Equipment
Forum Thread of the Day: “Going back in time equipment-wise?”
Today’s Forum Thread of the Day comes from Jaygolf37 who asked WRXers on their thoughts on going back in time equipment-wise. Jaygolf37 has recently found success after putting his Ping i5 irons back in his bag, and our members share their thoughts and experiences of siding with older equipment.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- Aviador Naval: “I put a ~2005-2006 original Cleveland Ti Launcher fairway back in the bag for the umpteenth time. Smaller footprint by today’s standards. Only 15 deg club I’ve been able to hit reliably from turf. Currently playing a Mn-Bn Anser I bought in 1989. Like the lighter head weight. Just got some MP20 mid and short irons which are basically a redo of the TN-87s. Changes driven by a mix of functionality (fw), variety (putter), and irrational ho’ing (irons).”
- cgasucks: “All my gamers are old with my newest clubs made in the early 2010s. I feel that with a good swing fundamental, one can play with any club out there. I think older clubs are better feeling, obviously a lot cheaper, and can still keep up with the present-day clubs out there since golf tech has been stagnant for years.”
- scotty_2987: “Just put my 910 D2 back in play yesterday and had the best driving day I’ve had in a long time, and I was hitting it just as far as all the newer drivers.”
- MountainGoat: “Whenever I lose my swing, I go back to a set of Maltby CER701Us that I assembled in 2006. Those are the clubs I was using when I discovered my current swing technique, so those are the ones I inevitably return to when I need to re-discover it.”
Equipment
Interesting clubs at top of bag – GolfWRXers discuss
In our forums, users are talking about top of bag setups that are non-traditional or thought-provoking in some way. Original poster @SuperSpurs106 inquired about other members who might use unorthodox set-ups to help with gapping issues or weak spots.
They wrote:
“I currently have a PING G430 driver, TM Qi35 3W and a TM Qi4D 7W. Driver and 7W are fine but can’t get on with my 3W and have always struggling with this club over the years. Thinking of adding a 2H which I know would look odd. Just wondering if anyone else had a weird set up at the top of their bag?”
Our members in the forum have offered up their thoughts and personal experiences with non-traditional top of bag set-ups, and their reasoning for thinking outside of the box to begin with. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- BowMain42: “Don’t worry about what “looks” odd. If the club does what you need it to do, it’s the right club.”
- scooterhd2: “I cant hit 3 woods either. Thats why I roll with a unicorn XL Hibore 2 wood. 400 cc head at 16 degrees of loft and its just a monster 3 wood off the tee. Off the deck, we are playing the f6 baffler. 5 wood at 41.75 inches and its easy to control.”
- phizzy30: “I had driver, 3 metal, 2/4 hybrid once upon a time as a higher ss player. 4 hybrid is gone and in place is a driving iron nowadays. I don’t think what you’re proposing is weird in anyway, however the yardage gap might be glaringly huge between driver and 2 hybrid. What is it about your 3 metal that has got you all messed up? You could always go 4 metal with shorter shaft and see if that works.”
Entire Thread: “Interesting clubs at top of bag”
If you aren’t a member, join us in the GolfWRX forums today!
Equipment
Members of the Mini Driver Club – GolfWRXers discuss
In our forums, one user has gone searching for fellow users of a mini driver. In a post, @TightFade asked for other mini driver users to chime in with their weapon of choice, the reason for employing a mini, and what club follows it in the bag.
@TightFade asked:
“What mini are you playing? What spot in the bag did it take over? What’s the next club after it? For me: Elyte mini 13.5. Replacing 3w. Next up club looks like it’ll be 5w.”
Our members in the forum have been sharing their own bag setups featuring the mini driver, and the various reasons they purchased one in the first place. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- RCGA: “Ping G430 Max 12* ‘Thriver.’ Next club is a 4w and 2i (I play a weird course).”
- JMB3: “R7 at 12.75 with Diamana BB 63s. 3w replacement. Next Club: Elyte Ti 5w at 17*.”
- ColdOkieGolf: “R7 15.5 turned down to 13.5 It replaces the 3w. I found it surprisingly easy to hit off the deck, and it’s very rare that I need or want to hit something beyond 250 from the fairway, so next club is my 7w.”
- ChaosTheory: “I’m sub-90 MPH with driver. But I’m able to hit DOD. I have been wanting something like the R7 15.5, so I just ordered one. I have a spot in the bag so nothing has to go. But I could see it replacing my trusty 4 wood, which I never use for approach shots. Just tee shots and lay ups. If I drop the 4 wood, I will turn my 7 wood down to ~20 degrees and will have good gaps. I recently tried a thriver build: 12 degree driver turned to 14, with a heavier 44 inch shaft and added head weight. I hit it great. Very accurate and not overly high, but the problem was that it sometimes went as far as a typical drive. And that’s not what I needed. So I will probably turn the 15.5 up to 16.5 or even 17.5. It’s all theoretical at this point. ?”
Entire Thread: “Members of the Mini Driver Club…Check In.”
If you aren’t a member, join us in the GolfWRX forums today!
Whats in the Bag
Chris Gotterup WITB 2026 (June)
- Chris Gotterup had >14 clubs in his bag when photographed prior to the Memorial Tournament.
Drivers: TaylorMade Qi4D (8 degrees), Ping G440 LST (9 degrees @8), Ping G440 LST (7.5 degrees)
Shafts: Project X HZRDUS Smoke Grey 6.5 TX 70 g, Project X HZRDUS T1100 Handcrafted 6.5 TX 70 g, Project X HZRDUS Smoke Grey 6.5 TX 70 g


