Connect with us

Equipment

Ping’s new Sigma 2 putters are length-adjustable, and one of them “fetches” the ball from the hole

Published

on

We recently spotted photos of Ping’s new Sigma2 putter line in our GolfWRX forums, but what we didn’t know at the time was that there is an adjustable-length system built into their Pistol grips.

The USGA conforming, length-adjustable feature allows golfers to change lengths between 32 and 36 inches in approximately 0.25-inch increments with a turn of the small Ping wrench that fits into the butt end of the grips.

“The adjustable shaft is just a really cool technology,” said John K. Solheim, Ping President. “Our engineers took a very complex technical challenge and simplified it for the benefit of golfers. It allows you to experiment with various lengths and ultimately self-fit yourself. You’re no longer limited to a specific length measurement. You simply adjust it until you’re comfortable, ideally with your eyes directly over the ball. We call it ‘invisible’ technology but once you customize it to your length, the results will be very clear on your scorecard.”

Also, we’ve since learned that the Sigma2 Fetch putter head fits into a standard size golf hole, and the design allows golfers to simply place the bottom of the putter head into the hole to pick the golf ball out without bending over.

Each of the 9 new head models in the Sigma2 line have a new face technology as well, made to be softer and more responsive than the Sigma G putter faces. The “dual-durometer” face inserts, which are made of PEBAX material, have a softer outer layer, and a firmer inner layer, designed for greater player feedback, according to Ping.

Additionally, Ping’s familiar TR face design pattern alters in depth across the face to speed up mishits — the goal being to have greater speed consistency regardless of where the golfer strikes the ball on the face.

The Sigma2 putters, which are now available for pre-order at Ping golf shops around the world, are offered with either the PP60 (midsize and lightweight), the PP61 (inspired by the PP58), or the PP62 (larger, more rounded shape) grip, which are each equipped with the length-adjustable system.

Read below for full specs of each putter, as per Ping’s press release.

See more photos and discussion about the Sigma2 putters here.

Ping Sigma2 Anser

Putter Type: Blade
Finish: Platinum or Stealth
Head Weight: 350 grams
Stroke Type: Slight Arc
Lie Angle: 20 degrees (+/- 4)
Loft: 3 degrees (+/- 2)
Price: $215

Ping Sigma2 ZB 2

Putter Type: Blade
Finish: Platinum
Head Weight: 350 grams
Stroke Type: Strong Arc
Lie Angle: 20 degrees (+/- 4)
Loft: 3 degrees (+/-2)
Price: $215

Ping Sigma2 Kushin C

Putter Type: Mid-Mallet
Finish: Platinum
Head Weight: 360 grams
Stroke Type: Straight
Lie Angle: 20 degrees (+/- 4)
Loft: 3 degrees (+/-2)
Price: $215

Ping Sigma2 Arna

Putter Type: Mid-Mallet
Finish: Stealth
Head Weight: 360 grams
Stroke Type: Slight Arc
Lie Angle: 20 degrees (+/-4)
Loft: 3 degrees (+/-2)
Price: $215

Ping Sigma2 Tyne

Putter Type: Mallet
Finish: Stealth
Head Weight: 365 grams
Stroke Types: Straight, Slight Arc
Lie Angle: 20 degrees (+/-2)
Loft: 3 degrees (+/-2)
Price: $235

Ping Sigma2 Tyne 4

Putter Type: Mallet
Finish: Platinum
Head Weight: 370 grams
Stroke Type: Strong Arc
Lie Angle: 20 degrees (+/-4)
Loft: 3 degrees (+/-2)
Price: $235

Ping Sigma2 Wolverine H

Putter Type: Mallet
Finish: Stealth
Head Weight: 370 grams
Stroke Type: Slight Arc
Lie Angle: 20 degrees (+/- 4)
Loft: 3 degrees (+/-2)
Price: $235

Ping Sigma2 Valor

Putter Type: Mallet
Finish: Stealth
Head Weight: 365 grams
Stroke Types: Straight, Slight Arc
Lie Angle: 20 degrees (+/-2)
Loft: 3 degrees (+/-2)
Price: $235

Ping Sigma2 Fetch

Putter Type: Mallet
Finish: Platinum
Head Weight: 365 grams
Stroke Type: Straight
Lie Angle: 20 degrees (+/-2)
Loft: 3 degrees (+/-2)
Price: $235

See what GolfWRX Members are saying about the Ping Sigma2 putters.

