Connect with us

Equipment

Cameron Studio Select Announced

Published

on

For quite a while, Scotty Cameron fans have been longing for a putter that was reminiscent of the original Studio Stainless line.

Clean lines, simple visuals, and no insert are just a few of the changes many golfers wanted to see in the update to the Studio Style series. It seems that Cameron is paying close attention to what his fans want, because the announcement of the Studio Select putters this week seems to include everything golfers have been asking for with a few improvements added for good measure. The biggest change with this line is the amount of customization possible. Head weight, shaft length, lie angle, neck style, and grip can be selected to fit a golfer’s individual preferences. The Studio Select will be made from 303 stainless steel and feature three prominent red dots in the cavity and face which are very popular on Cameron’s Tour putters including one belonging to a Mr. Eldrich “Tiger” Woods.

In his previous models, Cameron held fast to head weights which corresponded directly to shaft length. The shorter the putter, the heavier the head needed to be in order to maintain proper feel. The Studio Select has two circular weights drilled into the sole so head weight can change to fit the corresponding shaft length. According to Scotty Cameron, “Most putter heads are only weighted for 35-inch shafts and therefore, are much too light for shorter lengths, or too heavy for longer lengths.  Too often the same heads are placed in shafts of all lengths.  The result is the golfer having to hit at the ball instead of being able to stroke the ball, and that creates distance control problems.  The Studio Select putter line delivers a wide range of specifications and options, designed to accommodate a wider range of golfer requirements.”

In addition, the Studio Select will also be offered in two head shapes, Newport and Newport 2 as well as three different neck styles including plumbers, short flair, and the mid slant neck many golfers have missed. Not only can golfers pick a putter that suits their eye, but they now have a tremendous amount of control over the amount of toe hang on the putter. So a putter can now fit your stroke as well as your eye.

The lie angle of the putter can be adjusted anywhere from 69 to 73 degrees. The standard grip will be the new red Cameron Cord, although six different grip options are possible including, Black Studio Design, Red Studio Design, Black Baby T, Red Baby T, and Red Winn AVS Midsize. The Studio Select putters will be available March 15 at a MSRP of $325.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

13 Comments

13 Comments

  1. Mike

    Feb 15, 2008 at 11:51 am

    With this weighting will you have an option to weight the heal heavy in an attempt to make face balanced or close to.

  2. Blaine B.

    Feb 1, 2008 at 8:12 pm

    The fitting options are great, but I don’t think this new line is as visually appealing as the Studio Style.

  3. boysel21

    Jan 28, 2008 at 4:59 pm

    What will be the heaviest total weight the head will be available in?

  4. Glfwrxnut

    Jan 27, 2008 at 11:27 am

    Nice way to keep cost down for Titleist. Make one head and weight to shaft length.

    Can’t wait to see these in stores.

  5. Jimmy James

    Jan 26, 2008 at 1:37 am

    There is not a 2.5 model offered.
    The 4 models offered are:
    Newport, Newport 1.5, Newport 2, & Newport 2 Mid Slant.

  6. Bill O.

    Jan 25, 2008 at 7:54 pm

    Are there any Camerons available in 48″ length?

  7. K Vakamudi

    Jan 25, 2008 at 6:14 pm

    Karl,

    The Newport 2.5 will have the “Short Flair” which is the Santa Fe neck.

    Eric,

    The only lefty model will be the Newport 2 in 33, 34, 35″.

  8. Eric R

    Jan 25, 2008 at 4:48 pm

    What head and neck styles will be available left handed?

  9. Karl Van Norman

    Jan 25, 2008 at 10:17 am

    Will it be available with the Santa Fe style neck?

  10. K Vakamudi

    Jan 24, 2008 at 11:31 pm

    Rich,

    Shouldn’t be a problem getting one at any store around late March or early April.

    I would imagine checking with one of our sponsors would give the opportunity to pre-order one as well if you’re that impatient.

  11. Rich Clapper

    Jan 24, 2008 at 10:45 pm

    I have been anticipating the release of this putter since I saw a sales sample online. This may be a novice question, but will I be able to walk into Golf Galaxy and purchase one of these, or are they only going to be availbel via ordering?

  12. John Happel

    Jan 23, 2008 at 10:41 pm

    This is the best Newport series from Cameron in years. The classic lines, no insert, personalized weights/lengths/necks all demonstrate attention to detail and responsiveness to customer feedback. If it performs as well as the Studio Stainless line, I think this will be a great success.

    The only thing I see that is a negative is the inability for the customer to adjust the weight (via a weight kit). We’ll see how long Cameron holds out on the opportunity to up-sell an additional accessory!

  13. Greg Gronberg

    Jan 23, 2008 at 5:45 pm

    Only issue I see is you can still only order 35/330, 34/340, or 33/350 no other combination. It then has to be sent in to change.
    Greg

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Steve Stricker WITB 2024 (April)

Published

on

Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X

3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX

Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X

Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5

Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore

Putter: Odyssey White Hot No. 2

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet Grip Rite

Check out more in-hand photos of Steve Stricker’s clubs here.

Your Reaction?
  • 16
  • LEGIT2
  • WOW0
  • LOL0
  • IDHT1
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Alex Fitzpatrick WITB 2024 (April)

Published

on

  • Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic. 

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X

Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX

Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)

Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X

Putter: Bettinardi SS16 Dass

Grips: Golf Pride MCC

Check out more in-hand photos of Alex Fitzpatrick’s clubs here.

Your Reaction?
  • 8
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT1
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss

Published

on

In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
  • driveandputtmachine: “Still playing a MIni 300.  The head was only 208, so I ordered a heavier weight and play it at 3 wood length.  I am playing a Ventus Red 70.   I play 70 grams in my fairways.  I use it mainly to hit draws off the tee.  When I combine me, a driver, and trying to hit a draw it does not work out well most of the time.  So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck.  The 300 Mini is very good off the deck.”
  • JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”

Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”

Your Reaction?
  • 4
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT1
  • FLOP0
  • OB0
  • SHANK4

Continue Reading

WITB

Facebook

Trending