Connect with us

Equipment

Callaway’s new high-end Epic, Epic Pro irons and hybrids

Published

on

How does Callaway follow up the most popular new drivers on the market? It introduces a set of players irons built like game-improvement irons with never-before-seen technology, of course.

With its new Epic and Epic Pro irons, Callaway is introducing a new weighting system that starts with tungsten-powder pellets to dial in the performance and feel of each iron. It’s also bringing more distance and forgiveness into Pro-style irons (re: smaller frames, toplines and sole widths), helping the Epic Pro irons create more ball speed than the company’s popular Apex CF ’16 irons.

It’s no accident that irons called “Epic” are introducing new technology to the world of golf clubs. With its GBB Epic and GBB Epic Sub Zero drivers, Callaway gave the golfing world “Jailbreak,” or two titanium rods that connected the crown and the sole to produce more ball speed and overall distance.

Discussion: See what GolfWRX members are saying about Callaway’s Epic irons

Discussion: See Callaway’s Epic iron in hand photos and comparison pics with other irons

EXOCage

Like Callaway’s Big Bertha irons, the Epic and Epic Pro irons use Callaway’s Exo-Cage design.

For the irons also bearing the Epic name, Hocknell and a team of 70 or more engineers had no boundaries or budget to create game-changing irons. Hocknell’s goal was to create a Pro iron with distance-enhancing technologies. As such, “Doc’s Irons,” as the Pro irons were referred to internally at Callaway, were given Face Cups and an “Exo Cage” steel structure (pictured above) to support the Face Cups. While Callaway has used Face Cups to increase ball speeds in its metal woods and game-improvement irons, it has never before added the technology to a set of players irons like the Epic Pro.

Epic Pro Irons Gallery

The Epic Pro irons also employ a tungsten-steel weighting system that yields greater control over where center of gravity is placed inside each iron. The weights start as tungsten and steel powders, which are then cooked for 51 hours at 2,500 degrees Fahrenheit before they’re injection molded into the center of the irons. The long irons use the intricately-shaped weights that are positioned low and toe-ward in the heads to influence a higher ball flight, while the shorter irons have the weights placed higher in the heads to encourage more spin, control and workability. This means each individual iron has a specialized center of gravity that plays to the needs of that iron.

TungstenWeighting

This weighting system also allows Callaway to control the weight of the heads. The company can make the club heads up to 5 grams heavier or lighter depending on a golfer’s needs, which gives consumers the same head-weight options as Callaway’s Tour players, the company says.

HoselThe two-piece structured irons also have a hosel that weighs nearly 30 grams less than the Apex 2016 irons. Eliminating weight from the hosel allowed Callaway to use that weight more efficiently, and helped to build up a stronger Exo Cage backbone.

The result of the new design is 0.5 mph of added ball speed compared to the Callaway Apex irons, according to Callaway, which are widely considered one of the longest-flying game-improvement irons available. As a reminder, the Epic Pro irons are more of a players irons, making those ball speeds quite impressive.

Epic Irons Gallery

Although the original intent of Hocknell’s design was for a Pro-style iron, he asked himself “What would happen if you enlarged the size?” Thus, the Epic game-improvement irons were birthed. The Epic irons have the same Exo Cage and tungsten-infused weight system that the Epic Pro irons utilize, except they have more offset, wide soles, larger club faces and slightly stronger lofts. Golfers can expect these irons to be a half-club longer than Callaway’s Apex irons, according to Callaway. They will suit the fancy of golfers who need a bit more forgiveness and distance than the Epic Pro offering.

The Epic and Epic Pro irons will sell for $250 apiece with steel shafts and $280 each with graphite shafts. If those price tags shock you — and we don’t blame you if they do — welcome to the current state of the market where high-end irons are more common than ever.

Epic Hybrid Gallery

To round out the line of Epic clubs, Callaway is also introducing Epic hybrids that use the same technologies as Epic fairway woods. That’s to say they have lightweight, carbon crowns and the company’s Face Cup technology to produce distance and forgiveness. They’re available for $279.99 each in 2, 3, 4 and 5 hybrid options.

Epic, Epic Pro and Epic hybrids will be available in stores and through Callaway’s website June 16.

