Connect with us

Opinion & Analysis

Callaway R&D Director on the XR irons, 360 Face Cup

Published

on

Scott Manwaring, Callaway’s director of R&D for irons, hybrids and wedges, has been with the company for nearly two decades, and he’s worked in club design since the mid-2000s. He’s seen a lot in his time at the Carlsbad-based company, which under the direction of CEO Chip Brewer, is putting product front-and-center, according to the R&D specialist.

The company’s latest product to stand front and center: Callaway’s XR and XR Pro irons with Callaway’s Face Cup 360 technology.

Manwaring, who graduated from Brigham Young University with a degree in mechanical engineering, said he was incredibly proud of the new XR and XR Pro irons, which were the focus of our conversation.

Note: Topics in bold with Manwaring’s replies beneath

Callaway’s primary focus, how it influences product

The broad umbrella changed with Chip coming here. He said, “Be proud of the product that you’re creating.” Before, it was a lot more nuanced and complicated.

Chip is driven on the product front. Callaway spends more than $30 million per year in R&D, so that philosophy comes from Chip himself: Be proud of it. Drive every last detail, do it as quickly as possible.

2Y9G5183-600x400

Callaway’s X Hot Pro fairway wood from 2013

That has to drive its way into every category. With the X Hot fairway wood, we took it all the way to the finish line. The next year, we said, “Let’s get the hybrids.” This was the first year that that mantra really hit irons. I obviously had a lot going on, and we’re trying to change a lot of products, but you can only turn a boat so fast; this is the first year we said, “Let’s really drive it home in irons.”

Developing the XR Irons

9acdda6f7ca9bef457a15a35e017aecd

Callaway’s XR irons sell for $799 (steel).

On the Apex iron, where your COGs are a lot higher, it’s easier to fix that one. When you get down to the $799 category, you have to think a lot harder about every nickel you spend and why you spend it to give the consumer the best value and also make a product you’re proud of. That just takes a little more time and effort.

Just to give you a perspective of what a pain in the a** this iron was to make: We did eight prototyping iterations with the suppliers alone — You know, get the part back, test it, change it. That is at least five or six more than we would normally do. That doesn’t even count internally. We did about four or five…using our own machines.

Addressing concerns about hot spots

We were aware of the complaint. From our position, a common complaint is just an opportunity to do something completely different and completely out of the box.

You have this opportunity with Chip coming on board and saying, “Do something different…do something that you’re proud of. Do something that’s harder.”

You have this great opportunity to break the problem up and really dig into every detail…and think in different ways to tackle all those items.

An overview of Cup 360 technology

Talking about the 360 cup face: By separating an iron into two pieces, you inherently increase the complexity and the cost. And when you weld two similar materials, it’s kind of counter-intuitive. But we needed to cast the face independently because we needed control of every…point on the back of the face.

We needed to control the thickness at every location to avoid changes in thickness that create hotspots.

You’re seeing a lot of companies take the easier solution and not keep the CG in the optimal spot, because they know they need to control face. And you see them taking the simple solution and not worrying about the thickness.

You’re still using the same FEA tools and all the stuff you’ve used in the past, but when you do things like this…when you’re trying to get the distance, plus maintain consistency, your material properties become way more critical. So all your analysis tools start to struggle. You pick up failure modes that are somewhat unexpected.

I think one aspect that’s kind of lost on everybody here is when we did the face cups on the fairway woods and the hybrids, you had this eggshell principle going on where it was a closed-back system…it was naturally stronger and thicker.

4b7f22f95f477fcfe4f86ff0f979a2151

Callaway’s X2 Hot and X2 Hot Hybrids (2014) brought the company’s face cup technology to hybrids, giving them the 455 carpenter steel faces used on the 2013 X Hot fairway woods.

On a cavity back iron, when you open up the back of that iron, you’re now on a way more flexible system. Dealing with your durability requirements and your strength requirements is a lot more complicated. And when you overlay the cost…you’ve got a real problem.

The face cup, it’s just as critical as the body. When you separate the face cup…it allows you to minimize your hotspots, especially when you cast it, because then you don’t have any machining marks, you’re not dealing with forging or some of the inherent problems that come there with draft analysis and some of the complexity there…and the cost.

