Connect with us

Equipment

Cleveland Gives New TFi 2135 Satin Putters A Face Lift

Published

on

Cleveland has launched its new TFi 2135 Satin putters that combine model-specific face milling with its familiar raised sightline to help golfers achieve better speed and alignment.

The original TFi 2135 putters used a raised sightline that was 21.35 millimeters off the ground, which is also the height of the equator of a golf ball. According to Cleveland, the technology helps golfers better align their putters, see their line more easily, and address the ball in the center of the putter more consistently. Here’s a video to explain how it works.

That “2135” technology is back again, but with a whole new look. Compared to the original TFi 2135 putters, the most noticeable difference is a new satin finish that has a greater contrast with the sightline. The milling on the face is where these putters have really changed, however, and why they’re built for better speed control.

MilledFace

As you can see in the image above, the milling lines are condensed near the center of the putter faces and spread out progressively as they move toward the toe and the heel. That’s to help the ball come off a bit faster when it’s struck off-center. Since fewer milling marks will create less friction, the ball will bounce off the face faster where the milling marks are more spread out.

But that’s not all.

Each separate head model — since they have a different moment of inertia (MOI, a measure of forgiveness) and a different center of gravity (CG) — has specially designed face milling. More specifically, the higher MOI models (re: mallets) have a more gradual variation of mill marks, while the lower MOI models (re: blades) have a more rapid variation. For golfers, this simply means more forgiveness on off-center strikes with each of the putters, hopefully leading to better consistency, speed control, and fewer three putts.

c99bbe6e18e8c807fc540416751f4b84

For the familiar soft feel of the TFi 2135 putters, Cleveland uses a TPU (thermoplastic urethane) insert to dampen vibrations at impact. This combines with three-times deeper milling on the face to create a softer feel then the original TFi 2135 putters and previous iterations of Cleveland putters.

Cleveland’s new TFi 2135 putters will be in stores September 15 in six different head models. The mallet and blade putters will sell for $149.99, and the counter-balanced putters (8.0 and Elevado CB) will sell for $179.99. The putters come stock with either a Lamkin TFi 2135 blue grip or a Cleveland Oversized grip. Cleveland Oversized Counterbalanced grips are also available for a $10 upcharge.

Discussion: See what GolfWRX members are saying about the 2135 Satin putters

TFi 2135 Satin 1.0

  • Head Type: Blade
  • Hosel Type: Plumber’s Neck
  • Length: 33, 34 and 35 inches
  • Lie Angle: 70 degrees
  • Loft: 3 degrees
  • Head Weight: 345 grams
  • Grip Weight: 85 grams
  • Dexterity: RH/LH

TFi 2135 Satin 8.0

  • Head Type: CB Blade
  • Hosel Type: Single Bend Heel
  • Length: 35 and 38 inches
  • Lie Angle: 70 degrees
  • Loft: 3 degrees
  • Head Weight: 405 grams
  • Grip Weight: 148 grams
  • Dexterity: RH Only

TFi 2135 Satin Elevado 

  • Head Type: Mallet
  • Hosel Type: Single Bend Heel
  • Length: 33, 34 and 35 inches
  • Lie Angle: 70 degrees
  • Loft: 3 degrees
  • Head Weight: 370 grams
  • Grip Weight: 85 grams
  • Dexterity: RH Only

TFi 2135 Satin Rho

  • Head Type: Mallet
  • Hosel Type: Single Bend Heel
  • Length: 33, 34 and 35 inches
  • Lie Angle: 70 degrees
  • Loft: 3 degrees
  • Head Weight: 370 grams
  • Grip Weight: 85 grams
  • Dexterity: RH Only

TFi 2135 Satin Cero

  • Head Type: Mallet
  • Hosel Type: Single Bend Heel
  • Length: 33, 34 and 35 inches
  • Lie Angle: 70 degrees
  • Loft: 3 degrees
  • Head Weight: 370 grams
  • Grip Weight: 85 grams
  • Dexterity: RH Only