Discussion: See what GolfWRX members are saying about Callaway’s Epic irons

Discussion: See Callaway’s Epic iron in hand photos and comparison pics with other irons

 

Your Reaction?
  • 166
  • LEGIT30
  • WOW23
  • LOL26
  • IDHT9
  • FLOP29
  • OB24
  • SHANK399

He played on the Hawaii Pacific University Men's Golf team and earned a Masters degree in Communications. He also played college golf at Rutgers University, where he graduated with a Bachelor of Arts in Journalism.

66 Comments

66 Comments

  1. Jon P

    Dec 8, 2019 at 3:41 am

    Got these for $550 4-aw project x LZ 105, they are AMAZING.

  2. John Krug

    Aug 30, 2017 at 10:25 am

    Why does the 2 hybrid have a loft of 18 degrees instead of 16 degrees?

  3. Mikee

    Jun 9, 2017 at 9:37 am

    I hit the new Epic CF17 last night. I was impressed. They don’t look great but………numbers don’t lie!

  4. TeeBone

    Jun 8, 2017 at 2:58 am

    Congratulations…your first post that made sense!

  5. TeeBone

    Jun 8, 2017 at 2:56 am

    “No boundaries or budget”? Ahh, the “PXG Effect”. $250 – 280 per iron? Ahh, the “PXG effect”. If the herd didn’t still think they can buy a game, these ridiculous prices wouldn’t fly.

  6. cray

    May 25, 2017 at 10:37 am

    Guys like you are boring. Hate to hate. First tee baby. My 250 3 iron down the center with high flight will be nice as you bang your 200 straight down the center.

  7. Lob Wedge

    May 25, 2017 at 3:53 am

    Dear Callaway,

    Congrats on picking up the Taylormade Marketing department.

  8. KK

    May 24, 2017 at 10:06 pm

    So all of these golf pioneers were just lying crooks cheating uninformed golfers: Ping with their Eye2 irons, Callaway with their Big Bertha drivers, TaylorMade with their R drivers, Vokey with his wedges. Right. I see your brilliance. I really do.

  9. Dave R

    May 24, 2017 at 5:32 pm

    Tom you are right on well said. Hope some one in the golf market understands and starts to listen. Seems the billionaire is the one calling the shots with his screws in the clubs, the other companies just jumping on board . What’s the limit the market will bear? Only time will tell. I’ll continue to hack with my cheap 5 year discounted mizuno. They still work sometimes.

  10. Tom54

    May 24, 2017 at 3:45 pm

    $250 a club? What are they thinking when they plop this price on ? A nice set of irons might be worth $1200-1400 Even at that price it’s up there. Good irons last several years with proper care and grip changes. Only problem nowadays is if you’ve got a nice set for couple of years it is now 3-4 models old and no longer relevant. Let’s face it all clubs are maxed out technology wise so all they are doing is a cosmetic change here and there but you’ve just got to have it. Best way to go is wait 6 months and get today’s hot item for a fraction of the cost. I believe they have not found the holy grail club if it has to be changed twice a year.

  11. dcorun

    May 24, 2017 at 1:36 pm

    I’m not a hater of any golf company but, I just don’t understand what’s going on. They say the game is going in the tank and then can’t understand why. People may think the economy is getting better but, $2000 for a set of irons better? As a previous member posted, practice and getting some lessons will help more than any club you buy. They have a driverless car but, haven’t invented the golf club that swings for you. What they need is another category for clubs.

    Players Clubs
    Game Improvement Clubs
    Super Game Improvement Clubs
    I HAVE MONEY TO BURN CLUBs.

  12. King of Carlsbad

    May 24, 2017 at 1:01 pm

    Seem fantastic. Same haters had Callaway going out of business years ago.

    • Me

      May 24, 2017 at 3:21 pm

      It wasn’t haters, Callaway was practically a penny stock a few years ago. Poor distribution, 100s laid off, way over inventoried, low demand, marketing was awful, and retail prices were falling. Speculation was Nike was ready to pounce and probably should have. Nothing to do with hatred, just a grim reality of business.

  13. Dave R

    May 24, 2017 at 12:28 pm

    Really $250.00 a club COM ON BOYS ? ONLY THE RICH PLAY GOLF IN THE FURTURE!!!!!!!! . Thought we were trying to promote the game not get rid of it.

  14. Joro

    May 24, 2017 at 10:36 am

    They are for people with way more money than a game. They are just continuing on their quest to buy a better game. Find a good teacher instead. You will not see very many real players with these, at least after a month. Part of their contract may require playing them for a while, but then back to the Gamers. Just another marketing scam for a production Club.

  15. MySlice

    May 24, 2017 at 7:26 am

    I guess in keeping with tradition, they HAD to release them but they are definitely ugly. Someone will like them im sure.

  16. Matt

    May 24, 2017 at 3:14 am

    Wow, those irons are really fugly. 70 engineers but obviously none with a good eye.

  17. Judge mental

    May 24, 2017 at 3:06 am

    Golf clubs for rich kids

  18. Mat

    May 24, 2017 at 1:44 am

    Even
    Phil
    Is
    Cringing

  19. Mat

    May 24, 2017 at 1:43 am

    Embodied
    PXG
    In
    China

  20. Mat

    May 24, 2017 at 1:41 am

    Engineering
    Poor;
    Insane
    Cost

  21. tlmcik

    May 23, 2017 at 9:05 pm

    Rube Goldberg would be proud.

  22. TWShoot67

    May 23, 2017 at 7:58 pm

    I just find it hilarious that they are trying to sell us on SEVENTY I mean over SEVENTY engineers have worked on this aeronautical design. to get 0.5 mph increased ball speeds. And will that mean that crazy ECO Cage frame be Casted or forged? CNC’d? All this cost must be paying for those over 70 engineers. lol. I guess you really can’t blame them because if you listen to PXG they are killing it with a one of a kind tech, that’s why I see at least 1-2 sets being sold every week in the BST ( because the owners are so happy with this product). I see the same thing happening here with this Callaway product. They’re betting on those individuals that have that big bank account who still thinks its better to spend thousands of dollars on high end clubs then to buy lessons. As hard work and dedication is just that hard. It’s easier to try a hopefully buy a game. Have fun boys. all of this wonderful tech and still amateur golfers scores are no better then when they went out and picked up 200.00 sets of irons. Now they pay 2,000.00 a set and still can’t break a 100. I think maybe Callaway has too many engineers at one company to design a set of clubs.

  23. Mark

    May 23, 2017 at 7:58 pm

    Are those the new RBZ irons?

  24. MrPoopoo

    May 23, 2017 at 7:49 pm

    hmm… Epic Ugly from a decal/graphics side, but at least they look pretty good from address… which is more important anyway.

    Better players don’t care about ball speed on irons. Distance control, consistency and workability are more important. Trajectory is important, but that can be adjusted with shaft fittings.

  25. Eric B

    May 23, 2017 at 7:46 pm

    Lol cast clubs at Japanese forged prices. FoH Callaway.

  26. Duk Koo Kim

    May 23, 2017 at 7:13 pm

    He said “Nickent!” Great call!!

  27. Sam

    May 23, 2017 at 6:58 pm

    These irons are just compact hybrids. With Callaway’s reputation for quality, you’re going to get some real heaters that fly 20 yards past the green

  28. John

    May 23, 2017 at 5:13 pm

    Yes, golfers are looking for GI irons that look like players irons. Like Ping I200. Now those are some nice looking irons.

  29. AceW7Iron

    May 23, 2017 at 4:05 pm

    Yep..Im die-hard in the prime of my buying life but these are outside the boundary. I did reach for the Epic driver used off the Bay but $280 for just 1 iron? Off the hizzy…
    Im out… Enjoy them Gates & Company

  30. brian

    May 23, 2017 at 3:57 pm

    haha, I wouldn’t bag those ugly sticks for $800 a set, let alone $2k. Good luck with that, Callaway.

  31. Joey5Picks

    May 23, 2017 at 3:28 pm

    Their target market: people with more money than sense.

  32. Bob Jacobs

    May 23, 2017 at 3:14 pm

    I guess their figuring that PXG irons go for a ton of money, so what they heck, let’s go for it!! Silly

    I just dont get why these manufacturers dont go for a cleaner look all around. Also who came up with this incredibly gross green color theme?? I own an Epic and love it, but certainly not from an aesthetics standpoint.

    C’mon guys, give us less marketing, labels and phony tech looking stuff on the outside of the club!!

  33. Minnesota golfer

    May 23, 2017 at 2:06 pm

    It’s ridiculous the lofts of the Epic Irons are even stronger (lower number) than Apex cf16 irons. Definitely game improvement irons. PASS.

  34. alexdub

    May 23, 2017 at 12:42 pm

    Lolz. $2k for face cups. I bet these are no different than the XR Pros. Callaway is doing is their own litmus market test for a higher price point — something akin to what Titleist did with the C16 line.

    • LH

      May 23, 2017 at 8:31 pm

      You mean no different to the original Fusions.

  35. Steve

    May 23, 2017 at 11:11 am

    Titleist sold their full stock of C16 irons so Callaway jumps on the bandwagon.

    In 2 years the “standard” set of irons will cost $1500.

  36. Prut

    May 23, 2017 at 11:00 am

    They have Nickent look to them.

  37. Dat

    May 23, 2017 at 10:25 am

    “If those price tags shock you — and we don’t blame you if they do — welcome to the current state of the market where high-end irons are more common than ever.”

    The prices don’t shock me at all. Especially from a cheesy marketing company like Callaway Golf – which is exactly that. Their clubs, aside from the Rory MB protos, are purely built on technology that is over a decade old in new skin and fancy graphics. The market will only bear this for so long; so take advantage while you can, Callaway. Ride is about to end. Golf is in for a rude awakening when these clubs fizzle at retail. Everyone saying, “I told you so” is going to be correct here. Most players want a set of irons at $1000 or less, not $2000 or more.

    • Vanessa Carlysle

      May 23, 2017 at 2:59 pm

      +1000

      The last two announcements on WRX from Callaway/Odyssey have been embarrassing.
      1. The red putters – copied exact color from TM – Pathetic
      2. High Price, Ugly look Irons – copied idea from PXG – Pathetic

      Would like to see more imagination, innovation and origination from this company, but not going to hold my breath

    • setter02

      May 23, 2017 at 4:46 pm

      Just makes them seem like a bargain when they are 50% off in 6-8 months and they are still making money off of them. Retailers not to much, but the OEM’s don’t care about them as the ‘cost’ pricing keeps going up and up and up for no real reason.

    • Feel the Bern

      May 23, 2017 at 7:47 pm

      I agree with you, but I would add that the Rory MB’s are built on technology over 4 decades old!

      • Me

        May 24, 2017 at 3:30 pm

        Rory no longer plays with Callaway blades….he now plays Taylormade. Just sayin

  38. C

    May 23, 2017 at 10:05 am

    That’s a lot of offset.

  39. SoCalSlicer

    May 23, 2017 at 10:02 am

    How many levels of approval do these go through, before they are given a green light? Those have to be some of the worst, and I mean the most hideous irons I’ve ever seen. Ever. Good god.

  40. BB

    May 23, 2017 at 9:52 am

    $250 an iron? Overpriced junk.

  41. Leon

    May 23, 2017 at 9:22 am

    Callaway will be the next Taylormade, that’s it.

  42. Golferguy

    May 23, 2017 at 9:21 am

    I would’ve loved to see these clubs dressed up in plain steel, a la Srixon, Mizuno, etc. Going forward, I’m considering a set of Miura clubs if I choose to go high-end, though my Mizuno sticks are working for me really well.

  43. Tyson Rochambeau

    May 23, 2017 at 9:17 am

    High end? They look like a set from Wal-Mart.

  44. J C

    May 23, 2017 at 9:14 am

    Those of you who are saying these are ugly you need to seem them in person. The pro’s look great. I would like to know what shafts are available for the hybrids.

  45. DJ

    May 23, 2017 at 8:32 am

    My goodness those are hideous. Callaway making it very hard to become a fan

  46. Teaj

    May 23, 2017 at 8:24 am

    A players iron that looks like a GI iron, I’m not sure the market for players irons wants a busy looking club head, I have been wrong before though. I am sure people will bring up the fact that you do not see the back of the club when at address but there is something to be said about looking at your bag from a far and seeing a nice clean looking set of clubs (my opinion)

    • Steve

      May 23, 2017 at 11:15 am

      The funny thing is I think the market wants the EXACT opposite – GI irons that look like players irons.

  47. Greg V

    May 23, 2017 at 8:24 am

    They look cheap.

  48. LH

    May 23, 2017 at 8:22 am

    Gorgeous. Count me in for Epic Pro

  49. Nath

    May 23, 2017 at 7:51 am

    I really like the shape of the hybrid

  50. Corey

    May 23, 2017 at 7:49 am

    I like Cally, but not gonna sell a whole lot at that price. If your gonna be expensive, you better be pretty.

  51. Desmond

    May 23, 2017 at 7:35 am

    Assume the pics at address and that overly thick topline (reminiscent of the Big Bertha OS) are of the normal Epic, not the Epic Pro.

  52. Duk Koo Kim

    May 23, 2017 at 7:35 am

    +2……..and at 2 grand a set? As the kids used to say, REALLY? Callaway needs to get tossed away!

    And what may I ask is “high end?” What a riot!

  53. Powder skier

    May 23, 2017 at 6:46 am

    Hope they work better then they look uugh

  54. Mr Muira

    May 23, 2017 at 6:32 am

    Fugly.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Top 10 clubs of 2003—inspired by Adam Scott’s Titleist 680 irons

Published

on

As has been well documented, Adam Scott recently won the Genesis Invitational with a set of Titleist 680 blade irons, a design that was originally released in 2003. One of the great benefits of being one of the best players in the world is you don’t need to search eBay to find your preferred set of 17-year-old irons. Titleist has been stocking sets for Mr. Scott—even to the point of doing a limited production run in 2018 where they then released 400 sets for sale to the general public.

A lot of time has passed since 2003, and considering the classic nature of Scott’s Titleist 680, I figured now was a good time to look back at some other iconic clubs released around the same time.

Ping G2 driver

This was Ping’s first 460cc driver with a full shift into titanium head design. The previous Si3 models still utilized the TPU adjustable hosel, and this was considered a big step forward for the Phoenix-based OEM. The driver was a big hit both on tour and at retail—as was the rest of the G2 line that included irons.

TaylorMade RAC LT (first gen) irons

The RAC LTs helped position TaylorMade back among the leaders in the better players iron category. The entire RAC (Relative Amplitude Coefficient) line was built around creating great feeling products that also provided the right amount of forgiveness for the target player. It also included an over-sized iron too. The RAC LT went on to have a second-generation version, but the original LTs are worthy of “classic” status.

TaylorMade R580 XD driver

Honestly, how could we not mention the TaylorMade R580 XD driver? TM took some of the most popular drivers in golf, the R500 series and added extra distance (XD). OK, that might be an oversimplification of what the XD series offered, but with improved shape, increased ball speed outside of the sweet spot, and lower spin, it’s no wonder you can still find these drivers in the bags of golfers at courses and driving ranges everywhere.

Titleist 680MB irons

The great thing about blades is that beyond changing sole designs and shifting the center of gravity, the basic design for a one-piece forged head hasn’t changed that much. For Adam Scott, the 680s are the perfect blend of compact shape, higher CG, and sole profile.

Titleist 983K, E drivers

If you were a “Titleist player,” you had one of these drivers! As one of the last companies to move into the 460cc category, the 983s offered a classic pear shape in a smaller profile. It was so good and so popular, it was considered the benchmark for Titleist drivers for close to the next decade.

Cleveland Launcher 330 driver

It wasn’t that long ago that OEMs were just trying to push driver head size over 300cc, and Cleveland’s first big entry into the category was the Launcher Titanium 330 driver. It didn’t live a long life, but the Launcher 330 was the grandaddy to the Launcher 400, 460, and eventually, the Launcher COMP, which is another club on this list that many golfers will still have fond memories about.

Mizuno MP 33 irons

Although released in the fall of 2002, the Mizuno MP 33 still makes the list because of its staying power. Much like the Titleist 680, this curved muscle blade was a favorite to many tour players, including future world No. 1 Luke Donald. The MP 33 stayed in Mizuno’s lineup for more than four years and was still available for custom orders years after that. Unfortunately, if you are looking for a set now you are going to have to go the used route.

