 20 grams of tungsten out in the toe to move the center of gravity to the center of the face and add forgiveness.
2024 PXG 0311 Gen7 Irons: Additional model details
PXG 0311 Gen7 P
The 0311 Gen7 P irons are built for mid-to-low handicaps who are looking for a combination of distance, forgiveness, and the ability to work the ball. Reduced offset, a thinner topline, and an overall smaller head give a confident look at address and should appeal to the target players. A thinner sole with a reduced trailing edge will offer the player great turf interaction. Lofts on the 0311 Gen7 P irons are more traditional with a 44-degree pitching wedge, 30-degree 7-iron, and 20.5-degree 4-iron. PXG will offer the 0311 Gen7 P irons in the traditional satin chrome finish alongside their Xtreme Dark DLC finish.

PXG 0311 Gen7 XP
If a player is looking for maximum distance and forgiveness, then the 0311 Gen7 XP iron is the tool for the job. Moving to the XP iron will give you a wider sole, more offset, and a larger club head with higher MOI. Even though the XP is built around helping golfers, you still get the same QuantomCOR polymer and tungsten weighting as its smaller sibling. The lofts are a little stronger with the XP as the pitching wedge is 41 degrees, 27-degree 7-iron, and the 4-iron is 18 degrees to get the most out of every shot. A wider sole will help with shots that are hit slightly fat. Like other PXG irons, the Xtreme Dark finish is available on these as well.

Pricing, specs, and availability
- Price: $230, $1,610 7-piece set
- Price (Xtreme Dark): $239.99, $1,680 7-piece set
- At retail: Now
PXG Sugar Daddy III wedges: What’s new, key technology
Sugar Daddy wedges have been known for their high performance and exceptional feel since the first version. PXG took everything it has learned and crammed it into the Sugar Daddy III wedges. This year we get a new S Grind sole option, the BP Grind welcomes a high-toe shape in the lob wedges, full-face grooves on the high-toe lob wedges, and traditional wedge grooves on the gap and sand wedges. PXG also went to a tighter groove pattern with wider grooves for the maximum spin out of any lie.
Twin pockets are milled out of the back of the wedge to move almost eight grams of weight for moving the CG location higher. A higher center of gravity will create more spin and give a player a flatter, more controlled trajectory. Like the Sugar Daddy wedges before, these are 3X forged and then milled to the final shape and grind to ensure the best feel and performance you can get.

Pricing, specs, and availability
- Price: $299.99
- Price (Xtreme Dark): $349.99
- At retail: Now