TFi 2135 Satin Elevado CB

  • Head Type: CB Mallet
  • Hosel Type: Single Bend Heel
  • Length: 35 and 38 inches
  • Lie Angle: 70 degrees
  • Loft: 3 degrees
  • Head Weight: 405 grams
  • Grip Weight: 148 grams
  • Dexterity: RH Only

Discussion: See what GolfWRX members are saying about the 2135 Satin putters

Your Reaction?
  • 117
  • LEGIT9
  • WOW2
  • LOL5
  • IDHT4
  • FLOP0
  • OB1
  • SHANK16

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

19 Comments

19 Comments

  1. Mat

    Aug 31, 2017 at 6:09 am

    Ping is going to sue over this one…

  2. Chris C.

    Aug 29, 2017 at 5:28 pm

    In a world increasingly populated with $400.00 putters, I think that it is great that this line of putters will be selling for less than half that amount. I look forward to testing the Rho. I only wish that it had come with either a plumbers neck or flow neck. Alas! there are some limitations when one is charging less than half the other guys.

  3. Cleveland

    Aug 29, 2017 at 2:52 am

    BEST PUTTERS EVA.

  4. DB

    Aug 28, 2017 at 3:41 pm

    These are great putters for the money, and these look even better than the original.

    • ooffaa

      Aug 28, 2017 at 5:35 pm

      Oh ya…. “the looks”…. that’s what really matters …. are you a child?

      • DB

        Aug 28, 2017 at 7:42 pm

        You seem like a stable person.

        • GG

          Aug 28, 2017 at 9:10 pm

          And you obviously work for Cleveland. Keep on lying.

          • DB

            Aug 29, 2017 at 12:29 am

            Wrong.

            I’m a guy who rolled one at a GG and liked it. But yes, I’ve noticed that anyone here who likes these putters has been accused of working for Cleveland. That’s nice.

            • alan b

              Aug 30, 2017 at 2:03 am

              Your original comment was about the price and the looks as reasons to buy it. Now you claiming you “rolled one” and you liked it. Sounds like a “doobie” putter… lol

  5. Jiminy

    Aug 28, 2017 at 2:04 pm

    same old, same old stuff… at high prices.

  6. Boss

    Aug 28, 2017 at 11:02 am

    They look sexy

    • ooffaa

      Aug 28, 2017 at 5:36 pm

      you are gender confused

      • Oppai

        Aug 30, 2017 at 1:52 am

        You would know, from experience, of course

        • alan b

          Aug 30, 2017 at 2:04 am

          Anybody who calls golf clubs ‘sexy’ is confused and needs help but not for golf.

  7. birdy

    Aug 28, 2017 at 9:54 am

    Not even close….these putters are far and away the best putters for the money. ignore price and these compete with every high dollar putter. great feel, looks, and performance. now just wish more retail stores carry them.

    • ooffaa

      Aug 28, 2017 at 5:37 pm

      thank you Cleveland Golf

      • tom

        Sep 2, 2017 at 12:16 am

        Ridiculous comments like this are why I rarely come to this site anymore.

        • Realist

          Oct 20, 2017 at 1:04 pm

          Keyboard warriors are destroying the very fibers of this country. Forum quality is diminishing as a result.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Joaquin Niemann WITB 2020

Published

on

Joaquin Niemann - WITB January 2020

Driver: Ping G410 LST (10 degrees)
Shaft: Graphite Design Tour AD DI 7 X (45.25″, tipped 1″)

joaquin-niemann-witb-2020

3-wood: Ping G410 (14.5 degrees)
Shaft: Graphite Design Tour AD DI 8 X (tipped 1″, 43″)

Hybrid: Ping G400 (19 degrees)
Shaft: Graphite Design Tour AD DI Hybrid 95 X (40.25″, D2)

Irons: Ping iBlade (4-9)
Shafts: Project X Rifle 6.0 (-1/4″, D1)

Wedges: Ping Glide 3.0 (46-12 degrees), Ping Glide Forged (52, 56, 60 degrees)
Shafts: Project X Rifle 6.5

Putter: Ping Prototype PLD Anser (Black finish)
Grip: Ping PP58 Midsize Full Cord

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet

Your Reaction?
  • 16
  • LEGIT2
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Shaft fitting: Is it worth it? – GolfWRXers have their say

Published

on

In our forums, our members have been discussing shaft fitting and whether it makes a substantial difference or not. WRXer ‘2ndCut16’ recently snagged a set of heavily discounted T100 irons on eBay and asks members:

“My question is, is it worth going to get a shaft fitting? They currently have DG S300, which was what was in my 714AP2 ( I was not fit for these either), but I’m curious how much the shaft may make a difference? I’m sorry if this has been covered before, I’m just recently was bit by the equipment bug and am trying to learn all that I can.

