Connect with us

Equipment

Exotics releases CB Pro, EXd and EXi irons

Published

on

Exotics’ new line of irons in 2015 consists of the CB Pro Tungsten, which replaces the company’s CB PROh irons, as well as the EXi and EXd irons — replacements for Exotics’ E8 irons. They’re each made with new technologies to cater to the needs of different golfers.

CB Pro Tungsten irons

The CB Pro irons have hollow bodies, thin faces and are each made with a single W-Ni tungsten plates in the sole that weighs between 90 and 95 grams. The tungsten soles help lower center of gravity (CG), making them easier to launch.

CBproTechThe hollow cavities of the CB Pro Tungsten irons expands the sweet spot, increasing forgiveness and ball speed on off-center hits, and they have thin, 17-4 stainless steel faces that employ variable face thickness (VFT) technology. This means the center of the club is thicker than the areas on the face away from the sweet spot, giving off-center strikes a boost in speed.

The CB Pro irons (2-AW) are available in right-handed only, and the long irons in the set are available for individual purchase since the hollow-bodied, low CG designs make them great options to replace less forgiving long irons.

Shaft and pricing options

  • $799.99: (3-PW) KBS Tour 90 shafts (steel)
  • $899.99: (3-PW) UST Mamiya Recoil shafts (graphite)
  • Individual irons: $99.99 (steel), $119.99 (graphite)

Specs

CBProSpecs

CBproShafts

EXd irons

The EXd irons — “D” for distance — use several technologies to give golfers more distance and forgiveness. They have slots in the sole and an undercut cavity behind the face. The combination makes their faces very thin and hotter than their predecessors. Also, they utilize VFT technology to expand the sweet spot for greater ball speed on off-center strikes, and tungsten inserts behind the face on the heel and toe for a higher moment of inertia (MOI), a measure of the retention of ball speed on off-center hits.

EXDtechThe EXd irons are made from 431 stainless steel, with significant offset that will help golfers who tend to slice the ball square the face at impact, and a TPE insert in the cavity that is said to dampen sound and soften feel.

Shaft and pricing options

  • $599.99: (4-AW) KBS Tour 90 (steel)
  • $699.99: (4-AW) UST Mamiya Recoil (graphite)
  • $799.99: (3,4 hybrids/5-PW) KBS Tour 90 (steel)
  • $899.99: (3, 4 hybrids/5-PW) UST Mamiya Recoil (graphite)

Specs

EXdspecsEXdshafts

EXi irons

Like the EXd irons, the EXi irons are made with slots in the sole, undercuts behind the face and VFT technology — but they have less offset, thinner top lines and do not have tungsten inserts on the toe and heel. These differences make the irons more workable than the EXd irons, which will better suit the preferences of better players.

Shaft and pricing options

  • $599.99: (4-AW) KBS Tour 90 (steel)
  • $699.99: (4-AW) UST Mamiya Recoil (graphite)
  • $799.99: (3,4 hybrids/5-PW) KBS Tour 90 (steel)
  • $899.99: (3, 4 hybrids/5-PW) UST Mamiya Recoil (graphite)

Specs

EXiSpecsEXishafts

Exotics new irons will be available on Nov. 15.

He played on the Hawaii Pacific University Men's Golf team and earned a Masters degree in Communications. He also played college golf at Rutgers University, where he graduated with a Bachelor of Arts in Journalism.

5 Comments

5 Comments

  1. Bernie

    Nov 4, 2015 at 10:07 am

    These look amazing. I am definitely going to have to try and find a place to hit these!

  2. Sam

    Nov 4, 2015 at 7:55 am

    Dear golf companies,

    Left-handed golfers exist. That is all.

    Thanks,
    Irate Lefty

  3. Tim H.

    Nov 3, 2015 at 4:18 pm

    Hot damn. Exotics might be breaking ground into the irons market finally

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Interesting clubs at top of bag – GolfWRXers discuss

Published

on

In our forums, users are talking about top of bag setups that are non-traditional or thought-provoking in some way. Original poster @SuperSpurs106 inquired about other members who might use unorthodox set-ups to help with gapping issues or weak spots.

They wrote:

“I currently have a PING G430 driver, TM Qi35 3W and a TM Qi4D 7W. Driver and 7W are fine but can’t get on with my 3W and have always struggling with this club over the years. Thinking of adding a 2H which I know would look odd. Just wondering if anyone else had a weird set up at the top of their bag?”