Mini driver: TaylorMade BRNR (13.5 degrees)
Shaft: Project X HZRDUS Black TX 80 g

5-wood: TaylorMade Qi4D (18 degrees)
Shaft: Mitsubishi Chemical Diamana WB Wood Shaft 83 TX

7-wood: TaylorMade Qi4D (21 degrees)
Shaft: Mitsubishi Diamana WB Wood Shaft 83 TX

Irons: TaylorMade P770 (3), Bridgestone Tour B 220 MB (4-9)
Shafts: KBS C-Taper 130 X


Wedges: TaylorMade MG5 (46, 52, 56, 60)
Shafts: KBS C-Taper 130 X, True Temper Dynamic Gold Tour Issue X100

Putter: TaylorMade Spider X Tour
Grip: SuperStroke Zenergy Pistol 2.0

Grips: Golf Pride Z Grip Cord
Ball: Bridgestone Tour B X Mindset
Check out more in-hand photos of Chris Gotterup’s clubs here.
-
News3 days agoRussell Henley’s winning WITB: 2026 Charles Schwab Challenge
-
Whats in the Bag2 weeks agoAaron Rai’s winning WITB: 2026 PGA Championship
-
Tour Photo Galleries2 weeks agoPhotos from the 2026 CJ Cup Byron Nelson
-
Equipment13 hours agoDetails on Jason Day’s latest prototype Avoda iron setup
-
Equipment2 weeks agoCJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
-
News6 days agoCharles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
-
Equipment1 week agoDetails on J.J. Spaun’s surprise putter switch
-
Popular Photo Galleries1 week agoPhotos from the 2026 Charles Schwab Challenge

Rich Douglas
Nov 28, 2019 at 12:40 pm
Sorry, but if any of my old stuff was better than today’s gear, I’d still be using it.
Better to think about WHY some of that old gear worked and see if you’re still leveraging those characteristics in your current clubs.
For example, I really had a good time when I switched to a Callaway Steelhead driver with a 43.5″ shaft. I’m thinking about going to a similar length the next time I get fit for a driver, although it will be with a modern head and shaft.
Gray
Nov 27, 2019 at 11:48 am
I play ~2007 Cleveland CG-7 Tour Irons. I work at a course where we have demo days multiple times per year. I’ve never found a set of irons with that combination of forgiveness, butter feeling, thin topline, and excellent sound. The closest thing I’ve been able to find were the Apex MBs, but they’re nowhere near as forgiving.