Given that I saved a good junk of the cost of the clubs, I’d be willing to spend a little to get the right shaft, if it is actually going to make a difference, I just wanted to check here before I spent the $100 for the shaft fitting.”

And our members have been having their say in our forums.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • nhaun2: “I definitely think it’s worth it with the way the technology has progressed the last 5-10 years. $100 seems kinda steep, but I feel like most places will credit that back or at least a portion of it if you make a purchase through them.”
  • Ri_Redneck: “Never worry about paying for something that is worth the price to YOU! If your goal is to be the best golfer you can be, then your priorities are far different from the average weekend golfer. Fitting is typically expensive, but the information you get can be well worth the cost. As ChipNRun mentioned. Most of us have a swing that probably won’t change much over the next few years. Knowing what shaft characteristics fit you allows you to oftentimes choose a set of ideal clubs right off the rack! Knowledge of your equipment will help you make the most of your equipment buying dollars and avoid falling prey to the marketing that is so prevalent today.”
  • thesamewise: “1 million percent worth it. The right shaft will complement your game and can accentuate your strengths and mask some of your flaws a little. I got the right shafts in my irons, and I just can’t believe how much they help.”
  • Ruleschamp: “Not gonna make that much of a material difference in terms of performance but if you want them to feel the way you like the club to feel then go for the fitting and just enjoy the fun.”
  • GLF4EVR: “Piece of mind may be worth it just so you do not have that little thought in the back of your mind about it. I have done my own tinkering for many years now. I have never had any lessons, and all the club building I have done was thru this site. Had the chance to see a professional fitter last year. Spent over 2 hours going over every club in the bag & was charged only $65. Only recommendations were what kind of graphite shafts to put in my irons if I want to switch & to play with the bounce on my 58 wedge. To me, that was the most worthwhile $65 I have spent on golf in a long time. To find out I was correct in all my work & the way I had gone about; it was just about priceless for me. It is kind of strange to not have that little voice in the back of my head anymore with any questions about my equipment & the fine-tuning I have done. My only thing I would say is to make sure the fitter knows what they are doing.”

Entire Thread: “Shaft fitting: Is it worth it?”

Your Reaction?
  • 23
  • LEGIT3
  • WOW0
  • LOL2
  • IDHT0
  • FLOP2
  • OB1
  • SHANK2

Continue Reading

Equipment

Chicago Cubs player Ian Happ auctioning off his 1/1 Bettinardi putter with proceeds going to Covid-19 relief

Published

on

Chicago Cubs Centerfielder Ian Happ is auctioning off his PROTO IH8 Bettinardi with all proceeds from the sale going to Covid-19 relief efforts for Cradles to Crayons.

The putter, which is open for bids until June 8, is a custom Bettinardi Queen B 8 Slant Neck milled to 365 grams from Double Aged Stainless Steel.

 

A 1/1 used by Happ on the course, the flat-stick features the MLB star’s chosen logos, including the Bettinardi ‘Hive’ logo in the pocket, IH8 Proto on the sole, and also his father’s initials KH. 

 

The putter comes with a unique team-only issued 2016 World Series Cubs Championship headcover, signed by Ian Happ on the W side and a Lamkin Deep Etched Grip.

 

Specs: 

  • Model: Bettinardi Queen B 8 Slant Neck
  • Dexterity: Right-Handed
  • Weight: 365g
  • Length: 35 inches
  • Face Milling: F.I.T. Face (Feel Impact Technology)
  • Finish: Black Chrome

You can bid on the putter here, with the current leading bid as of June 3 currently at $450.

Your Reaction?
  • 3
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

WITB

Facebook

Trending