Our members in the forum have offered up their thoughts and personal experiences with non-traditional top of bag set-ups, and their reasoning for thinking outside of the box to begin with. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • BowMain42: “Don’t worry about what “looks” odd. If the club does what you need it to do, it’s the right club.”
  • scooterhd2: “I cant hit 3 woods either. Thats why I roll with a unicorn XL Hibore 2 wood. 400 cc head at 16 degrees of loft and its just a monster 3 wood off the tee. Off the deck, we are playing the f6 baffler. 5 wood at 41.75 inches and its easy to control.”
  • phizzy30: “I had driver, 3 metal, 2/4 hybrid once upon a time as a higher ss player. 4 hybrid is gone and in place is a driving iron nowadays. I don’t think what you’re proposing is weird in anyway, however the yardage gap might be glaringly huge between driver and 2 hybrid. What is it about your 3 metal that has got you all messed up? You could always go 4 metal with shorter shaft and see if that works.”

Entire Thread: “Interesting clubs at top of bag”

If you aren’t a member, join us in the GolfWRX forums today!

Continue Reading

Equipment

Members of the Mini Driver Club – GolfWRXers discuss

Published

on

In our forums, one user has gone searching for fellow users of a mini driver. In a post, @TightFade asked for other mini driver users to chime in with their weapon of choice, the reason for employing a mini, and what club follows it in the bag.

@TightFade asked:

“What mini are you playing? What spot in the bag did it take over? What’s the next club after it? For me: Elyte mini 13.5. Replacing 3w. Next up club looks like it’ll be 5w.”

Our members in the forum have been sharing their own bag setups featuring the mini driver, and the various reasons they purchased one in the first place. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • RCGA: “Ping G430 Max 12* ‘Thriver.’ Next club is a 4w and 2i (I play a weird course).”
  • JMB3: “R7 at 12.75 with Diamana BB 63s. 3w replacement. Next Club: Elyte Ti 5w at 17*.”
  • ColdOkieGolf: “R7 15.5 turned down to 13.5 It replaces the 3w. I found it surprisingly easy to hit off the deck, and it’s very rare that I need or want to hit something beyond 250 from the fairway, so next club is my 7w.”
  • ChaosTheory: “I’m sub-90 MPH with driver. But I’m able to hit DOD. I have been wanting something like the R7 15.5, so I just ordered one. I have a spot in the bag so nothing has to go. But I could see it replacing my trusty 4 wood, which I never use for approach shots. Just tee shots and lay ups. If I drop the 4 wood, I will turn my 7 wood down to ~20 degrees and will have good gaps. I recently tried a thriver build: 12 degree driver turned to 14, with a heavier 44 inch shaft and added head weight. I hit it great. Very accurate and not overly high, but the problem was that it sometimes went as far as a typical drive. And that’s not what I needed. So I will probably turn the 15.5 up to 16.5 or even 17.5. It’s all theoretical at this point. ?”

Entire Thread: “Members of the Mini Driver Club…Check In.”

If you aren’t a member, join us in the GolfWRX forums today!

Continue Reading

Whats in the Bag

Chris Gotterup WITB 2026 (June)

Published

on

  • Chris Gotterup had >14 clubs in his bag when photographed prior to the Memorial Tournament.

Drivers: TaylorMade Qi4D (8 degrees), Ping G440 LST (9 degrees @8), Ping G440 LST (7.5 degrees)
Shafts: Project X HZRDUS Smoke Grey 6.5 TX 70 g, Project X HZRDUS T1100 Handcrafted 6.5 TX 70 g, Project X HZRDUS Smoke Grey 6.5 TX 70 g

Mini driver: TaylorMade BRNR (13.5 degrees)
Shaft: Project X HZRDUS Black TX 80 g

5-wood: TaylorMade Qi4D (18 degrees)
Shaft: Mitsubishi Chemical Diamana WB Wood Shaft 83 TX

7-wood: TaylorMade Qi4D (21 degrees)
Shaft: Mitsubishi Diamana WB Wood Shaft 83 TX

Irons: TaylorMade P770 (3), Bridgestone Tour B 220 MB (4-9)
Shafts: KBS C-Taper 130 X

Wedges: TaylorMade MG5 (46, 52, 56, 60)
Shafts: KBS C-Taper 130 X, True Temper Dynamic Gold Tour Issue X100

Putter: TaylorMade Spider X Tour
Grip: SuperStroke Zenergy Pistol 2.0

Grips: Golf Pride Z Grip Cord

Ball: Bridgestone Tour B X Mindset

Check out more in-hand photos of Chris Gotterup’s clubs here.

Continue Reading

Announcement

Our Privacy Policy and Terms of Use have been updated as of January 29th, 2026. Please review the updated policies here Privacy Policy | Terms of Use. By continuing to use our site after January 29th, 2026, you agree to the changes.

WITB

Facebook

Trending