Connect with us

Equipment

“Faster” 2020 Cleveland Launcher HB Turbo fairway woods revealed

Published

on

Cleveland Golf has introduced its new 2020 Cleveland Launcher HB turbo fairway woods, which feature a lighter hosel, improved crown, and deeper weighting.

The Launcher HB Turbo contains a Turbocharged Cup Face featuring a variable thickness pattern designed to deliver more speed across the entire face. According to the company, the Turbocharged Cup Face in the new Cleveland fairway wood stretches across the crown and sole, flexing at impact and reflecting that energy back into the ball for increased ball speeds at impact.

Cleveland Launcher HB Turbo fairway woods face

Cleveland Launcher HB Turbo fairway wood: face

The new additions from Cleveland Golf see a redesigned HiBore Crown featuring a prominent step for a lower center of gravity, while the Ultralight Hosel on the woods is lighter than its predecessors in a bid to remove “mass from a poor position.”

The weight savings in the Launcher HB Turbo fairway woods have produced a deep weighting sole pad with a center of gravity that’s 4.4mm deeper and 2.2mm lower than previous additions and aims to provide golfers with increased launch at impact, maximum distance off the tee, as well as added forgiveness.

Cleveland Launcher HB Turbo fairway woods crown

Speaking on the upcoming launch of the fairway woods, Brian Schielke, Marketing Director at Cleveland Golf, stated

“Reintroducing Cleveland Golf Woods and Irons two years ago has been very successful. However, the new Launcher HB Turbo woods represent a huge step up from the previous generation. They’re sleeker, faster, and more forgiving–exactly what all of us avid golfers are looking for off the tee.”

The Launcher HB Turbo also comes equipped with the new Miyazaki C. Kua shaft, which pulls weight from the length of the shaft and repositions it on the grip end. The function of this weight redistribution is to allow for extra mass in the clubhead and to offer increased momentum and more speed on each swing.

Cleveland Launcher HB Turbo fairway woods specs, availability

The Launcher HB Turbo Fairway Woods feature a 3-wood (15-degree) and 5-wood (18-degree) at a MAP of $229.99 each, and will be available to purchase from October 4.

Your Reaction?
  • 88
  • LEGIT9
  • WOW7
  • LOL2
  • IDHT0
  • FLOP2
  • OB0
  • SHANK8

Gianni is the Managing Editor at GolfWRX. He can be contacted at [email protected].

5 Comments

5 Comments

  1. Pat

    Sep 9, 2019 at 10:39 pm

    Amazing what a lick of paint can do. Looks pretty nice to me!

  2. JP

    Sep 9, 2019 at 9:36 pm

    They have no idea what a real turbo is and how it works!
    .
    And writing on the top of the crown? That is a cardinal sin! Stop with the gimmicky bling. We do t need fins on the crown, it’s not an F1 car!

  3. Jack nash

    Sep 9, 2019 at 4:48 pm

    Thought it was a Ping for a sec looking down on it,

  4. Robert

    Sep 9, 2019 at 2:26 pm

    Ok I can’t take it anymore, “the Turbocharged Cup Face” now, it will never end will it? Engines have turbo compressors, club faces don’t and never will. This article is yet another great example of the desperation that runs both at WRX and the OEMs at getting and or keeping cash flows running. As usual, all claims in this article ( I don’t even think this qualifies as an article it’s a disguised ad really )are unsubstantiated with any hard data that would give golfers a chance at finding out whether or not there is any difference in measurable performance between last year’s model and this latest “turbo charged” cup face nonsense. In no other industry do you see this amount of disregard by the sellers towards potential buyers capacity to think things through like intelligent human beings.

    • Bob

      Sep 10, 2019 at 10:27 pm

      Take a deep breath..inhale, exhale. Repeat..

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Steve Stricker WITB 2024 (April)

Published

on

Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X

3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX

Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X

Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5

Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore

Putter: Odyssey White Hot No. 2

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet Grip Rite

Check out more in-hand photos of Steve Stricker’s clubs here.

Your Reaction?
  • 26
  • LEGIT2
  • WOW0
  • LOL1
  • IDHT1
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

Whats in the Bag

Alex Fitzpatrick WITB 2024 (April)

Published

on

  • Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic. 

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X

Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX

Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)

Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X

Putter: Bettinardi SS16 Dass

Grips: Golf Pride MCC

Check out more in-hand photos of Alex Fitzpatrick’s clubs here.

Your Reaction?
  • 12
  • LEGIT0
  • WOW0
  • LOL1
  • IDHT1
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss

Published

on

In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
  • driveandputtmachine: “Still playing a MIni 300.  The head was only 208, so I ordered a heavier weight and play it at 3 wood length.  I am playing a Ventus Red 70.   I play 70 grams in my fairways.  I use it mainly to hit draws off the tee.  When I combine me, a driver, and trying to hit a draw it does not work out well most of the time.  So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck.  The 300 Mini is very good off the deck.”
  • JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”

Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”

Your Reaction?
  • 6
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT2
  • FLOP1
  • OB0
  • SHANK7

Continue Reading

WITB

Facebook

Trending