Equipment
Interesting clubs at top of bag – GolfWRXers discuss
In our forums, users are talking about top of bag setups that are non-traditional or thought-provoking in some way. Original poster @SuperSpurs106 inquired about other members who might use unorthodox set-ups to help with gapping issues or weak spots.
They wrote:
“I currently have a PING G430 driver, TM Qi35 3W and a TM Qi4D 7W. Driver and 7W are fine but can’t get on with my 3W and have always struggling with this club over the years. Thinking of adding a 2H which I know would look odd. Just wondering if anyone else had a weird set up at the top of their bag?”
Our members in the forum have offered up their thoughts and personal experiences with non-traditional top of bag set-ups, and their reasoning for thinking outside of the box to begin with. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- BowMain42: “Don’t worry about what “looks” odd. If the club does what you need it to do, it’s the right club.”
- scooterhd2: “I cant hit 3 woods either. Thats why I roll with a unicorn XL Hibore 2 wood. 400 cc head at 16 degrees of loft and its just a monster 3 wood off the tee. Off the deck, we are playing the f6 baffler. 5 wood at 41.75 inches and its easy to control.”
- phizzy30: “I had driver, 3 metal, 2/4 hybrid once upon a time as a higher ss player. 4 hybrid is gone and in place is a driving iron nowadays. I don’t think what you’re proposing is weird in anyway, however the yardage gap might be glaringly huge between driver and 2 hybrid. What is it about your 3 metal that has got you all messed up? You could always go 4 metal with shorter shaft and see if that works.”
Entire Thread: “Interesting clubs at top of bag”
If you aren’t a member, join us in the GolfWRX forums today!
Equipment
Members of the Mini Driver Club – GolfWRXers discuss
In our forums, one user has gone searching for fellow users of a mini driver. In a post, @TightFade asked for other mini driver users to chime in with their weapon of choice, the reason for employing a mini, and what club follows it in the bag.
@TightFade asked:
“What mini are you playing? What spot in the bag did it take over? What’s the next club after it? For me: Elyte mini 13.5. Replacing 3w. Next up club looks like it’ll be 5w.”
Our members in the forum have been sharing their own bag setups featuring the mini driver, and the various reasons they purchased one in the first place. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- RCGA: “Ping G430 Max 12* ‘Thriver.’ Next club is a 4w and 2i (I play a weird course).”
- JMB3: “R7 at 12.75 with Diamana BB 63s. 3w replacement. Next Club: Elyte Ti 5w at 17*.”
- ColdOkieGolf: “R7 15.5 turned down to 13.5 It replaces the 3w. I found it surprisingly easy to hit off the deck, and it’s very rare that I need or want to hit something beyond 250 from the fairway, so next club is my 7w.”
- ChaosTheory: “I’m sub-90 MPH with driver. But I’m able to hit DOD. I have been wanting something like the R7 15.5, so I just ordered one. I have a spot in the bag so nothing has to go. But I could see it replacing my trusty 4 wood, which I never use for approach shots. Just tee shots and lay ups. If I drop the 4 wood, I will turn my 7 wood down to ~20 degrees and will have good gaps. I recently tried a thriver build: 12 degree driver turned to 14, with a heavier 44 inch shaft and added head weight. I hit it great. Very accurate and not overly high, but the problem was that it sometimes went as far as a typical drive. And that’s not what I needed. So I will probably turn the 15.5 up to 16.5 or even 17.5. It’s all theoretical at this point. ?”
Entire Thread: “Members of the Mini Driver Club…Check In.”
If you aren’t a member, join us in the GolfWRX forums today!
Whats in the Bag
Chris Gotterup WITB 2026 (June)
- Chris Gotterup had >14 clubs in his bag when photographed prior to the Memorial Tournament.
Drivers: TaylorMade Qi4D (8 degrees), Ping G440 LST (9 degrees @8), Ping G440 LST (7.5 degrees)
Shafts: Project X HZRDUS Smoke Grey 6.5 TX 70 g, Project X HZRDUS T1100 Handcrafted 6.5 TX 70 g, Project X HZRDUS Smoke Grey 6.5 TX 70 g


Mini driver: TaylorMade BRNR (13.5 degrees)
Shaft: Project X HZRDUS Black TX 80 g

5-wood: TaylorMade Qi4D (18 degrees)
Shaft: Mitsubishi Chemical Diamana WB Wood Shaft 83 TX

7-wood: TaylorMade Qi4D (21 degrees)
Shaft: Mitsubishi Diamana WB Wood Shaft 83 TX

Irons: TaylorMade P770 (3), Bridgestone Tour B 220 MB (4-9)
Shafts: KBS C-Taper 130 X


Wedges: TaylorMade MG5 (46, 52, 56, 60)
Shafts: KBS C-Taper 130 X, True Temper Dynamic Gold Tour Issue X100

Putter: TaylorMade Spider X Tour
Grip: SuperStroke Zenergy Pistol 2.0

Grips: Golf Pride Z Grip Cord
Ball: Bridgestone Tour B X Mindset
Check out more in-hand photos of Chris Gotterup’s clubs here.
-
News3 days agoRussell Henley’s winning WITB: 2026 Charles Schwab Challenge
-
Whats in the Bag2 weeks agoAaron Rai’s winning WITB: 2026 PGA Championship
-
Tour Photo Galleries2 weeks agoPhotos from the 2026 CJ Cup Byron Nelson
-
Equipment14 hours agoDetails on Jason Day’s latest prototype Avoda iron setup
-
Equipment2 weeks agoCJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
-
News6 days agoCharles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
-
Equipment1 week agoDetails on J.J. Spaun’s surprise putter switch
-
Popular Photo Galleries1 week agoPhotos from the 2026 Charles Schwab Challenge

Pingback: Three Swing Challenge: Testing PXG Gen7 0311 P irons – GolfWRX
Sam
Aug 8, 2024 at 4:24 pm
They just keep getting uglier!
Odd that they started off with all the smaller weights as their signature look, but they have gotten away from that.
PXG continues to get more confusing on where they want to go as a company. They started off as ultra luxury, but now they discount their stuff 3-months after launch. They said they would only release new products when it was significantly better than what they have out, but how is it that they can continue to release stuff every year that’s that much better then what they already released?
They customers are getting mad because they can’t keep up, as the trade in value is almost nothing.
Wonder where PXG will be in a few years.
Chatsworth Osborne Jr.
Aug 7, 2024 at 7:28 pm
3X Forged!? A 3 hollow head with Flubber!