Equipment
Honma launches new XP-1 Series driver, fairway woods, and hybrids for 2020
For 2020, Honma Golf is launching the all-new XP-1 line of clubs comprised of an entire family holistically designed to help players maximize forgiveness and get the most out of their games with one set. The new Honma XP-1 drivers, fairway woods, and hybrids, all the way to irons, is a new direction for the premium Japanese company that brings together ultimate craftsmanship with performance.
The highlight of the XP-1 line from Honma is the fact that they were designed from top to bottom to work as a comprehensive set of tool to achieve maximum performance. The technology in the metal woods flows from the driver to the hybrids with a seamless transition that creates consistency for feel and looks for the player.
Honma XP-1 driver
Honma is known for its dedication to quality and craftsmanship, and every part of the XP-1 line was developed with the golfer in mind to both look appealing and perform to the highest standards. The XP-1 driver packs a lot of technology into a very classic looking club, and we’re here to take you under the hood—or in this case, the carbon fiber crown—to show you how it can help you hit better shots.
It starts with a tour-inspired look from address, designed to inspire confidence for any level of golfer. Underneath ther gloss black crown, there is a lot of technology to generate faster ball speeds around the entire face and help get you dialed into the right setting. Speaking to the crown, it’s made from ET-40 fiber, making it one the lightest in golf. This weight savings helps engineers relocate an additional 15g of mass around the head towards the heel for increased MOI and greater ability to help players close the club face more easily.
Flip the driver upside down, and we have a lot more going on with the sole than initially meets the eye. Honma is introducing a new double slot in the sole for increased ball speed across a much larger area of the face. What starts off smaller in the middle increases in width and depth as it reaches towards the heel and the toe of the club. These slots, along with improved MOI, keep ball speeds up and misses closer to the intended target. The last part of the equation: How these wider parts of the face, flex around the more narrow middle to also increase gear effect—think of it like one more way to help the bigger misses stay in play.
The last piece key piece of technology in the XP-1 driver head is exclusive to Honma—the adjustable hosel that changes face angle, lie, and loft, but never changes the orientation of the shaft. This gives the player or fitter the ability to truly dial in hosel settings without having to worry about the constantly changing of the grip orientation. This, according to Honma, also keeps the shaft spine in the ideal location for consistent performance.
Honma is the only manufacturer that produces its own shafts from start to finish in house, and the XP-1 is getting its own custom-designed and built shafts to complement the technology built into the heads. The Vizard stock shafts are engineered to produce a smooth feel that promotes faster clubhead speeds, yet also remain extremely stable. For the XP-1 driver, the matching Vizard shafts will come in weights of 43g, 53g, and 63g, and flexes from senior to stiff.
Honma XP-1 fairway woods
The XP-1 woods bring the same level of craftsmanship and technology as the drivers to a club designed for use both off the tee and off the fairway.
The Honma XP-1 3-wood uses the same weight-saving ET-40 crown to position a large amount of the club’s total mass low and on the sole for greatest possible launch and spin consistency. The 3-wood is the second-lightest club in most players bags by total weight and head mass, and unless you are carrying a second driver, it’s also the second-largest by volume. By using the carbon crown designers get everything they can from the other technologies including the double slot sole and thin fast face without having to sacrifice the overall design of not just the head but the entire club.
The XP-1 fairways also include a 5 7-woods, but with the smaller volume of the heads and the reduced crown size, using a carbon crown would actually increase the mass higher in the head, so they instead utilize an extremely thin high strength steel crown.
All of the fairway woods come with the same made-in-Sakata, Japan 43g, 53g, and 63g Vizard shaft options as the driver to help every player get the most of each club in the set. If might seem like a minor detail, but being able to design an entire club in house from head to grip is a big advantage for Honma versus other OEMs. This holistic approach to designing an entire club/set is a big benefit to the consumer looking to get the most out of each club in their bag and not feel like something may be working against them.
