Equipment
Edwin Watts debuts “ARC” club matching
Golf retailer Edwin Watts has announcing the debut of its new “ARC,” a system, which will be released as part of the company’s Clubsmarts Report and provide golfers with a matrix that will help them find the club that best matches their particular needs.
The ARC system is the results of robot testing, conducted to try and help golfers find clubs that suit them. Edwin Watts has tested most of the big name drivers in a variety of categories and posted the results on its site (http://www.edwinwattsgolf.com/ARC.aspx) in order to show golfers unbiased results of club testing, which can be viewed free of charge.
Unbiased club testing is a pretty important tool in 2013, because manufacturers have been bery aggressive in their marketing strategies, hoping to convince golfers that new products are considerably better than previous models.
That is not to say that Edwin Watts’ system is perfect, because it is not. Most golfers don’t swing clubs like robots do, although I imagine the results might be appreciated by someone like say, Martin Kaymer, who might actually be a robot. And some golfers aren’t going to be fit into stock-length clubs, or stock-shafted clubs. But it will be a good starting point for many golfers to begin their testing. Furthermore, Edwin Watts doesn’t suggest you buy clubs based on this test, only that you use it as a guide for further testing based on your swing/impact type.

So what does the ARC club matching system reveal? Well, it shows a list of top-three performers for various categories, further subdivided by the type of contact made by the golfer (in this case, a robot). Do you hit most your shots off the toe? If so, maybe you should consider lessons.
But if you believe that lessons are for sissies, you could check the ARC results and see that the Tour Edge Exotics gave the robot the most distance on toe hits. Or you could find out that the RBZ had the highest ball speeds, or that the RBZ Stage 2 was the most accurate in terms of dispersion.
What if you tend to hit your drives thin (low on the face)? Well, if you are looking for distance on thin shots you might want to test the Ping Anser, which also had the fastest ball speed on those shots. So let me put it to you this way: If you hit it thin, just go buy a Ping Anser, OK buddy?
Of course, if you are like me and you hit dead solid perfect basically every time, the robot tells you that the Cleveland Classic is a low-spin bomber, as is the TaylorMade R1. Did I recently want to buy a Cleveland Classic? Yes I did. And now I want to even more, so thanks Edwin Watts!
The tests show results in five different categories: most distance, highest ball speeds, highest launch, most accurate and lowest spin. Those categories are further broken down into as many as six different categories based on where golfers can impact their drivers — high on the face, low on the face, on the toe, heel, sweet spot and an “overall” rating. Using those categories, golfers can pick some clubs to test based on their tendencies and see if they get similar results.
The results also seem pretty unbiased. Why do I say this? I’ll give you two reasons: Wilson and D100.

That club, which we’re yet to see used by anyone on the PGA Tour, was sprinkled all over the test. It ranks in the top three in a lot of the distance and ball speed categories, so much so that I thought for a second that Wilson endorser Padraig Harrington hacked into Edwin Watts website and just started doing stuff.
Would you have tested a Wilson club in your 2013 driver shootout? Put your hand down Kevin Streelman, because we know you would have. Then again, you happily hit your Ping G20 en route to his first Tour win at The Tampa Bay Championship, so maybe not.
While the robot results likely aren’t perfect, golfers would be foolish not to consult the Edwin Watts ARC results before they do their next round of driver testing. There are a lot of club tests out there, but very few that actually rank clubs based on anything not subjective, or that don’t recognize many different clubs with the same award.
Anything that helps golfers filter through the hype and even make an attempt to classify things in an organized matter is OK in my books.

