Connect with us

Equipment

Forum Thread of the Day: “Single length irons stunting development?”

Published

on

Today’s Forum Thread of the Day comes from rbark11 who has sparked an interesting debate over single length irons in our forums. Rbark11 has been playing single length irons for the past seven months, and he is concerned that he may have issues changing back to regular length irons. Our members give their take on the matter, as well as discussing single length irons in general.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • mcs4: “No, it will not. Both my father and I are currently playing Cobra One Length irons after decades of playing variable length irons. It took both of us maybe a few rounds to feel comfortable with the switch. This weekend I played a round with my old irons, and it was different but not a big deal. My opinion is that there are pros and cons with each approach, but I don’t think picking one will make any particular negative impact on your ability to later switch to the other.”
  • Quadra: “I’ve played both. Right now I am back to VL clubs ( Wishon 560 irons). Find VL gives me more shot-making options. With uneven lies, especially with the ball above or below foot level, the shot seems easier with a more upright or flatter lie, rather than trying to manipulate a shot from clubs with only a single length/lie. VL = more shot possibilities.”
  • Aucaveman: “I played Cobra ftbo for a year. Shot my best scores ever. Our club switched to Mizuno exclusively, so I had my first real fitting. I switched to the 919 forged and had to sell the Cobras to fund the mizunos. Really wished I hadn’t. I really liked the Cobras. The shafts in the Mizuno’s are better suited for me but had I put the same shafts in the Cobras; I’d prob been better off. At some point, I’ll prob do it and go back to one lengths. I was perusing eBay yesterday actually.”
  • Brandons68: “I think that the consistency you gain from SL irons is pretty great. I have not played them personally, but have talked to several people that have, and they really like the feel of the irons and the fact that they swing every iron the same because they are all the same length.”

Entire Thread: “Single length irons stunting development?”

Gianni is the Managing Editor at GolfWRX. He can be contacted at [email protected]

4 Comments

4 Comments

  1. THETaderSalad

    Aug 21, 2019 at 9:00 am

    I am using the Edel’s. I self fit which you’re not suppose to do with them, but I feel like I got close.

    It’s made my occasional round much more enjoyable. Same swing, ball placement, shot routine for each swing. Really took the guesswork out of it for me.

  2. Rich Douglas

    Aug 18, 2019 at 12:53 pm

    They’re not “snake oil.” Many players get great benefits from playing SL clubs.

    But I’m afraid the niche will die out without another pro or two using them. The ONLY reason Cobra is selling them is because they signed BDC. If this was such a hot topic, other club manufacturers would have jumped in by now.

    But it takes name-brand professionals to sell clubs at the big box golf stores, and that’s where the money is.

    It doesn’t take more money to manufacture single-length clubs. But it does take EXTRA money, and companies have to be relatively sure they can recoup their costs. I don’t know if Cobra is making money on their SL line–they might be happy with the brand recognition BDC brings them. But unless other rising pros arrive to the tour using SL clubs–and then signing with other companies–this will die with Cobra and BDC.

    As far as the physics go, SL clubs are not limiting players. They still have those unconscious adjustments to their other clubs–both longer (hybrids and woods) and shorter (sand and/or lob wedges). SL clubs don’t eliminate that.

  3. Rich Douglas

    Aug 18, 2019 at 2:19 am

    Or not.

    I’ve played them for almost 3 years now. (Wishon Sterling built at 36.5″, 4I – SW). A nearly new set of Pings sat untouched in my closet for the first two years. Never considered hitting them again after switching to the Sterlings. They took a few rounds to get used to: the low-lofted irons seemed terribly short and the wedges were awkward. But all of that disappeared quickly.

    I’m never switching back.

  4. A. Commoner

    Aug 16, 2019 at 9:35 am

    Snake oil from the start.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Interesting clubs at top of bag – GolfWRXers discuss

Published

on

In our forums, users are talking about top of bag setups that are non-traditional or thought-provoking in some way. Original poster @SuperSpurs106 inquired about other members who might use unorthodox set-ups to help with gapping issues or weak spots.

They wrote:

“I currently have a PING G430 driver, TM Qi35 3W and a TM Qi4D 7W. Driver and 7W are fine but can’t get on with my 3W and have always struggling with this club over the years. Thinking of adding a 2H which I know would look odd. Just wondering if anyone else had a weird set up at the top of their bag?”

Our members in the forum have offered up their thoughts and personal experiences with non-traditional top of bag set-ups, and their reasoning for thinking outside of the box to begin with. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • BowMain42: “Don’t worry about what “looks” odd. If the club does what you need it to do, it’s the right club.”
  • scooterhd2: “I cant hit 3 woods either. Thats why I roll with a unicorn XL Hibore 2 wood. 400 cc head at 16 degrees of loft and its just a monster 3 wood off the tee. Off the deck, we are playing the f6 baffler. 5 wood at 41.75 inches and its easy to control.”
  • phizzy30: “I had driver, 3 metal, 2/4 hybrid once upon a time as a higher ss player. 4 hybrid is gone and in place is a driving iron nowadays. I don’t think what you’re proposing is weird in anyway, however the yardage gap might be glaringly huge between driver and 2 hybrid. What is it about your 3 metal that has got you all messed up? You could always go 4 metal with shorter shaft and see if that works.”

Entire Thread: “Interesting clubs at top of bag”

If you aren’t a member, join us in the GolfWRX forums today!

Continue Reading

Equipment

Members of the Mini Driver Club – GolfWRXers discuss

Published

on

In our forums, one user has gone searching for fellow users of a mini driver. In a post, @TightFade asked for other mini driver users to chime in with their weapon of choice, the reason for employing a mini, and what club follows it in the bag.

@TightFade asked:

“What mini are you playing? What spot in the bag did it take over? What’s the next club after it? For me: Elyte mini 13.5. Replacing 3w. Next up club looks like it’ll be 5w.”

Our members in the forum have been sharing their own bag setups featuring the mini driver, and the various reasons they purchased one in the first place. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • RCGA: “Ping G430 Max 12* ‘Thriver.’ Next club is a 4w and 2i (I play a weird course).”
  • JMB3: “R7 at 12.75 with Diamana BB 63s. 3w replacement. Next Club: Elyte Ti 5w at 17*.”
  • ColdOkieGolf: “R7 15.5 turned down to 13.5 It replaces the 3w. I found it surprisingly easy to hit off the deck, and it’s very rare that I need or want to hit something beyond 250 from the fairway, so next club is my 7w.”
  • ChaosTheory: “I’m sub-90 MPH with driver. But I’m able to hit DOD. I have been wanting something like the R7 15.5, so I just ordered one. I have a spot in the bag so nothing has to go. But I could see it replacing my trusty 4 wood, which I never use for approach shots. Just tee shots and lay ups. If I drop the 4 wood, I will turn my 7 wood down to ~20 degrees and will have good gaps. I recently tried a thriver build: 12 degree driver turned to 14, with a heavier 44 inch shaft and added head weight. I hit it great. Very accurate and not overly high, but the problem was that it sometimes went as far as a typical drive. And that’s not what I needed. So I will probably turn the 15.5 up to 16.5 or even 17.5. It’s all theoretical at this point. ?”

Entire Thread: “Members of the Mini Driver Club…Check In.”

If you aren’t a member, join us in the GolfWRX forums today!

Continue Reading

Whats in the Bag

Chris Gotterup WITB 2026 (June)

Published

on

  • Chris Gotterup had >14 clubs in his bag when photographed prior to the Memorial Tournament.

Drivers: TaylorMade Qi4D (8 degrees), Ping G440 LST (9 degrees @8), Ping G440 LST (7.5 degrees)
Shafts: Project X HZRDUS Smoke Grey 6.5 TX 70 g, Project X HZRDUS T1100 Handcrafted 6.5 TX 70 g, Project X HZRDUS Smoke Grey 6.5 TX 70 g

Mini driver: TaylorMade BRNR (13.5 degrees)
Shaft: Project X HZRDUS Black TX 80 g

5-wood: TaylorMade Qi4D (18 degrees)
Shaft: Mitsubishi Chemical Diamana WB Wood Shaft 83 TX

7-wood: TaylorMade Qi4D (21 degrees)
Shaft: Mitsubishi Diamana WB Wood Shaft 83 TX

Irons: TaylorMade P770 (3), Bridgestone Tour B 220 MB (4-9)
Shafts: KBS C-Taper 130 X

Wedges: TaylorMade MG5 (46, 52, 56, 60)
Shafts: KBS C-Taper 130 X, True Temper Dynamic Gold Tour Issue X100

Putter: TaylorMade Spider X Tour
Grip: SuperStroke Zenergy Pistol 2.0

Grips: Golf Pride Z Grip Cord

Ball: Bridgestone Tour B X Mindset

Check out more in-hand photos of Chris Gotterup’s clubs here.

Continue Reading

Announcement

Our Privacy Policy and Terms of Use have been updated as of January 29th, 2026. Please review the updated policies here Privacy Policy | Terms of Use. By continuing to use our site after January 29th, 2026, you agree to the changes.

WITB

Facebook

Trending