Your Reaction?
  • 239
  • LEGIT26
  • WOW13
  • LOL19
  • IDHT10
  • FLOP8
  • OB7
  • SHANK87

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

37 Comments

37 Comments

  1. Simms

    Nov 25, 2018 at 2:49 pm

    Lets hope all the “Athletic” players that are going to use the putter to take the ball out of the cup spend some time on the practice tee doing it….no doubt if you do not have the ability to bend over and take the ball out you more then likely will not be able to pull the putter out clean without lifting up a portion of the lip….that next putt from your buddy lips out on a two foot straight putt will be the sign.

  2. Tom

    Nov 4, 2018 at 5:10 pm

    Cheeseball!

  3. Tom

    Nov 4, 2018 at 5:09 pm

    Colors are ugly, unless you are a Carolina Panthers’ fan

  4. Carp

    Oct 31, 2018 at 2:09 pm

    Love the innovation.
    I can pick up my own ball though 🙂

  5. Talljohn

    Oct 16, 2018 at 4:50 pm

    Sorry, but Fetch is an absolute disaster to every player following behind that person who is shoving their putter into the hole to retrieve their ball and damaging the cup. NO, NO, NO.

    • David

      Nov 8, 2018 at 7:40 pm

      They risk with Fetch is damaging the lip on the way in and out of the cup.

      Have a feeling you would really need need to have the Yips(drunk) to cause damage the cup. The same people that don’t fix their divot it will be an issue but not the majority. I applaud the design!

  6. Karl

    Oct 15, 2018 at 7:58 pm

    I wish Ping would come out with an Anser 2 model that’s almost identical to the original stainless, clean sole, smooth face, clean sole just with a 340g option. I love my old ping, except for all the lead tape on the bottom! Basically a TR 1966 without face grooves!

    • Mat

      Oct 15, 2018 at 10:38 pm

      They do. It’s the weight-option in the Vault 2 line.

  7. Mat

    Oct 15, 2018 at 4:38 pm

    A few things…

    Fetch is going to be a big win with those that their most difficult manoeuvre on the course is getting the ball out of the cup.

    The length adjuster is going to be the way ALL putters work soon, in the same way as drivers are impossible to find without an adjustable sleeve. Why? It costs a lot of money to make different lengths… specifically, in “dead inventory”. It’s like making shoes; you always find the wrong size. No more of that; this is *every* size.

    And Tynes >>> Spiders

    • Mat

      Oct 15, 2018 at 4:42 pm

      Two more…

      I hate the teal.

      70º upright is a change from their prior 69º standard.

  8. James

    Oct 15, 2018 at 4:38 pm

    Yes, but will it fetch a ball from a water hazard, too?!

  9. George

    Oct 15, 2018 at 4:34 pm

    So, you can get a putter that is fitted to your preferred length? Wow, I didn‘t know that was possible until now! Except maybe my 29.25“ putter that was cut to that specific length and weight adjusted.

  10. Christopher

    Oct 15, 2018 at 4:20 pm

    I’m not sure how useful the Fetch will be, I’d imagine it’s designed with the gimmick of picking the ball up from the ground and not the hole. The ball doesn’t always rest in the middle of the hole and the hole for the flag is sometimes concave (so you’d never get the putter low enough to get the ball above the sole of the putter).

    I can’t imagine the damage it would cause, hopefully when putting with the flagstick in is legal it won’t be a huge issue, as players would have to remove the flag and then dip their putters in! After a couple of wrecked holes I can see clubs initiating a local rule banning the practice.

    • JM

      Oct 15, 2018 at 10:43 pm

      Absolutely agree. We have a hard enough time getting people to fix ball marks, let alone fixing the damage this will do to the cups. Honestly, I’m surprised Ping would do something like this.

