Equipment
Mizuno’s 2018 CLK hybrids
Mizuno has officially launched its new CLK hybrids, which bring back familiar nomenclature from its 2010 MP-CLK hybrids — “Cleek” is a historic name for a driving iron, and that reference was confirmed by Mizuno.
As we recently saw on the PGA Tour, the CLK hybrids have “Wave Technology” in the sole behind the face by way of a speed slot that uses geometry to develop more energy transfer at impact. While this speed slot has a similar look to the JPX-900 hybrids they replace, the CLK hybrids have an initial wave with “larger amplitude” to produce more ball speed than the older model, according to Mizuno.
Like the JPX-900 hybrids, the CLK hybrids are made with 1770 maraging steel faces that use the strong material to make its faces thinner. The new hybrids, however, are built to move the center of gravity (CG) lower and closer to the face. This shift in CG location will help encourage a higher launch and lower spin for golfers, according to Mizuno.
Four different loft options are available, but each of the hybrids has an eight-way adjustable hosel to help golfers dial in the loft and lie angle they prefer.
Mizuno’s new CLK hybrids, which will integrate into the company’s Performance Fitting Program to help golfers customize their full-bag setups, will come stock with Fujikura Speeder Evolution shafts and Golf Pride M31 360 grips. They will sell for $249 starting on September 15.
Specs
Discussion: See what GolfWRX Members are saying about the CLK hybrids in our forums
- LIKE123
- LEGIT13
- WOW3
- LOL1
- IDHT1
- FLOP3
- OB2
- SHANK3
Whats in the Bag
Steve Stricker WITB 2024 (April)
- Steve Stricker WITB accurate as of the Zurich Classic. More photos from the event here.
Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X
3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX
Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X
Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5
Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore
Putter: Odyssey White Hot No. 2
Ball: Titleist Pro V1x
Grips: Golf Pride Tour Velvet Grip Rite
Check out more in-hand photos of Steve Stricker’s clubs here.
- LIKE24
- LEGIT2
- WOW0
- LOL0
- IDHT1
- FLOP0
- OB0
- SHANK1
Whats in the Bag
Alex Fitzpatrick WITB 2024 (April)
- Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X
Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX
Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)
Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X
Putter: Bettinardi SS16 Dass
Grips: Golf Pride MCC
Check out more in-hand photos of Alex Fitzpatrick’s clubs here.
- LIKE11
- LEGIT0
- WOW0
- LOL1
- IDHT1
- FLOP0
- OB0
- SHANK0
Equipment
What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss
In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
- driveandputtmachine: “Still playing a MIni 300. The head was only 208, so I ordered a heavier weight and play it at 3 wood length. I am playing a Ventus Red 70. I play 70 grams in my fairways. I use it mainly to hit draws off the tee. When I combine me, a driver, and trying to hit a draw it does not work out well most of the time. So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck. The 300 Mini is very good off the deck.”
- JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”
Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”
- LIKE5
- LEGIT1
- WOW0
- LOL0
- IDHT2
- FLOP0
- OB0
- SHANK5
-
19th Hole3 weeks ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole6 days ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole3 weeks ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole6 days ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole2 weeks ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole2 weeks ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole2 weeks ago
Brandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
MD2
Feb 20, 2018 at 5:39 pm
Probably the best hybrid i’ve hit. Solid weight to get through the rough, and the simulator had it going a very consistent distance.
John Krug
Aug 30, 2017 at 10:08 am
Why is the shaft on the 2 hybrid so long?
Tom Miller
Aug 17, 2017 at 2:02 am
I have seen several place that have said the 900s hybrids are being discontinued. So these are replacements.