Equipment
Miura Launches MG Collection Irons: CB-2008, CB-1008 and MB-5005
Miura Golf has launched three new iron models in North America: its CB-2008, the CB-1008 and the MB-5005.
The three irons are part of Miura’s MG, or “Miura-Giken” Collection, which like the company’s recently announced Hayate drivers and fairway woods were previously only available in Asia. The new launch unifies the Miura product line internationally, a key aspect of the company’s recent re-branding efforts. It also sets the stage for a worldwide launch of entirely new Miura product, which is expected in 2018.
In North America, Miura is known primarily for its one-piece forged irons, specifically its blade and blade-like models that target better players. The expansion of the MG Collection gives North American golfers access to two additional better-player irons, as well a mid-sized, multi-material forged iron that can offer golfers additional distance and forgiveness. Learn more about each of the irons below.
Miura MG Collection: CB-2008
The CB-2008 irons have the widest sole of the company’s MG Collection irons (its 20-millimeters wide on the 7 iron), as well as a multi-material construction. Together, the design offers golfers more distance, more forgiveness and more confidence in their game. Compared to Miura’s Passing Point Neo Genesis PP-9005 irons, the CB-2008 irons will offer golfers a more compact size and appearance, as well as a softer feel.
The CB-2008 long irons (5-8) start as a single billet of carbon steel, which is forged into a shape that becomes the body of the club heads. A 4-millimeter forged club face is then welded to the front of the irons to boost performance (see the photos in the gallery above). The short irons (9, PW) use a one-piece, forged construction.
“The CB 2008 epitomizes how advancements in technology can be delivered to golfers of all skill levels,” says Bill Holowaty, COO of Miura Golf. “The midsize clubhead combines a soft carbon forged face and neck with a composite, pocket cavity back. This design allows for a wider sole, lower center of gravity, larger sweet spot and more forgiveness.”
The CB-2008 irons are available in 5-PW and sell for $339 per club.
Miura MG Collection: CB-1008
Like the CB-2008 irons, the CB-1008 irons offer golfers a wide sole (it’s 19 millimeters in the 7 iron). The difference is that unlike the hollow-cavity CB-2008 irons, CB-1008 irons use a one-piece, forged construction that positions mass directly behind the sweet spot of the irons.
The one-piece design of the CB-2008 irons is intended to mimic the feel of the company’s blade irons, while delivering the higher flight and additional forgiveness of Miura’s more forgiving models like the CB-2008 and PP-9005.
The CB-2008 irons are available in 3-PW and sell for $279 per iron.
Miura MG Collection: MB-5005
Miura’s MG Collection MB-5005 irons look and feel much like the company’s traditional blade irons, the company says, but a unique cavity-back structure allows the irons to offer more forgiveness.
Compared to its traditional blade irons, the cuts and channels on the back of the MB-5005 irons trim approximately 15 grams of weight from design, Miura says. The discretionary mass allowed the company to increase the size as the irons, as well as lower the center of gravity, both of which served to expand the sweet spot of the clubs.
The MB-5005 irons are available in 3-PW and sell for $329 per iron.
- LIKE87
- LEGIT12
- WOW17
- LOL2
- IDHT1
- FLOP5
- OB6
- SHANK29
Whats in the Bag
Steve Stricker WITB 2024 (April)
- Steve Stricker WITB accurate as of the Zurich Classic. More photos from the event here.
Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X
3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX
Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X
Irons: Titleist T100 (3-9)
Shafts: Project X 6.5
Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore
Putter: Odyssey White Hot No. 2
Ball: Titleist Pro V1x
Grips: Golf Pride Tour Velvet Grip Rite
Check out more in-hand photos of Steve Stricker’s clubs here.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Whats in the Bag
Alex Fitzpatrick WITB 2024 (April)
- Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X
Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX
Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)
Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X
Putter: Bettinardi SS16 Dass
Grips: Golf Pride MCC
Check out more in-hand photos of Alex Fitzpatrick’s clubs here.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss
In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
- driveandputtmachine: “Still playing a MIni 300. The head was only 208, so I ordered a heavier weight and play it at 3 wood length. I am playing a Ventus Red 70. I play 70 grams in my fairways. I use it mainly to hit draws off the tee. When I combine me, a driver, and trying to hit a draw it does not work out well most of the time. So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck. The 300 Mini is very good off the deck.”
- JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”
Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”
- LIKE3
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
-
19th Hole2 weeks ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole4 days ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole2 weeks ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole4 days ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole1 week ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole2 weeks ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole1 week ago
Brandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
rex235
Jun 27, 2017 at 11:33 am
Pretty much like most new Miura CNC Milled irons… RH Only.
The dude
Jun 21, 2017 at 12:19 pm
Those Pics tell me nothing!!…why no set up pics???….that’s all most good players care about…(how they appear when you set them down). And how are they “softer”???
Skip
Jun 21, 2017 at 5:30 pm
Check out mcmahongolf on Instagram. They’ve got the 5005 and 1008 from all angles. I found the s25c used in these heads to be softer than the steel used in the North American lines.
Matt
Jun 21, 2017 at 3:41 am
Looking a bit like Srixon’s Z iron range.
Max
Jun 21, 2017 at 12:43 am
Why wouldn’t I just buy the Japanese version from Tour Spec for over half off these listed prices?
Guia
Jun 20, 2017 at 7:08 pm
They look nice, cost too much.
chinchbugs
Jun 20, 2017 at 6:08 pm
When did irons start costing more than woods? Oh yeah, 2017. That’s when.
Ude
Jun 20, 2017 at 1:59 pm
wicked >>> tora tora tora
IowaHacker
Jun 20, 2017 at 1:19 pm
They could do without the ugly MG logo on there and just kept the script-ish Miura. This new logo looks just like the cheap MG Golf products, not something as high quality like these are intended.
Was
Jun 21, 2017 at 2:35 am
But that logo has been there for years though lol
Matt
Jun 20, 2017 at 12:39 pm
I’m sorry, thats some fugly equipment.
Brian
Jun 20, 2017 at 4:09 pm
What do you play?
Matt
Jun 20, 2017 at 10:37 pm
MP-4 irons. 2016 M2 driver. Srixon F45 3 wood. UDI 3 iron. Exotics DG Proto putter. Vokey wedges.
Matt
Jun 20, 2017 at 10:47 pm
In fairness I didn’t click through the photos. Irons aren’t quite as bad as I initially thought. That logo is rough though. I’m not a looks guy anyway, was really just a random comment, if it plays well (and the steel does look pure) I’d game it in a second.
ComeyforPresident
Jun 20, 2017 at 11:08 am
Any differences in the manufacturing process between these clubs and those from the JDM?
Was
Jun 20, 2017 at 12:54 pm
They’re the same clubs. New licensing agreement has made it possible for them to distribute and sell them in the US
Bill
Jul 14, 2017 at 5:12 pm
They could always distribute in the US but out of BC Canada.