The COR testing becomes obvious. You put that cup face on there and your COR gains across the face are just incredible. So the face cup is critical, but then you’ve got to move to the body. The second you…pull the mass away from the face…your center of gravity just climbs immediately…and then you’ve washed out all the gains. So, step two is finding a body design that when all that energy is transferred off the face, it doesn’t die.

The XR Pro

1440bc750d11d5d8936d6a2e38953830

Callaway’s XR Pro irons sell for $899 (steel).

On the Pro, we wanted to not offend PGA Tour players with the thicker top line. Getting that just right—where it still has the durability and still has the ball speed and still has the COR numbers we were interested in, and it still has the CG and can carry the load—it was a challenge.

Your thickness on that top line: As you get that face to transfer energy more efficiently to the ball and ultimately also to the body…it becomes a trampoline. And if you wanted the metal rims around the trampoline to be thinner, the person jumping on it is still transferring the same load, and if you start thinning those rims down too much, they just give out.

3a7a240c84ba347daceebfb7a1024d44

The XR Pro (left) has less offset and a thinner top line than the XR irons.

So, the Pro iron is an incredible club…some better players hit the Pro farther than they do the standard [XR]. When I was looking at the COR data, I originally thought it was just the offset and they were able to swing at it more aggressively. But…we did a damn good job…it’s incredibly efficient for its face area.

A walkthrough of Callaway’s 2015 irons

With Big Bertha, it’s just “how can we help you?” We’re doing everything we can to help you enjoy the round of golf. We’re going to help you get the ball to fly far. You’re going to have a lot of hybrids in your bag.

025f77bdeb277680478634d6e738fd58

Callaway’s Big Bertha irons ($999)

With the XR, we intentionally designed stuff in there to help the average golfer that we knew the better player would snub their nose at. But with the XR Pro, Chip said: “You’re not allowed to skimp on the technology.”

In creating the XR Pro, we took everything we learned from the XR—because we did that first—and applied those lessons to the XR Pro in a shape that we knew wouldn’t offend, and it ended up doing really, really well.

The XR is for the center-of-the-green player. The player who isn’t going to work the ball, who just wants to check the yardage and hit it. But in order to help that player along, it requires a certain offset, a certain top line thickness, a sole width to help with turf interaction, a little more MOI. The XR is for that weekend guy that’s out there quite a bit.

a7ba3665707634662ff978e6af123a4e

At Address: Callaway’s XR Pro (left) and Apex irons.

The XR Pro…was really going after someone who really likes his Apex irons but would like a little more control. We kind of kept the offset; we narrowed the top line back down. We brought the sole width back down…and this is a guy we see wanting to be a pin-seeker, wanting to really go after it…he’s going to be disappointed if he didn’t pull the shot off. So the MOI is a little lower, the top line is a little thinner. The Pro is for someone who I think is truly passionate about their game.

Your Reaction?
  • 112
  • LEGIT10
  • WOW9
  • LOL4
  • IDHT6
  • FLOP10
  • OB7
  • SHANK14

GolfWRX Editor-in-Chief

28 Comments

28 Comments

  1. t golf

    Mar 3, 2015 at 8:30 am

    How much different are these than something like the speedblades? Those have little off set for a GI and pound the ball. Straight too.

  2. Vito

    Mar 1, 2015 at 1:19 pm

    Just ordered my XR Pro and Apex MB combo set. Now if the snow will just allow me to use them…

  3. Jeff

    Feb 24, 2015 at 5:24 pm

    Oh great, now I have to throw out my Apex Pros. The marketing on these new iron sets leaves the guys who bought last year’s sales pitch hung out to dry. Basically, last year’s 1200 dollar set is obsolete, because, you know, face cups and stuff. High CT, face cups, progressive this, channel slot that. I hope the garbage man takes my Apex Pros without charging me extra.

    • killerbgolfer

      Feb 24, 2015 at 10:16 pm

      I hope not, i just got the Apex forged! I don’t see these really threatening the forged offerings. Until there’s new forged offerings…

      • Ol deadeye

        Feb 25, 2015 at 11:29 am

        Well, keeping in mind that the USGA limits the COR of all club faces, I took my 20 yr old daughter(12 handicap) to a big box store. We compared her shots with her Ping G20 seven iron (steel R shaft) and both Taylormade RSi 1 and Callaway XR seven irons. Distance increase? About one or two yards with either club. With both steel or graphite shaft. She preferred the steel shafts. These were 85 grams and Ping steel is about 100. She preferred the impact feel and swing weight of the Taylormade. Enough there to replace her clubs? Not in our opinions.

  4. Ol deadeye

    Feb 23, 2015 at 2:04 pm

    It would seem that the players most interested in distance with irons would be the better women players. Not granny who retired and took up golf at 65. Younger women who hit an eight iron 110 yards. If the shaft is about the same length but flies the ball ten yards further that would be a game changer.

  5. Roosterredneck

    Feb 23, 2015 at 1:12 pm

    The 360 club design is not new. Macgregor did this years ago.Yes the thick top line and off set is excessive for me .. Buy a Macgregor model it should be much cheaper.

  6. Teaj

    Feb 20, 2015 at 3:37 pm

    These things get out there, stronger then your traditional lofts yes but if your looking for a little extra distance with forgiveness and less offset these might fit the bill. They go a little to far for me as I don’t really need to hit my clubs farther but the forgiveness with less offset is something to think about for players not playing as much as they used to but still don’t need offset. Go try it before you knock it, for the right person these would be a great club.

  7. Person

    Feb 20, 2015 at 11:52 am

    What throws me off about those irons is how round the topline looks from address. Also yes they look just a little too thick for my tastes.

  8. Vincent

    Feb 20, 2015 at 10:45 am

    Callaway could forget the “Big Bertha” trademark. This is a cannon built and used by the German army against Belgian and French soldiers and fortresses during the First World War. What could we think about a golf club named Kalashnikov?

    • graymulligan

      Feb 22, 2015 at 7:26 pm

      If you asked most folks at this point, especially golfers, they would equate the Big Bertha name to the clubs, and not the cannon. It might be a couple decades too late to have this conversation.

  9. gwillis7

    Feb 20, 2015 at 10:36 am

    Very interesting article. Haven’t had a ton of Callaway gear in the past, but did have the x-hot driver and that thing was a beast. Last couple years they def have made huge strides in woods

  10. Dave S

    Feb 20, 2015 at 9:15 am

    This probably isn’t the forum to post this, but looking at the top-line pics of these irons, it really struck me. I’ve always struggled with the large off-set that typically exists in a true GI iron. My natural shot shape with irons is right to left, with my miss usually being a hook. I’m not a great player by any stretch (14 hcp) and I’ve been playing the Adams CMBs for three seasons now. I’ve always been a naturally good athlete, but I really don’t play enough to get great at golf (every other weekend in the spring and summer), so I think GI irons could help. BUT, they all have that huge off-set, which with my natural in-to-out swing path, would likely exacerbate my hook. I guess these OEMs have to make a product that fits the majority of mid-high handicappers and their miss is usually left to right… I’m kind of in a weird spot.

    • Jeff

      Feb 24, 2015 at 5:19 pm

      Dave, players cavity backs. Less offset, more forgiveness.

  11. CHRIS

    Feb 20, 2015 at 8:40 am

    Looks like tennis rackets to me, both of them. I just cannot bear to look down and see a topline like that.

    • Rich

      Feb 20, 2015 at 9:11 am

      Keep playing your blades mate. I’ll take your money with a set of XR pros thanks.

      • Mike

        Feb 20, 2015 at 9:24 am

        Rich you know if you don’t use blades you’re a loser! 🙂 Which I guess I am since I just took delivery of my XR Pros.

        • Rich

          Feb 20, 2015 at 5:14 pm

          Yep, I know what you mean Mike. Happy to be a loser. Can’t wait to try the XR pro’s, they look pretty good to me. Happy for all the help I can get these days.

      • Philip

        Feb 20, 2015 at 2:29 pm

        Maybe, maybe not – if the guy doesn’t like the look than so what? By the way, I don’t like them too, but whether one plays blades or XR Pros is irrelevant to whether they’ll beat someone else in a match. I’ve played both with players using blades and players using clubs like the XP Pros and the deciding factor of their game has NOTHING to do with what type of iron they play, but whether they know their true yardages and whether they know their weaknesses and play accordingly.

        • Rich

          Feb 20, 2015 at 5:08 pm

          Easy there tiger. Just poking a bit of fun. I love blades and have several sets but don’t play them much anymore because my game is not what it used to be. All power to those that can.

  12. XR is King

    Feb 19, 2015 at 10:59 pm

    The XR irons are going to blow everybody away!!!!! Awesome!!!!

  13. Cyd

    Feb 19, 2015 at 10:30 pm

    Hit the Pro model further???? Difference in lofts maybe?

  14. Cyd

    Feb 19, 2015 at 10:29 pm

    Hit the Pro further???? Difference in lofts?

    I have a new set of irons for the masses. Guaranteed to add 15 more yards. Of course the lofts are 2* stronger than the previous model so now your 7 Iron is what used to be a 5 iron, the PW is what used to be an 8 iron, so on and so forth.

    But by golly I can hit a 8 Iron 190 or more and Hogan or Nicklaus could never do that.

    • Tom

      Feb 20, 2015 at 4:17 pm

      Pro is +1* on lofts (weaker) and shorter in length in the long irons (3-6) than the plain XR also lie angles are different between the models.

      And yes lofts are stronger than in the 60’s or 70’s but when I can get a 7i launching at over 20* why should I care? As to added length, hey 4 wedges is fine in the bag. (Really only 2 or 3 using old lofts.) So long as my misses are closer in results to solid hits.

      BTW: Jack could do that. He choose not to most of the time. I remember him being in trouble at Firestone once and hitting a VERY long 8i. But then that was with far worse equipment esp. balls than today!

  15. Steve

    Feb 19, 2015 at 7:33 pm

    Xhot line with different colors

    • LMB

      Feb 19, 2015 at 10:24 pm

      I’d say that was true for X2 Hot irons but these have legit tech updates.

  16. Tom

    Feb 19, 2015 at 7:11 pm

    Both the XR and XR Pro swing very nice. (With proper fit.) I get my XR Pro irons next week, my pro e-mailed me they got in and would be available at my lesson on Tue. I’ve been hitting the demo iron and LOVE how it feels/swings, the feed back, and how consistent yardage is between center and off center hits. Callaway was not on my radar when I went to get new irons but these just blew me away! 🙂

  17. LMB

    Feb 19, 2015 at 6:36 pm

    Sounds like they made the XR first, and then figured out how to make a better version of it when they did the XR Pro…

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

19th Hole

Vincenzi’s LIV Golf Singapore betting preview: Course specialist ready to thrive once again

Published

on

After another strong showing in Australia, LIV Golf will head to Sentosa Golf Club in Singapore looking to build off of what was undoubtedly their best event to date.

Sentosa Golf Club sits on the southern tip of Singapore and is one of the most beautiful courses in the world. The course is more than just incredible scenically; it was also rated 55th in Golf Digest’s top-100 courses in 2022-2023 and has been consistently regarded as one of the best courses in Asia. Prior to being part of the LIV rotation, the course hosted the Singapore Open every year since 2005.

Sentosa Golf Club is a par 71 measuring 7,406 yards. The course will require precise ball striking and some length off the tee. It’s possible to go low due to the pristine conditions, but there are also plenty of hazards and difficult spots on the course that can bring double bogey into play in a hurry. The Bermudagrass greens are perfectly manicured, and the course has spent millions on the sub-air system to keep the greens rolling fast. I spoke to Asian Tour player, Travis Smyth, who described the greens as “the best [he’s] ever played.”

Davis Love III, who competed in a Singapore Open in 2019, also gushed over the condition of the golf course.

“I love the greens. They are fabulous,” the 21-time PGA Tour winner said.

Love III also spoke about other aspects of the golf course.

“The greens are great; the fairways are perfect. It is a wonderful course, and it’s tricky off the tee.”

“It’s a long golf course, and you get some long iron shots. It takes somebody hitting it great to hit every green even though they are big.”

As Love III said, the course can be difficult off the tee due to the length of the course and the trouble looming around every corner. It will take a terrific ball striking week to win at Sentosa Golf Club.

In his pre-tournament press conference last season, Phil Mickelson echoed many of the same sentiments.

“To play Sentosa effectively, you’re going to have a lot of shots from 160 to 210, a lot of full 6-, 7-, 8-iron shots, and you need to hit those really well and you need to drive the ball well.”

Golfers who excel from tee to green and can dial in their longer irons will have a massive advantage this week.

Stat Leaders at LIV Golf Adelaide:

Fairways Hit

1.) Louis Oosthuizen

2.) Anirban Lahiri

3.) Jon Rahm

4.) Brendan Steele

5.) Cameron Tringale

Greens in Regulation

1.) Brooks Koepka

2.) Brendan Steele

3.) Dean Burmester

4.) Cameron Tringale

5.) Anirban Lahiri

Birdies Made

1.) Brendan Steele

2.) Dean Burmester

3.) Thomas Pieters

4.) Patrick Reed

5.) Carlos Ortiz

LIV Golf Individual Standings:

1.) Joaquin Niemann

2.) Jon Rahm

3.) Dean Burmester

4.) Louis Oosthuizen

5.) Abraham Ancer

LIV Golf Team Standings:

1.) Crushers

2.) Legion XIII

3.) Torque

4.) Stinger GC

5.) Ripper GC

LIV Golf Singapore Picks

Sergio Garcia +3000 (DraftKings)

Sergio Garcia is no stranger to Sentosa Golf Club. The Spaniard won the Singapore Open in 2018 by five strokes and lost in a playoff at LIV Singapore last year to scorching hot Talor Gooch. Looking at the course setup, it’s no surprise that a player like Sergio has played incredible golf here. He’s long off the tee and is one of the better long iron players in the world when he’s in form. Garcia is also statistically a much better putter on Bermudagrass than he is on other putting surfaces. He’s putt extremely well on Sentosa’s incredibly pure green complexes.

This season, Garcia has two runner-up finishes, both of them being playoff losses. Both El Camaleon and Doral are courses he’s had success at in his career. The Spaniard is a player who plays well at his tracks, and Sentosa is one of them. I believe Sergio will get himself in the mix this week. Hopefully the third time is a charm in Singapore.

Paul Casey +3300 (FanDuel)

Paul Casey is in the midst of one of his best seasons in the five years or so. The results recently have been up and down, but he’s shown that when he’s on a golf course that suits his game, he’s amongst the contenders.

This season, Casey has finishes of T5 (LIV Las Vegas), T2 (LIV Hong Kong), and a 6th at the Singapore Classic on the DP World Tour. At his best, the Englishman is one of the best long iron players in the world, which makes him a strong fit for Sentosa. Despite being in poor form last season, he was able to fire a Sunday 63, which shows he can low here at the course.

It’s been three years since Casey has won a tournament (Omega Dubai Desert Classic in 2021), but he’s been one of the top players on LIV this season and I think he can get it done at some point this season.

Mito Pereira +5000 (Bet365)

Since Mito Pereira’s unfortunate demise at the 2022 PGA Championship, he’s been extremely inconsistent. However, over the past few months, the Chilean has played well on the International Series as well as his most recent LIV start. Mito finished 8th at LIV Adelaide, which was his best LIV finish this season.

Last year, Pereira finished 5th at LIV Singapore, shooting fantastic rounds of 67-66-66. It makes sense why Mito would like Sentosa, as preeminent ball strikers tend to rise to the challenge of the golf course. He’s a great long iron player who is long and straight off the tee.

Mito has some experience playing in Asia and is one of the most talented players on LIV who’s yet to get in the winner’s circle. I have questions about whether or not he can come through once in contention, but if he gets there, I’m happy to roll the dice.

Andy Ogletree +15000 (DraftKings)

Andy Ogletree is a player I expected to have a strong 2024 but struggled early in his first full season on LIV. After failing to crack the top-25 in any LIV event this year, the former U.S. Amateur champion finally figured things out, finished in a tie for 3rd at LIV Adelaide.

Ogletree should be incredible comfortable playing in Singapore. He won the International Series Qatar last year and finished T3 at the International Series Singapore. The 26-year-old was arguably the best player on the Asian Tour in 2023 and has been fantastic in the continent over the past 18 months.

If Ogletree has indeed found form, he looks to be an amazing value at triple-digit odds.

Your Reaction?
  • 3
  • LEGIT3
  • WOW1
  • LOL2
  • IDHT0
  • FLOP2
  • OB0
  • SHANK0

Continue Reading

Opinion & Analysis

Ryan: Lessons from the worst golf instructor in America

Published

on

In Tampa, there is a golf course that boasts carts that do not work, a water range, and a group of players none of which have any chance to break 80. The course is overseen by a staff of crusty men who have succeeded at nothing in life but ending up at the worst-run course in America. However, this place is no failure. With several other local courses going out of business — and boasting outstanding greens — the place is booked full.

While I came for the great greens, I stayed to watch our resident instructor; a poor-tempered, method teacher who caters to the hopeless. At first, it was simply hilarious. However, after months of listening and watching, something clicked. I realized I had a front-row seat to the worst golf instructor in America.

Here are some of my key takeaways.

Method Teacher

It is widely accepted that there are three types of golf instructors: system teachers, non-system teachers, and method teachers. Method teachers prescribe the same antidote for each student based on a preamble which teachers can learn in a couple day certification.

Method teaching allows anyone to be certified. This process caters to the lowest caliber instructor, creating the illusion of competency. This empowers these underqualified instructors with the moniker of “certified” to prey on the innocent and uninformed.

The Cult of Stack and Jilt

The Stack and Tilt website proudly boasts, “A golfer swings his hands inward in the backswing as opposed to straight back to 1) create power, similar to a field goal kicker moving his leg in an arc and 2) to promote a swing that is in-to-out, which produces a draw (and eliminates a slice).”

Now, let me tell you something, there is this law of the universe which says “energy can either be created or destroyed,” so either these guys are defying physics or they have no idea what they are taking about. Further, the idea that the first move of the backswing determines impact is conjecture with a splash of utter fantasy.

These are the pontifications of a method — a set of prescriptions applied to everyone with the hope of some success through the placebo effect. It is one thing for a naive student to believe, for a golf instructor to drink and then dispel this Kool-Aid is malpractice.

Fooled by Randomness

In flipping a coin, or even a March Madness bet, there is a 50-50 chance of success. In golf, especially for new players, results are asymmetric. Simply put: Anything can happen. The problem is that when bad instructors work with high handicappers, each and every shot gets its own diagnosis and prescription. Soon the student is overwhelmed.

Now here’s the sinister thing: The overwhelming information is by design. In this case, the coach is not trying to make you better, they are trying to make you reliant on them for information. A quasi Stockholm syndrome of codependency.

Practice

One of the most important scientists of the 20th century was Ivan Pavlov. As you might recall, he found that animals, including humans, could be conditioned into biological responses. In golf, the idea of practice has made millions of hackers salivate that they are one lesson or practice session from “the secret.”

Sunk Cost

The idea for the worst golf instructor is to create control and dependency so that clients ignore the sunk cost of not getting better. Instead, they are held hostage by the idea that they are one lesson or tip away from unlocking their potential.

Cliches

Cliches have the effect of terminating thoughts. However, they are the weapon of choice for this instructor. Add some hyperbole and students actually get no information. As a result, these players couldn’t play golf. When they did, they had no real scheme. With no idea what they are doing, they would descend into a spiral of no idea what to do, bad results, lower confidence, and running back to the lesson tee from more cliches.

The fact is that poor instruction is about conditioning players to become reliant members of your cult. To take away autonomy. To use practice as a form of control. To sell more golf lessons not by making people better but through the guise that without the teacher, the student can never reach their full potential. All under the umbrella of being “certified” (in a 2-day course!) and a melee of cliches.

This of course is not just happening at my muni but is a systemic problem around the country and around the world, the consequences of which are giving people a great reason to stop playing golf. But hey, at least it’s selling a lot of golf balls…

Your Reaction?
  • 17
  • LEGIT2
  • WOW0
  • LOL4
  • IDHT1
  • FLOP1
  • OB0
  • SHANK19

Continue Reading

19th Hole

Vincenzi’s 2024 Zurich Classic of New Orleans betting preview

Published

on

The PGA TOUR heads to New Orleans to play the 2023 Zurich Classic of New Orleans. In a welcome change from the usual stroke play, the Zurich Classic is a team event. On Thursday and Saturday, the teams play best ball, and on Friday and Sunday the teams play alternate shot.

TPC Louisiana is a par 72 that measures 7,425 yards. The course features some short par 4s and plenty of water and bunkers, which makes for a lot of exciting risk/reward scenarios for competitors. Pete Dye designed the course in 2004 specifically for the Zurich Classic, although the event didn’t make its debut until 2007 because of Hurricane Katrina.

Coming off of the Masters and a signature event in consecutive weeks, the field this week is a step down, and understandably so. Many of the world’s top players will be using this time to rest after a busy stretch.

However, there are some interesting teams this season with some stars making surprise appearances in the team event. Some notable teams include Patrick Cantlay and Xander Schauffele, Rory McIlroy and Shane Lowry, Collin Morikawa and Kurt Kitayama, Will Zalatoris and Sahith Theegala as well as a few Canadian teams, Nick Taylor and Adam Hadwin and Taylor Pendrith and Corey Conners.

Past Winners at TPC Louisiana

  • 2023: Riley/Hardy (-30)
  • 2022: Cantlay/Schauffele (-29)
  • 2021: Leishman/Smith (-20)
  • 2019: Palmer/Rahm (-26)
  • 2018: Horschel/Piercy (-22)
  • 2017: Blixt/Smith (-27)

2024 Zurich Classic of New Orleans Picks

Tom Hoge/Maverick McNealy +2500 (DraftKings)

Tom Hoge is coming off of a solid T18 finish at the RBC Heritage and finished T13 at last year’s Zurich Classic alongside Harris English.

This season, Hoge is having one of his best years on Tour in terms of Strokes Gained: Approach. In his last 24 rounds, the only player to top him on the category is Scottie Scheffler. Hoge has been solid on Pete Dye designs, ranking 28th in the field over his past 36 rounds.

McNealy is also having a solid season. He’s finished T6 at the Waste Management Phoenix Open and T9 at the PLAYERS Championship. He recently started working with world renowned swing coach, Butch Harmon, and its seemingly paid dividends in 2024.

Keith Mitchell/Joel Dahmen +4000 (DraftKings)

Keith Mitchell is having a fantastic season, finishing in the top-20 of five of his past seven starts on Tour. Most recently, Mitchell finished T14 at the Valero Texas Open and gained a whopping 6.0 strokes off the tee. He finished 6th at last year’s Zurich Classic.

Joel Dahmen is having a resurgent year and has been dialed in with his irons. He also has a T11 finish at the PLAYERS Championship at TPC Sawgrass which is another Pete Dye track. With Mitchell’s length and Dahmen’s ability to put it close with his short irons, the Mitchell/Dahmen combination will be dangerous this week.

Taylor Moore/Matt NeSmith +6500 (DraftKings)

Taylor Moore has quickly developed into one of the more consistent players on Tour. He’s finished in the top-20 in three of his past four starts, including a very impressive showing at The Masters, finishing T20. He’s also finished T4 at this event in consecutive seasons alongside Matt NeSmith.

NeSmith isn’t having a great 2024, but has seemed to elevate his game in this format. He finished T26 at Pete Dye’s TPC Sawgrass, which gives the 30-year-old something to build off of. NeSmith is also a great putter on Bermudagrass, which could help elevate Moore’s ball striking prowess.

Your Reaction?
  • 8
  • LEGIT3
  • WOW1
  • LOL1
  • IDHT0
  • FLOP3
  • OB1
  • SHANK2

Continue Reading

WITB

Facebook

Trending