Equipment
Behind the scenes at Bettinardi Golf HQ
In a business driven by narratives, Bettinardi Golf is strong in its distinctions: innovators, craftsmen, artists. Of course, winning helps, too.
Bettinardi has cemented itself among putter-maker elites with unique designs that have been validated by the best golfers in the world in the form of major championship wins and dozens of other PGA Tour victories. With its recent releases, as well as through its custom putters, Bettinardi has also flexed its artistic muscles.
Maybe just as important to the company’s steady growth in the golf equipment industry over the past two decades, however, is something as simple as where Bettinardi putters are made. Bob Bettinardi’s office is 25 feet from his manufacturing floor. His son Sam’s office, located on the other side of the building, is a few feet closer.
Spend the day at the company’s Tinley Park, Illinois, headquarters with the Bettinardi’s and you’ll know what it’s like to be fully committed to something. Yes, both father and son share a special passion for the game of golf. What became clear, however, was that the stick-and-ball game is an outlet for an even stronger passion. The Bettinardis are obsessive about quality.
Remarkable attention to detail is the running theme around Bettinardi HQ, whether the company is making a retail putter or a completely custom model. Both are produced with the same CNC milling machines and engraving tools, and undergo the same multiple-point, model-specific inspections. And if golfers do decide to go the completely custom route, they can trust that their putter will be made by the same people who make putters for Matt Kuchar, Fred Couples, Brian Gay and Jim Herman.
Learn more about Bettinardi Golf in the photos below.
Two putters, one block of steel
These two Bettinardi Studio Stock #6 putters were milled from a block of mild carbon steel that looked just like the one underneath them.
It was Bob Bettinardi’s belief when he started his putter business in the early 1990s that the CNC milling procedures he was using to create products for the Department of Defense, as well as the telecommunication and the medical industry, would create putters that were superior to what was available at the time. Now, CNC milling is standard procedure for premium putters.
Tighter Tolerances
Bettinardi’s CNC milling and engraving processes lead to putters with extremely tight tolerances, which is why every Bettinardi lists its putter head weights to the gram. For reference, a gram is approximately the weight of one paper clip.
The Tour Stock BB Zero pictured above weighs exactly 351.5 grams, falling within the company’s 2-gram tolerance.
The Manufacturing Floor
This photo shows roughly one-quarter of Bettinardi’s manufacturing floor. No other facility produces Bettinardi putters, giving the company complete over its manufacturing and assembly. The only step the company outsources is plating, which is done in California, making Bettinardi putter heads 100 percent made-in-the-U.S.A products.
A Do-Anything Custom Department
Let’s say you shot a duck on a family hunting trip with a 20-gauge shotgun.
Let’s also say it was a special duck wearing what’s called a “duck band,” trackers that support waterfowl conservation efforts. Wanting to remember the moment, you had the idea to send the tag to Bettinardi and have it used in a putter design. Maybe the tag could fill the cavity of a custom BB8 DASS (Double Age Stainless Steel) putter, you thought?
The Bettinardi Custom Team could design a putter to perfectly accomodate the tag, and add your name as well as the gun you used to bring down the bird… and yes, the Bettinardi Custom Team actually did this.
Seriously, Bettinardi will do almost anything
Here’s a putter Bettinardi was designing for a multiple-time PGA Tour winner, who requested a welded-neck putter in the style shown on the CAD screen. Bettinardi doesn’t currently make such a putter shape, so it had to design one from scratch.
Multi-piece Bettinardis
Recent mallets from Bettinardi, including the Inovai 3.0 shown above, are created from two pieces: steel and aluminum. Since steel (right) is much heavier than aluminum (left), the steel is used to position weight in the back of the putter to improve moment of inertia (MOI), a measure of a putter’s forgiveness.
Each of the pieces is 100 percent milled, and then secured together with specially design screws.
How much heavier steel is than aluminum
These blocks are different sizes, but they weigh the same amount. Can you guess which one is aluminum and which one is steel?
Engraving the BB Series
See that green stuff in the cavity of the BB Series putter on the right? It’s necessary to cool down the metal during the engraving process.
Prototype Alert
If you’re been holding out for an adjustable weight putter from Bettinardi, you might finally be able to pull the trigger on such a model in 2016. Here’s a prototype I spotted at HQ with Bettinardi’s F.I.T. Face, which is the softest-feeling of the company’s three face-milling patterns. The other two patterns, FlyMill and HoneyComb, offer slightly firmer feels, with HoneyComb being the firmest.
Matt Kuchar’s next putter?
Speaking of prototypes, here’s an Inovai 3.0 Arm Lock that was designed for Matt Kuchar.
Related
- Bettinardi launches new BB Series, unveils Inovai 3.0
- Bettinardi releases 10 new putters for 2015
- 10 awesome photos from Bettinardi’s 2015 Summer Social
- LIKE154
- LEGIT20
- WOW12
- LOL3
- IDHT4
- FLOP3
- OB5
- SHANK9
Whats in the Bag
Steve Stricker WITB 2024 (April)
- Steve Stricker WITB accurate as of the Zurich Classic. More photos from the event here.
Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X
3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX
Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X
Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5
Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore
Putter: Odyssey White Hot No. 2
Ball: Titleist Pro V1x
Grips: Golf Pride Tour Velvet Grip Rite
Check out more in-hand photos of Steve Stricker’s clubs here.
- LIKE5
- LEGIT0
- WOW0
- LOL0
- IDHT1
- FLOP0
- OB0
- SHANK0
Whats in the Bag
Alex Fitzpatrick WITB 2024 (April)
- Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X
Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX
Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)
Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X
Putter: Bettinardi SS16 Dass
Grips: Golf Pride MCC
Check out more in-hand photos of Alex Fitzpatrick’s clubs here.
- LIKE2
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss
In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
- driveandputtmachine: “Still playing a MIni 300. The head was only 208, so I ordered a heavier weight and play it at 3 wood length. I am playing a Ventus Red 70. I play 70 grams in my fairways. I use it mainly to hit draws off the tee. When I combine me, a driver, and trying to hit a draw it does not work out well most of the time. So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck. The 300 Mini is very good off the deck.”
- JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”
Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”
- LIKE3
- LEGIT1
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK4
-
19th Hole2 weeks ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole4 days ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole2 weeks ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole4 days ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole1 week ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole2 weeks ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole1 week ago
Brandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
Pingback: Behind the scenes at Bettinardi Golf
nunya
Dec 31, 2015 at 6:24 pm
That inovai arm lock should be retail.
Chuck
Dec 30, 2015 at 9:36 pm
Somebody explain to me what a BBO model is. I have seen it in all different shapes and styles
don
Dec 30, 2015 at 8:21 pm
Why do the comments keep disappearing?
Zak Kozuchowski
Dec 30, 2015 at 10:01 pm
The comments removed from this story were either personal attacks or purposely inflammatory posts that are not allowed by our rules and terms: http://www.golfwrx.com/forums/?app=forums&module=extras§ion=boardrules
Poppa
Dec 30, 2015 at 11:46 pm
It’s against the rules to say that you should bring straight cash for a better deal? Lmao
shimmy
Dec 31, 2015 at 12:55 am
Do consumers not need to be made aware that Bettinardi Putters uses an illegitimate quote (about an inflammatory issue) from our first President to sell his headcovers? If Bettinardi is going to use ‘patriotism’ to sell goods then might they please be true patriots and use Washington’s words accurately? This is too important to let slide.
Unknown
Dec 31, 2015 at 12:20 pm
Agree with you. Just make putters Bob. We don’t need to hear how you feel about issues.
John Goss
Dec 29, 2015 at 9:50 pm
Scotty used to be the best and has been eclipsed by Bettinardi classic styles and quality. Play the bb32 now and have never putter better. Keep up the great work!!