Equipment

Scotty Cameron Futura X7 and X7M putters

Published

11 years ago

Oct 6, 2015

Models: Futura X7 ($379), Futura X7M ($379), Futura X7M Dual Balance ($399)
Finish: Silver Mist with black anodized sole
Shaft Bend, Offset, Hang: Single, One Shaft, Face Balanced
Loft, Lie: 3.5 degrees, 70 degrees
Grip: 10-inch Matador Mid Red Midsize (77 grams)
Availability: October 23

Scotty Cameron’s new Futura X7 and Futura X7M putters are designed to deliver more stability and consistency on the putting green, with a multi-material construction that boosts the forgiveness of the putters.

[quote_box_center]“The motivation behind Futura X always has been to help golfers make a more stable, more balanced, more consistent, more confident stroke,” Scotty Cameron said in a Titleist press release. “We’ve enhanced those benefits with X7 and X7M through larger, multi-material constructions that make alignment simple. For the golfer, that translates into higher MOI for stability, a bigger sweet spot for forgiveness, easier alignment for a more confident setup, and a better, softer feel.”[/quote_box_center]

Golfers familiar with Cameron’s Futura X5 putter will notice that the X7 shares the same head shape, with the X7 being approximately 10 percent larger.

[quote_box_center]“The X7 is a line extension of the X5. It has the same head shape, but larger,” Cameron said. “A lot of touring pros requested it be larger. The larger we make it, the more forgiving it becomes with a larger sweet spot. This also allows us to add more alignment lines. The more lines, the easier it is to line up the ball.”[/quote_box_center]

What might go undetected, however, at least until golfers hit a putt with the X7, is the change in construction. The X7 uses what Cameron calls an “aluminum face-sole core,” which is surrounded by a stainless steel frame. Also, since the face of the X7 is made from aluminum, it will deliver a softer feel than the X5, which uses a 303 stainless steel putter face.

[quote_box_center]“The key feature is the two materials,” Cameron said. “Basically there are two constructions involved here. The feel and sound of the lightweight midsection are married together with the heavier surrounding heel, toe and back to be more forgiving, for better performance.”[/quote_box_center]

The X7M offers golfers a shape that resembles the X7, but adds what Cameron calls a “Bar-back design” that further boosts the MOI of the putter.

[quote_box_center]“With X7M, I wanted a round shape with a crisp and sharp look for alignment,” Cameron said. “X7 and X7M have a lot of the same features but the X7M is manipulated and made with a back weight for more MOI – thus the name, X7M, where the ‘M’ stands for MOI. Instead of having big ears and weights in the back [as in the Futura X], which some might call cumbersome, the bar on the back with the weights streamlines the shape. A few tour players also said shadowing on the course can sometimes affect sight lines, so on the X7M I raised the alignment lines and made them even longer.”[/quote_box_center]

The X7M is also available in a Dual Balance model, which uses a heavier head (400 grams) that is counterbalanced with a 15-inch grip and a 50-gram weight installed in the butt end of the putter.

[wrx_retail_links productid=”40″]

Equipment

Interesting clubs at top of bag – GolfWRXers discuss

Published

14 hours ago

Jun 3, 2026

Will Schube

In our forums, users are talking about top of bag setups that are non-traditional or thought-provoking in some way. Original poster @SuperSpurs106 inquired about other members who might use unorthodox set-ups to help with gapping issues or weak spots.

They wrote:

“I currently have a PING G430 driver, TM Qi35 3W and a TM Qi4D 7W. Driver and 7W are fine but can’t get on with my 3W and have always struggling with this club over the years. Thinking of adding a 2H which I know would look odd. Just wondering if anyone else had a weird set up at the top of their bag?”

Our members in the forum have offered up their thoughts and personal experiences with non-traditional top of bag set-ups, and their reasoning for thinking outside of the box to begin with. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

BowMain42: “Don’t worry about what “looks” odd. If the club does what you need it to do, it’s the right club.”
scooterhd2: “I cant hit 3 woods either. Thats why I roll with a unicorn XL Hibore 2 wood. 400 cc head at 16 degrees of loft and its just a monster 3 wood off the tee. Off the deck, we are playing the f6 baffler. 5 wood at 41.75 inches and its easy to control.”
phizzy30: “I had driver, 3 metal, 2/4 hybrid once upon a time as a higher ss player. 4 hybrid is gone and in place is a driving iron nowadays. I don’t think what you’re proposing is weird in anyway, however the yardage gap might be glaringly huge between driver and 2 hybrid. What is it about your 3 metal that has got you all messed up? You could always go 4 metal with shorter shaft and see if that works.”

Entire Thread: “Interesting clubs at top of bag”

If you aren’t a member, join us in the GolfWRX forums today!

Equipment

Members of the Mini Driver Club – GolfWRXers discuss

Published

14 hours ago

Jun 3, 2026

Will Schube

In our forums, one user has gone searching for fellow users of a mini driver. In a post, @TightFade asked for other mini driver users to chime in with their weapon of choice, the reason for employing a mini, and what club follows it in the bag.

@TightFade asked:

“What mini are you playing? What spot in the bag did it take over? What’s the next club after it? For me: Elyte mini 13.5. Replacing 3w. Next up club looks like it’ll be 5w.”

Our members in the forum have been sharing their own bag setups featuring the mini driver, and the various reasons they purchased one in the first place. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

RCGA: “Ping G430 Max 12* ‘Thriver.’ Next club is a 4w and 2i (I play a weird course).”
JMB3: “R7 at 12.75 with Diamana BB 63s. 3w replacement. Next Club: Elyte Ti 5w at 17*.”
ColdOkieGolf: “R7 15.5 turned down to 13.5 It replaces the 3w. I found it surprisingly easy to hit off the deck, and it’s very rare that I need or want to hit something beyond 250 from the fairway, so next club is my 7w.”
ChaosTheory: “I’m sub-90 MPH with driver. But I’m able to hit DOD. I have been wanting something like the R7 15.5, so I just ordered one. I have a spot in the bag so nothing has to go. But I could see it replacing my trusty 4 wood, which I never use for approach shots. Just tee shots and lay ups. If I drop the 4 wood, I will turn my 7 wood down to ~20 degrees and will have good gaps. I recently tried a thriver build: 12 degree driver turned to 14, with a heavier 44 inch shaft and added head weight. I hit it great. Very accurate and not overly high, but the problem was that it sometimes went as far as a typical drive. And that’s not what I needed. So I will probably turn the 15.5 up to 16.5 or even 17.5. It’s all theoretical at this point. ?”

Entire Thread: “Members of the Mini Driver Club…Check In.”

If you aren’t a member, join us in the GolfWRX forums today!

Whats in the Bag

Chris Gotterup WITB 2026 (June)

Published

14 hours ago

Jun 3, 2026

GolfWRX Staff

Chris Gotterup had >14 clubs in his bag when photographed prior to the Memorial Tournament.

Drivers: TaylorMade Qi4D (8 degrees), Ping G440 LST (9 degrees @8), Ping G440 LST (7.5 degrees)
Shafts: Project X HZRDUS Smoke Grey 6.5 TX 70 g, Project X HZRDUS T1100 Handcrafted 6.5 TX 70 g, Project X HZRDUS Smoke Grey 6.5 TX 70 g