  11. Charlie

    Oct 15, 2018 at 3:21 pm

    Is the 20 degree lie angle for the putters correct? That seems a bit off…

    • Christopher Williams

      Oct 15, 2018 at 4:07 pm

      They measure the other way 0° is at 12 o’clock. so a 70° lie angle becomes a 20°.

  12. golfraven

    Oct 15, 2018 at 2:34 pm

    Saddly this line will be all forgotten next year and Ping will try to come up with something new. Too many models, too many gimmicks

  13. Liberty Apples

    Oct 15, 2018 at 1:30 pm

    A little surprised at Ping. You don’t mess with cups. Encouraging people to go fishing for their golf ball – not a good idea. Bend over and get some exercise, for goodness’ sake.

    • Jim

      Oct 15, 2018 at 3:09 pm

      Yup, chuckleheads will be tearing them up 🙁

  14. Brian Thomas

    Oct 15, 2018 at 12:49 pm

    The new Ping sigma putter….is nothing new.
    A friend of mine designed the “Ring” putter some 40 years ago which allowed players to get the ball out of the hole without bending.

  15. Sunny

    Oct 15, 2018 at 12:16 pm

    Stop trying to make fetch happen. It’s not gonna happen

  16. NormW

    Oct 15, 2018 at 11:51 am

    They look good, but not all players like fae inserts. And why do you always show only the bottom of the club? It’s the top that we see when putting.

  17. Cooper Wright

    Oct 15, 2018 at 11:40 am

    The Fetch will increase the demise of every clean cut hole out there.

  18. Jerry G

    Oct 15, 2018 at 11:23 am

    Liking what I see and read, but need to see more

  19. CaoNiMa

    Oct 15, 2018 at 11:16 am

    Who’s going to hunt down those players who are surreptitiously changing the length of their putter during the round? Better keep and eye on the caddy too!
    Ban them!

  20. JP

    Oct 15, 2018 at 10:28 am

    HOLD ON!!!

    Wilson’s president said specifically on driver vs. driver 2, that invisible technology will simply NOT SELL…

  21. dat

    Oct 15, 2018 at 9:58 am

    The fetch is gonna be a really hot seller with the senior market. Believe it!

    • Ron

      Oct 15, 2018 at 11:37 am

      Gonna lead to a lot of dinged up cup edges, I think.

      • Michael

        Oct 15, 2018 at 11:48 am

        Agree

        • ~j~

          Oct 15, 2018 at 12:08 pm

          Concur. Terrible idea… unless we can make it lime the game Operation somehow…

      • Jose Pinatas

        Oct 16, 2018 at 10:51 am

        I can’t agree more. This is going to be an issue as to where the cups are going to be damaged, and cause the edges to lose sharpness, prompting more lip outs. Apparently Ping wants us to miss putts…. DO NOT BUY….

  22. George

    Oct 15, 2018 at 9:26 am

    why take pics of the bottom of the clubs and not the topline???

  23. Travis

    Oct 15, 2018 at 9:17 am

    This is an… interesting direction…

    • allan

      Oct 15, 2018 at 11:55 pm

      Ping Smigma2 putters…. sniff sniff sniff….

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Welcome to the family: TaylorMade launches PUDI and PDHY utility irons

Published

on

TaylorMade is continuing its UDI/DHY series with the successor to the Stealth UDI and DHY utility irons: PUDI and PDHY (which the company styles as P·UDI and P·DHY). TaylorMade is folding the designs in with its P Series of irons.

TaylorMade outlined the process of developing its new utilities this way. The company started with the data on utility iron usage. Not surprisingly, better players — i.e. those who generate more clubhead speed and strike the ball more precisely — were found to gravitate toward the UDI model. DHY usage, however, covered a wider swath than the company might have expected with six-to-18 handicappers found to be bagging the club.

TaylorMade also found that the majority of golfers playing UDI or DHY utilities were playing P Series irons at the top of their iron configurations.

Can you see where this is going?

Matt Bovee, Director of Product Creation, Iron and Wedge at TaylorMade: “As we look to the future, beyond the tech and the design language, we are excited about repositioning our utility irons into the P·Series family. P·UDI is an easy pair for players that currently play P·Series product and P·DHY is an extremely forgiving option for players of all skill levels. It is a natural fit to give these players the performance in this category that they are looking for.”

TaylorMade PUDI

TaylorMade PUDI technology cutaway (via TaylorMade)

Crafted with tour player input, TaylorMade sought to develop a confidence-inspiring utility iron that blends with the rest of the P Series irons. Also of note: Interestingly, the PUDI has a more compact head than the P790.

In comparison to past UDI products, the PUDI has a more traditional iron shape, slimmer toplines, and less offset with a little of the backbar visible at address.

TaylorMade PDHY

TaylorMade PDHY tech cutaway (via TaylorMade).

Larger in profile than the PUDI, the PDHY seeks to position center of gravity (CG) lower in the club for ease of launch. The toe height is larger and the profile is larger at address — roughly five millimeters longer than PUDI — the sole of the club is wider for improved forgiveness.

Club Junkie’s take

Golfers who feel like they are missing something at the top of the bag could find the PUDI or PDHY a great option. The look of the PUDI should fit the most discerning eye with a more compact look, less offset, and a thinner topline. If you want a little more confidence looking down the P-DHY will be slightly larger while still being a good-looking utility iron.

For being small packages both models pack a pretty good punch with fast ball speeds, even off-center. The feel is soft and you get a solid feel of the ball compressing off the face when you strike it well. Your ears are greeted with a nice heavy thud as the ball and club come together. The PDHY will launch a little higher for players who need it while the PUDI offers a more penetrating ball flight. Both utility irons could be the cure for an open spot in the top end of the bag.

PUDI, PDHY, or Rescue?

TaylorMade offers the following notes to assist golfers in filling out their bags:

  • PUDI has mid-CG right behind the center face to create a more penetrating mid-to-low ball flight
  • PDHY has a lower center of gravity to produce an easier-to-launch mid-to-high ball flight.
  • Both PUDI and PDHY are lower-flying than the company’s hybrid/Rescue clubs.
  • PUDI is more forgiving than P790.
  • PDHY is the most forgiving iron in the entire TaylorMade iron family

Pricing, specs, and availability

Price: $249.99

At retail: Now

Stock shafts: UST Mamiya’s Recoil DART (105 X, 90 S and 75 R – only in PDHY)

Stock grip: Golf Pride’s ZGrip (black/grey)

PUDI lofts: 2-17°, 3-20°, 4-22° in both left and right-handed

PDHY lofts: 2-18°, 3-20° and 4-22° in both left and right-handed

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (5/3/24): Scotty Cameron Champions Choice 2.5+ putter

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a Scotty Cameron Champions Choice 2.5+ putter

From the seller: (@wwcl): “Has been gamed as pics show. 33.5 includes original h/c and grip. $575 includes shipping and PP fees.”

To check out the full listing in our BST forum, head through the link: Scotty Cameron Champions Choice 2.5+ putter

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Richy Werenski WITB 2024 (May)

Published

on

  • Richy Werenski what’s in the bag accurate as of the CJ Cup Houston Open.

Driver: Titleist TSR3 (10 degrees, D1 SureFit setting)
Shaft: Mitsubishi Diamana PD 60 TX

3-wood: Titleist TSR2 (15 degrees, A1 SureFit setting)
Shaft: Fujikura Ventus Red 8 X

Hybrid: Titleist TSR3 (19 degrees, D1 SureFit setting)
Shaft: Mitsubishi Tensei CK Pro White Hybrid 90 TX

Irons: Titleist T100 (4-9)
Shafts: Nippon N.S. Pro Modus3 Tour 105 S

Wedges: Titleist Vokey Design SM9 (46-10F, 50-12F), Titleist Vokey Design WedgeWorks Proto (54-M, 58-L @60)
Shafts: True Temper Dynamic Gold Tour Issue X100 Onyx (46-50), True Temper Dynamic Gold Tour Issue S400 Onyx (54-60)

Putter: Scotty Cameron prototype

Ball: Titleist Pro V1x Left Dash

Grips: Golf Pride ZGrip Cord

Check out more in-hand photos of Richy Werenski’s clubs in the forums.

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending