Equipment
Justin Thomas inspires Scotty Cameron’s new Futura 5.5M putter
In July 2016, Justin Thomas visited Scotty Cameron’s Putter Studio looking for a new flatstick. He wanted a compact mallet putter that would work for his arcing putting stroke, which required a custom solution from the Scotty Cameron team.
“We welded a flare neck to a Futura X5 Tour putter and sent him on his way,” Scotty Cameron said. He went on to win three events, reporting back that some of his buddies wanted a putter like his. The wheels started turning from there.”
The “turning wheels” inside Cameron’s head led him to create an all-new putter inspired by Thomas’ request, the Futura 5.5M. The new putter is about 10 percent smaller than the Futura 7M putter that it resembles. Unlike the 7M, however, it has what’s known as toe hang, or “toe flow,” a design that tends to work well for golfers with arcing putting strokes.
“To achieve [toe flow], I created a leaned over, stainless steel half-neck spud off the topline that accepts a single bend shaft,” Scotty Cameron said. “This is an elegant way to give the player a full shaft of offset and also offer a clean view of the entire leading edge of the topline. The proportion is right. The weight is right. And now we have a mallet with more toe flow for players who like that arcing feel in their stroke, but want more forgiveness.”
Like the rest of the Futura putter line, the Futura 5.5M ($379) has a multi-material construction of 6061 aircraft aluminum and 303 stainless steel. Its wrap-around face sole design pushes weight to the perimeter of the putter head for added forgiveness. It’s available in stores August 25 in North America and September 25 worldwide.
- LIKE91
- LEGIT15
- WOW9
- LOL7
- IDHT3
- FLOP11
- OB5
- SHANK104
Whats in the Bag
Steve Stricker WITB 2024 (April)
- Steve Stricker WITB accurate as of the Zurich Classic. More photos from the event here.
Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X
3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX
Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X
Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5
Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore
Putter: Odyssey White Hot No. 2
Ball: Titleist Pro V1x
Grips: Golf Pride Tour Velvet Grip Rite
Check out more in-hand photos of Steve Stricker’s clubs here.
- LIKE12
- LEGIT2
- WOW0
- LOL0
- IDHT1
- FLOP0
- OB0
- SHANK0
Whats in the Bag
Alex Fitzpatrick WITB 2024 (April)
- Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X
Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX
Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)
Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X
Putter: Bettinardi SS16 Dass
Grips: Golf Pride MCC
Check out more in-hand photos of Alex Fitzpatrick’s clubs here.
- LIKE5
- LEGIT0
- WOW0
- LOL0
- IDHT1
- FLOP0
- OB0
- SHANK0
Equipment
What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss
In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
- driveandputtmachine: “Still playing a MIni 300. The head was only 208, so I ordered a heavier weight and play it at 3 wood length. I am playing a Ventus Red 70. I play 70 grams in my fairways. I use it mainly to hit draws off the tee. When I combine me, a driver, and trying to hit a draw it does not work out well most of the time. So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck. The 300 Mini is very good off the deck.”
- JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”
Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”
- LIKE4
- LEGIT1
- WOW0
- LOL0
- IDHT1
- FLOP0
- OB0
- SHANK4
-
19th Hole2 weeks ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole5 days ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole3 weeks ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole5 days ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole2 weeks ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole2 weeks ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole1 week ago
Brandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
Geoff
Aug 2, 2017 at 12:19 pm
Another ‘Inspired By’ that isn’t like the model it’s inspired by. Another joke from Cameron.
Will
Aug 2, 2017 at 9:03 am
This is not inspired by justin Thomas any more than it was inspired by anyone else who uses a smaller mallet. They know we want a flow neck version. Not sure why they won’t make one. Im tired of waiting though. I’m getting the new odyssey 7 with a flow neck when they are available.
UnclePhil
Aug 1, 2017 at 3:20 pm
Sigh!
BusterG
Aug 1, 2017 at 2:29 pm
Available Aug 25 and I will be at my golf store at opening time to grab one of these booyah beauties
JB
Aug 1, 2017 at 12:38 pm
JT’s looks way better. This is a cop out.
AndyUK
Aug 1, 2017 at 10:54 am
Hmmm…that isn’t a flow neck last time I checked. Looks like he’s gone down the cheap route?
Massive FAIL!
David
Aug 1, 2017 at 10:06 am
Why wont they make JT’s putter or the one Jordan used for one week!? Terrible terrible terrible
Rich
Aug 21, 2017 at 7:20 pm
Because if they did, there wouldn’t be the “Tour only” putters that he can sell for thousands, just cause it’s got a certain stamp on it. I don’t mind Scotty Cameron putters but bloody hell they take people for a ride with all the bull that goes along with it.
Harry Doyle
Aug 1, 2017 at 9:50 am
Swing and a miss
DB
Aug 1, 2017 at 9:44 am
This is pretty nice, look forward to trying it. But I prefer the look of the straight shaft and flow-neck.
JD
Aug 1, 2017 at 9:07 am
When you go on a blind date and she looks nothing like her profile picture.
Jerry
Aug 1, 2017 at 8:55 am
I like Justin Thomas’ putter hosel.
LeftyRizer
Aug 1, 2017 at 12:32 pm
I agree 100%. Every other manufacturer is putting out a straight shaft flow-neck. That’s what players want. This is just a cheap knock-off….well, at $379 cheap may not be the right word.