Honma XP-1 hybrid
With the Honma XP-1 hybrid, forgiveness and flow from the fairway woods is the number one consideration for these club. The flow includes a wood-like shape that keeps the club shallow and the center of gravity as low as possible for higher launch and approach shots that fly higher and land softer. Considering the target player for the XP-1 line, the wood-like shape is also very confidence-inspiring.
Honma continues the design philosophy of keeping the XP-1 both forgiving and fast by utilizing the double slot sole all the way into these hybrids that go from a 19-degree 3-iron replacement to a 25-degree 5-iron replacement.
Honma XP-1 specs & availability
The Honma XP-1 driver, fairway wood, and hybrids will be available starting in October.
- LIKE94
- LEGIT15
- WOW6
- LOL2
- IDHT2
- FLOP2
- OB2
- SHANK12
Whats in the Bag
Steve Stricker WITB 2024 (April)
- Steve Stricker WITB accurate as of the Zurich Classic. More photos from the event here.
Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X
3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX
Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X
Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5
Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore
Putter: Odyssey White Hot No. 2
Ball: Titleist Pro V1x
Grips: Golf Pride Tour Velvet Grip Rite
Check out more in-hand photos of Steve Stricker’s clubs here.
- LIKE5
- LEGIT0
- WOW0
- LOL0
- IDHT1
- FLOP0
- OB0
- SHANK0
Whats in the Bag
Alex Fitzpatrick WITB 2024 (April)
- Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X
Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX
Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)
Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X
Putter: Bettinardi SS16 Dass
Grips: Golf Pride MCC
Check out more in-hand photos of Alex Fitzpatrick’s clubs here.
- LIKE2
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss
In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
- driveandputtmachine: “Still playing a MIni 300. The head was only 208, so I ordered a heavier weight and play it at 3 wood length. I am playing a Ventus Red 70. I play 70 grams in my fairways. I use it mainly to hit draws off the tee. When I combine me, a driver, and trying to hit a draw it does not work out well most of the time. So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck. The 300 Mini is very good off the deck.”
- JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”
Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”
- LIKE3
- LEGIT1
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK4
-
19th Hole2 weeks ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole4 days ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole2 weeks ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole4 days ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole1 week ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole2 weeks ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole1 week ago
Brandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
Doug
Sep 22, 2019 at 10:42 am
What is USA release date
JP
Sep 19, 2019 at 7:41 pm
$599?!? Are they crazy? No thanks.
.
Drivers are getting out of control with prices. All of golf is getting out of control $$$!!!
15th Club
Sep 19, 2019 at 3:53 pm
That is what golf clubs should look like at address. I realize that TaylorMade and others are doing things with clubhead paint and graphics that make their clubs easier to recognize on tv in the hands of Tour players. But that doesn’t help me one bit. I’d rather play with a club that looks like a golf club; all other things being equal.
My current driver is a TaylorMade M2. It’s a good driver, of course. I’d prefer that it looked like this Honma.
So where — say in the area of Miles of Golf and Carl’s Golfland — can a guy demo these new Honmas?
Curt
Sep 19, 2019 at 12:45 pm
What’s the point of patents?
Paul
Sep 19, 2019 at 9:21 am
Wow, a slot in the sole. That’s genius, I don’t know why a company hasn’t done that before…
BoomDaBoom
Sep 19, 2019 at 7:48 am
Gotta admit that driver sole kinda looks dope as funk. Jusr a clean look. Wonder what it looks like from the top. Might actually look into these and eventually buy one… probably in a couple years when they are much cheeper.
Flow
Sep 19, 2019 at 2:25 am
The shafts obviously can’t compete with the Beres series but still better than anything else on the market in this price category. In my opinion thats excellent value for your money and there are not many clubs out there with shafts this light and soft that still show decent torque values.
Thomas A
Sep 19, 2019 at 9:23 am
“Obviously???”
Ugudor
Sep 24, 2019 at 3:46 pm
You pay 3k+ for a set of Beres, do you think the shaft is the same quality as in a 1k XP1 set?