Callaway X-16 irons

The Steelhead X-16 was a big hit at retail for Callaway. It offered greater forgiveness than the previous X-14’s but had a more compact shape with a wider topline to inspire confidence. They featured Callaway’s “Notch” weighting system that moved more mass to the perimeter of the head for higher MOI and improved feel. There was a reduced offset pro series version of the iron, but the X-16 was the one more players gravitated towards. This is another game improvement club for that era that can still be found in a lot of golf bags.

Ben Hogan CFT irons

The Hogan CFTs were at the forefront of multi-material iron technology in 2003. CFT stood for Compression Forged Titanium and allowed engineers to push more mass to the perimeter of the head to boost MOI by using a thin titanium face insert. They had what would be considered stronger lofts at the time sounded really powerful thanks to the thin face insert. If you are looking for a value set of used irons, this is still a great place to start.

King Cobra SZ driver

In 2003, Rickie Fowler was only 15 years old and Cobra was still living under the Acushnet umbrella as Titleist’s game improvement little brother. The Cobra SZ (Sweet Zone, NOT 2020 Speed Zone) was offered in a couple of head sizes to appeal to different players. The thing I will always remember about the original King Cobra SZ is that it came in an offset version to help golfers who generally slice the ball—a design trait that we still see around today.

Your Reaction?
  • 29
  • LEGIT3
  • WOW1
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

Equipment

Today from the Forums: “The importance of wedge fitting”

Published

on

Today from the Forums we delve into a subject dedicated to wedge fitting. Liquid_A_45 wants to know if wedge fitting is as essential for golfers as iron fitting, and our members weigh into the discussion saying why they feel it is just as imperative.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • Z1ggy16: “Super important if you’re a serious golfer. Even better if you can get fit outdoors on real grass and even go into a bunker.”
  • ThunderBuzzworth: “The biggest part of wedge fitting is yardage gapping and sole grinds. If you have a grind that doesn’t interact with the turf in your favor, it can be nightmarish around the greens. When hitting them try a variety of short game shots with different face angles etc. with the different grinds to see which one works best for what you need.”
  • Hawkeye77: “Wedge fitting I had was extremely beneficial when I got my SM6s a few years ago. Mostly for working with the different grinds and how they interacted with my swing and on different shots and having an eye on my swing to help with the process and evaluate the results. My ideas of what grinds were right for me based on researching on Titleist, etc. just were not correct in 2/3 of the wedges I ended up with as far as the grinds were concerned. Good to have an experienced fitter available to answer questions, control variables, etc.”
  • cgasucks: “The better you get at this game, the more important wedges are.”

Entire Thread: “The importance of wedge fitting”

Your Reaction?
  • 3
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Today from the Forums: “Pull cart recommendations?”

Published

on

Today from the Forums we take a look at pull carts currently on the market. Bogeygolfer55 is looking for a quality pull cart for less than $300, and our members have been giving their recommendations in our forums – with Clicgear proving to be a popular option.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • Yuck: “I have had a clicgear 3.5 for nearly four years now. Holding up well with well over 200 rounds on it so far.”
  • Hawkeye77: “I had a Clicgear and liked it a lot, but my daughter “appropriated” it. Came upon an article a year ago about the Blade IP. Ordered one. It folds flat instead of into a cube which I like, and when I take it out it is quicker to get ready to go, and easier to take down. That doesn’t mean the Clicgear was particularly difficult, but it was more involved and 4 pounds heavier – don’t mind pushing a lot less weight.”
  • Celebros: “Another vote for Clicgear. The 4.0 just came out, so you may be able to find some of the 3.5+ models discounted soon.”
  • I_HATE_SNOW: “Sun Mountain user. Tall thin tires roll through the grass the easiest. Ours are old enough that the tires inflated. Once slimed, they stay up all winter. Mesh baskets on the cart are nice for carrying headcovers, water bottles, dog leash, etc.”
  • birddog903: “I’ve had a caddytek lite three-wheel version for a year or so. No complaints and I paid less than $100.”

Entire Thread: “Pull cart recommendations?”

 

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending