Equipment
TaylorMade OS and OS CB putters
The OS in TaylorMade’s new OS and OS CB putters stands for “oversize.” With its new putter line, the company took two of its most popular blade and mallet putters — the Daytona and Monte Carlo — and increased their size, which increased their forgiveness as well as the size of their alignment aids.
Clay Long, TaylorMade’s Director of Product Creation for Irons and Wedges, has been designing putters for a long time, most famously the MacGregor Response ZT 615 putter Jack Nicklaus used to win the 1986 Masters. That putter had an extremely high moment of inertia (MOI), a measure of forgiveness, thanks to its all-aluminum construction, which allowed the putter to be made bigger but gave it a non-traditional sound.
The OS and OS CB putters have a high MOI, but don’t skimp on feel thanks to their thin-wall, polymer-filled construction. The putters are cast from steel and then “skim milled,” which gives them a premium look and consistent shaping. After the milling process, polymer is injected into the putter bodies to dampen their sound, and the backs of the putters are then sealed with a red aluminum insert. The OS and OS CB putters also use a new TaylorMade 6061 aluminum face insert, which is vertically milled to create more friction at impact for a better ball roll.
According to Long, the OS Daytona putter is 7 percent larger than last year’s Ghost Tour Daytona. The OS Daytona CB, which stands for “counter balanced,” has a heavier head and heavier grip to help golfers make a smoother stroke. Its putter head measures 13 percent larger than last year’s Ghost Tour Daytona. The OS Monte Carlo is 5 percent larger than last year’s Ghost Tour model and 12 percent larger in the CB version.
The new line also includes a Spider OS putter, which is available in a standard and CB version that has a more square look than past Spider models from TaylorMade.
All six putters will be in stores March 18, and come stock with SuperStroke’s Mid Slim 2.0 grip (the CB versions use a 13.75-inch SuperStroke 2.0 XL grip). Learn more about each model below.
Daytona Blade
- Price: $219 (standard), $249 (CB)
- Toe Hang: 36 degrees
- Lengths: Standard (33, 34, 35 inches), CB (34.5, 36, 38 inches)
- Head weight: 355 grams (standard), 395 grams (CB)
- Grip weight: 95 grams (standard), 130 grams (CB)
Monte Carlo Mallet
- Price: $219 (standard), $249 (CB)
- Toe Hang: 20 degrees
- Lengths: Standard (33, 34, 35 inches), CB (34.5, 36, 38 inches)
- Head weight: 355 grams (standard), 395 grams (CB)
- Grip weight: 95 grams (standard), 130 grams (CB)
Spider OS
- Price: $219 (standard), $249 (CB)
- Toe Hang: Face balanced
- Lengths: Standard (33, 34, 35 inches), CB (34.5, 36, 38 inches)
- Head weight: 355 grams (standard), 395 grams (CB)
- Grip weight: 95 grams (standard), 130 grams (CB)
See what GolfWRX Members are saying about the putters in our forum.
- LIKE111
- LEGIT31
- WOW16
- LOL6
- IDHT4
- FLOP11
- OB6
- SHANK70
Whats in the Bag
Steve Stricker WITB 2024 (April)
- Steve Stricker WITB accurate as of the Zurich Classic. More photos from the event here.
Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X
3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX
Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X
Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5
Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore
Putter: Odyssey White Hot No. 2
Ball: Titleist Pro V1x
Grips: Golf Pride Tour Velvet Grip Rite
Check out more in-hand photos of Steve Stricker’s clubs here.
- LIKE11
- LEGIT2
- WOW0
- LOL0
- IDHT1
- FLOP0
- OB0
- SHANK0
Whats in the Bag
Alex Fitzpatrick WITB 2024 (April)
- Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X
Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX
Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)
Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X
Putter: Bettinardi SS16 Dass
Grips: Golf Pride MCC
Check out more in-hand photos of Alex Fitzpatrick’s clubs here.
- LIKE3
- LEGIT0
- WOW0
- LOL0
- IDHT1
- FLOP0
- OB0
- SHANK0
Equipment
What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss
In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
- driveandputtmachine: “Still playing a MIni 300. The head was only 208, so I ordered a heavier weight and play it at 3 wood length. I am playing a Ventus Red 70. I play 70 grams in my fairways. I use it mainly to hit draws off the tee. When I combine me, a driver, and trying to hit a draw it does not work out well most of the time. So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck. The 300 Mini is very good off the deck.”
- JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”
Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”
- LIKE3
- LEGIT1
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK4
-
19th Hole2 weeks ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole5 days ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole3 weeks ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole4 days ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole2 weeks ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole2 weeks ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole1 week ago
Brandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
Chris
Jun 25, 2016 at 11:34 am
Imaginative responses. I’ve played a Newport 2 for 11 years – my first and only putter. Just bought this TM because the ball continued dropping center cut after three demo days. But you chumps know everything, right?
Rob
Jan 22, 2016 at 8:40 am
Nike look with the new Cleveland raised site line….sadly TM won’t be around by 2018
McCleod
Jan 22, 2016 at 6:39 am
If it helps me make putts and is legal, i don’t care what it looks like.
Jim
Jan 21, 2016 at 11:18 am
Look interesting, maybe a few too many bells and whistles, but overall ok (I use an original Spider putter). Not a fan of the aluminum insert though as I prefer the softer insert used in the original ghost putters. Will have to try in person I guess.
cgasucks
Jan 21, 2016 at 8:04 am
Wal-Martier!
Fahgdat
Jan 21, 2016 at 3:12 am
Sergio Garcia is no longer a teenager. Even he doesn’t want to dress it up like a clown any more. Get with it, TM
spazo
Jan 21, 2016 at 12:57 am
http://cdn.meme.am/instances/500x/60441268.jpg
DB
Jan 20, 2016 at 8:10 pm
Cool Ideas – Polymer fill, higher MOI
Bad – Red sight line, tacky looking, cheap looking insert, >$200.
Overall – Shank.
Aaron
Jan 20, 2016 at 5:46 pm
And TM wonders why they’re in trouble… If you make stuff like this and then attempt to peddle it to the discerning golfers at over $200 you deserve the lack of sales you’re about to see. They went from innovative and high performing/quality to a “churn it out” and we’ll market the hell out of it type of business model and this is just bad… They haven’t made a clean milled putter since the Kia Ma days and the comments on here should be read in their next board meeting.
Brodie Hock
Jan 20, 2016 at 3:21 pm
These putters = Odyssey & TM Nubbins Putters love child. 😛
RH
Jan 20, 2016 at 3:00 pm
Junkasaurus Rex
Fahgdat
Jan 21, 2016 at 3:10 am
+1
RoGar
Jan 20, 2016 at 1:05 pm
Same putters new paint job, keep putters clean, smooth, and simple…
Dj
Jan 20, 2016 at 12:44 pm
Uh, Nike much?
JohnJohn
Jan 20, 2016 at 2:01 pm
Yep looks like my 2013 Nike putter
Eric
Jan 20, 2016 at 12:42 pm
LOL