Of course, Edwin Watts’ test doesn’t tell you at what swing speed the robot was set to, and the ARC system has not yet tested 3-woods, hybrids or even irons. But these are things that can be easily be done in the coming months and years. And while my guess is people will demand they provide a bit more details into the settings and results of the ARC tests, the bottom line is they have released information to the public that no one else has, and it’s something that can help the average golfer.
So good for Edwin Watts, good for us, and good for Wilson!
Equipment
Interesting clubs at top of bag – GolfWRXers discuss
In our forums, users are talking about top of bag setups that are non-traditional or thought-provoking in some way. Original poster @SuperSpurs106 inquired about other members who might use unorthodox set-ups to help with gapping issues or weak spots.
They wrote:
“I currently have a PING G430 driver, TM Qi35 3W and a TM Qi4D 7W. Driver and 7W are fine but can’t get on with my 3W and have always struggling with this club over the years. Thinking of adding a 2H which I know would look odd. Just wondering if anyone else had a weird set up at the top of their bag?”
Our members in the forum have offered up their thoughts and personal experiences with non-traditional top of bag set-ups, and their reasoning for thinking outside of the box to begin with. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- BowMain42: “Don’t worry about what “looks” odd. If the club does what you need it to do, it’s the right club.”
- scooterhd2: “I cant hit 3 woods either. Thats why I roll with a unicorn XL Hibore 2 wood. 400 cc head at 16 degrees of loft and its just a monster 3 wood off the tee. Off the deck, we are playing the f6 baffler. 5 wood at 41.75 inches and its easy to control.”
- phizzy30: “I had driver, 3 metal, 2/4 hybrid once upon a time as a higher ss player. 4 hybrid is gone and in place is a driving iron nowadays. I don’t think what you’re proposing is weird in anyway, however the yardage gap might be glaringly huge between driver and 2 hybrid. What is it about your 3 metal that has got you all messed up? You could always go 4 metal with shorter shaft and see if that works.”
Entire Thread: “Interesting clubs at top of bag”
If you aren’t a member, join us in the GolfWRX forums today!
Equipment
Members of the Mini Driver Club – GolfWRXers discuss
In our forums, one user has gone searching for fellow users of a mini driver. In a post, @TightFade asked for other mini driver users to chime in with their weapon of choice, the reason for employing a mini, and what club follows it in the bag.
@TightFade asked:
“What mini are you playing? What spot in the bag did it take over? What’s the next club after it? For me: Elyte mini 13.5. Replacing 3w. Next up club looks like it’ll be 5w.”
Our members in the forum have been sharing their own bag setups featuring the mini driver, and the various reasons they purchased one in the first place. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- RCGA: “Ping G430 Max 12* ‘Thriver.’ Next club is a 4w and 2i (I play a weird course).”
- JMB3: “R7 at 12.75 with Diamana BB 63s. 3w replacement. Next Club: Elyte Ti 5w at 17*.”
- ColdOkieGolf: “R7 15.5 turned down to 13.5 It replaces the 3w. I found it surprisingly easy to hit off the deck, and it’s very rare that I need or want to hit something beyond 250 from the fairway, so next club is my 7w.”
- ChaosTheory: “I’m sub-90 MPH with driver. But I’m able to hit DOD. I have been wanting something like the R7 15.5, so I just ordered one. I have a spot in the bag so nothing has to go. But I could see it replacing my trusty 4 wood, which I never use for approach shots. Just tee shots and lay ups. If I drop the 4 wood, I will turn my 7 wood down to ~20 degrees and will have good gaps. I recently tried a thriver build: 12 degree driver turned to 14, with a heavier 44 inch shaft and added head weight. I hit it great. Very accurate and not overly high, but the problem was that it sometimes went as far as a typical drive. And that’s not what I needed. So I will probably turn the 15.5 up to 16.5 or even 17.5. It’s all theoretical at this point. ?”
Entire Thread: “Members of the Mini Driver Club…Check In.”
If you aren’t a member, join us in the GolfWRX forums today!
Whats in the Bag
Chris Gotterup WITB 2026 (June)
- Chris Gotterup had >14 clubs in his bag when photographed prior to the Memorial Tournament.
Drivers: TaylorMade Qi4D (8 degrees), Ping G440 LST (9 degrees @8), Ping G440 LST (7.5 degrees)
Shafts: Project X HZRDUS Smoke Grey 6.5 TX 70 g, Project X HZRDUS T1100 Handcrafted 6.5 TX 70 g, Project X HZRDUS Smoke Grey 6.5 TX 70 g


Mini driver: TaylorMade BRNR (13.5 degrees)
Shaft: Project X HZRDUS Black TX 80 g

5-wood: TaylorMade Qi4D (18 degrees)
Shaft: Mitsubishi Chemical Diamana WB Wood Shaft 83 TX

7-wood: TaylorMade Qi4D (21 degrees)
Shaft: Mitsubishi Diamana WB Wood Shaft 83 TX

Irons: TaylorMade P770 (3), Bridgestone Tour B 220 MB (4-9)
Shafts: KBS C-Taper 130 X


Wedges: TaylorMade MG5 (46, 52, 56, 60)
Shafts: KBS C-Taper 130 X, True Temper Dynamic Gold Tour Issue X100

Putter: TaylorMade Spider X Tour
Grip: SuperStroke Zenergy Pistol 2.0

Grips: Golf Pride Z Grip Cord
Ball: Bridgestone Tour B X Mindset
Check out more in-hand photos of Chris Gotterup’s clubs here.
-
News3 days agoRussell Henley’s winning WITB: 2026 Charles Schwab Challenge
-
Whats in the Bag2 weeks agoAaron Rai’s winning WITB: 2026 PGA Championship
-
Tour Photo Galleries2 weeks agoPhotos from the 2026 CJ Cup Byron Nelson
-
Equipment12 hours agoDetails on Jason Day’s latest prototype Avoda iron setup
-
Equipment2 weeks agoCJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
-
News6 days agoCharles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
-
Equipment1 week agoDetails on J.J. Spaun’s surprise putter switch
-
Popular Photo Galleries1 week agoPhotos from the 2026 Charles Schwab Challenge

thatsjapanesesfor far
May 1, 2013 at 11:36 am
I appreciate any testing of clubs and i think ewg is less biased than say golf digest since golf digest does get big advertising dollars from the major companies but i love reading their testing also get all the info available and go enjoy the game more, make friends make birdies, make great memories.
Kj
Apr 20, 2013 at 8:23 am
As a data point I think this is great. Bottom line, you have to get fit. The hardest part for some of us is that very few fitting carts have X flex shafts. It becomes a guessing game after that.
BobD
Apr 9, 2013 at 4:07 pm
This relative ranking is next to useless without the associated data. You need to publish the means and standard deviations for each driver in each category as well as the configurations and environmental data for this to be meaningful at all.
Roger Faithfull
Apr 9, 2013 at 1:34 pm
Well done Erwin Watts! A simple visual guide punters can understand. If Wilson has a $100 lower price point…………
Thats called winning market share.
If the TEE works real well, and has a more consistent flexing shaft
in true CPM numbers than this years Callaways (all over the place based on reader reports) then test it out and be Open Minded!
I will bag any brand that works Better Than What I Got Now
and hits More Fairways/Greens in Regulation. 44/45 inch Drivers will help you get Centre Impact…but we all knew that. Cheers.
naflack
Apr 9, 2013 at 12:33 pm
I agree that this very unscientific but a great place to get the ball rolling…
Joe S
Apr 9, 2013 at 12:05 pm
This testing is flawed for sure; And they do need to provide more info. like clubhead speed, AofA, Path, etc. (i.e. full ‘trackman’ data points) and shafts utilized. That said, this is FREAKIN AWESOME. There is so little objective/’scientific data’ out there, I feel this is a big step forward; maybe will help get the ball rolling for more and help us see thru the haze of the manufacturers hype. Robot testing is fine as far as I can see to help establish a base line; particularly as it would relate to ball flight characteristics/spin rates on center /off center hits. I applaud EW for their efforts.
Bill Marshall
Apr 9, 2013 at 9:24 am
You want fitted clubs that work for you,go to a professional club fitter,and not some cut and glue guy.You want the same thing you currently have,clubs that don’t work as described for you,go to an “off the rack” store. Newer version than current heartache,but still a heartache. Bill Marshall, certified level 10 club fitter AGCP,Lakeland Florida
J
Apr 8, 2013 at 8:17 pm
So… The Wilson and the Exotics come with aftermarket real deal shafts.
Not sure, but the comment seemed like a backhanded insult to those drivers…
Seems to me that those are great driver options at a great price point with great shafts..
I don’t and won’t play either one of them but for someone’s money… Seems like a good deal
hbugolf89
Apr 9, 2013 at 10:09 am
False…….TEE uses watered down versions of these high end shafts with the retail graphics. The CB 4 had a made for RIP and the XCG series has a made for DI shaft. Not big into following Wilson, but I’m sure it correlates respectivly.
Joe Golfer
Apr 10, 2013 at 1:00 am
I’m not surprised. Clubs would be too expensive if they used the real deal aftermarket shafts. The Graphite Design Tour AD DI, if that’s what you mean by the “DI”, retails for $380. The Aldila RIP shafts go for about $160.
What is even more amazing is that, some “made for” shafts are actually made by the same company that has the graphics, just watered down versions with lower technology, less graphite and more resin, higher torque, etc etc…
And some of those “made for” shafts are not even made by the company that has their name on them. This was revealed in a blog by component company Hireko’s Jeff Summit. The real deal shaft company just takes the money and lets the clubmaker use their name and graphics, but the clubmaker can have a totally different company make that shaft, which just might be a piece of garbage or it might be something reasonably decent, but hardly the quality of the real deal.
thatsjapanesesfor far
May 1, 2013 at 11:29 am
they are not aftermarket shafts they are the stock shaftsthose companies choose and most all major companies have the same ability to put whatever shaft in they like the pings and titleist do not have made for shafts in 2013 it is the true shfts which sell for big dollars as well as the callawy razr extreme with the same shaft as exotics in it’s option package
paul
Apr 8, 2013 at 2:56 pm
I tried the Wilson D100 at the golf show when it came to town. What a great club. I hit it farther then the anser…
Adam
Apr 8, 2013 at 1:51 pm
I can say with 100% certainty that this testing is bogus. There is no way that the Ping Anser is the highest launching anything.
purkjason
Apr 8, 2013 at 1:32 pm
I smell money being exchanged under the table on this testing. Like everyone else I was shockingly suprised with the outcome of this testing. 1)Wilson Staff D100 …. now that’s funny. 2) Where are all the Adams Drivers? 3)The lack of Callaway hitting better scores. I did my own testing this weekend for 4.5 hours hitting every driver possible at Dick’s Sporting Goods and Golf Galaxy and the “Winner For Me” in distance and accuracy was the Callaway X Hot 9.5 Standard Head with a FREE upgrade Project X Velocity Pro 5.5 Shaft cut down 1.5″ to make it feel more like a 6.0 . The “FREE UPGRADED SHAFT” is what made the “BIG DIFFERENCE”. Outdrove every driver with that shaft by 9 yards !
thatsjapanesesfor far
May 1, 2013 at 11:32 am
Funny you should say that since dicks doesnt carry wlson products anyway.
rtylerg
Apr 8, 2013 at 1:12 pm
This ARC system is not a scientific test. Unless they’re using the same shaft with the same length in each of these heads matched to the same swing weight, which wasn’t mentioned anywhere on the website, there are far too many variables to determine which head is really the best. After checking on the Wilson D100 and Tour Exotics specs, it turns out that both these drivers come with premium aftermarket shafts whereas the other heads come with “made for” shafts. I could put a premium shaft in a KMart driver head and it would perform better than most drivers with “made for” shafts. I guess if you just want to buy a driver off the shelf then this testing is fine. However, most good manufacturers have aftermarket shaft options that will make a world of difference compared to their “off the shelf” shafts. Those of you using premium shafts in your drivers know what I’m talking about.
SV
Apr 11, 2013 at 11:56 am
This article simply states the ARC system gives starting information for people to consider based on manufacturer offering. It doesn’t pretend to be all encompassing. The majority of people can’t break 90 and a lot can’t break 100. I doubt premium shafts are going to make a difference. Until you have someone consistently in the low to mid 70s the premium shafts are just an ego trip and a waste of money.
thatsjapanesesfor far
May 1, 2013 at 11:26 am
Thw matrix in the exotics and wilson are stock shafts and the shafts for ping and titleist are not made for shafts anymore either the callaway raxr x has the same matrix shaft as the exotics also But just the comment itself is a little funny to me, if you go looking at a corvette and a chevy cruz do you ask them to put the ls9 in th cruz to check performance no you test what the companies produce so that arguement is kind of silly sounding.
Double Mocha Man
Apr 8, 2013 at 1:07 pm
Very good catch John.
John
Apr 8, 2013 at 12:10 pm
Very good article
Jaacob Bowden
Apr 8, 2013 at 12:07 pm
Interesting. 🙂
Wish this test would include a lot of the smaller manufacturers that have great products but limited marketing budgets.
Last I checked, I found 97 different companies that make a driver model…bet there would be some surprises in there.
Displayname
Apr 8, 2013 at 11:59 am
This is awesome! Glad to see Wilson shine, but I really wish Adams would have been included.