Equipment
Nike Vapor Flex and Vapor Speed Fairway Woods
Nike’s Vapor Speed and Vapor Flex fairway woods are designed to fly longer and straighter than the company’s previous fairway woods, regardless of how golfers use them.
At the request of Nike Golf athletes, the clubs were made larger than previous models. The Vapor Speed in particular was made 25 percent larger, making it a great choice for golfers who prefer a larger face profile in their fairway woods such as Tiger Woods.
Vapor Speed Fairway Wood ($199)
Engineers were also able to drive the center of gravity (CG) lower in the Vapor Speed fairway woods by adding slope to their crowns. That change, along with the synergy of Nike’s FlyBeam-reinforced Covert Cavity Back Design and Compression Channel, raises launch angle, lowers spin and adds ball speed — the key to more distance.
Vapor Flex Fairway Wood ($249)
The Vapor Flex fairway woods have the same technologies as the Vapor Speed models, but they’re smaller in size and have Nike’s new FlexLoft 2 adjustable hosel, which is 30 percent lighter than the company’s original FlexLoft hosel. It gives golfers the ability to adjust loft 2 degrees up or down from the stock setting and choose one of three independent face angles: left, neutral or right.
Note: The FlexLoft 2 adjustable hosel is compatible with Nike’s original FlexLoft hosel.
The Vapor Speed ($199) will be available in lofts of 15 and 19 degrees with Mitsubishi Rayon’s Fubuki Z 60 shaft (X, S, R, A and W flexes). The Vapor Flex ($249) will be available in lofts of 15 and 19 degrees with Mitsubishi Rayon’s Second-Generation Diamana S+ 70 shaft (X, S and R flexes).
Both fairway woods will be in stores on Jan. 30, 2015.
Specs
Equipment
Interesting clubs at top of bag – GolfWRXers discuss
In our forums, users are talking about top of bag setups that are non-traditional or thought-provoking in some way. Original poster @SuperSpurs106 inquired about other members who might use unorthodox set-ups to help with gapping issues or weak spots.
They wrote:
“I currently have a PING G430 driver, TM Qi35 3W and a TM Qi4D 7W. Driver and 7W are fine but can’t get on with my 3W and have always struggling with this club over the years. Thinking of adding a 2H which I know would look odd. Just wondering if anyone else had a weird set up at the top of their bag?”
Our members in the forum have offered up their thoughts and personal experiences with non-traditional top of bag set-ups, and their reasoning for thinking outside of the box to begin with. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- BowMain42: “Don’t worry about what “looks” odd. If the club does what you need it to do, it’s the right club.”
- scooterhd2: “I cant hit 3 woods either. Thats why I roll with a unicorn XL Hibore 2 wood. 400 cc head at 16 degrees of loft and its just a monster 3 wood off the tee. Off the deck, we are playing the f6 baffler. 5 wood at 41.75 inches and its easy to control.”
- phizzy30: “I had driver, 3 metal, 2/4 hybrid once upon a time as a higher ss player. 4 hybrid is gone and in place is a driving iron nowadays. I don’t think what you’re proposing is weird in anyway, however the yardage gap might be glaringly huge between driver and 2 hybrid. What is it about your 3 metal that has got you all messed up? You could always go 4 metal with shorter shaft and see if that works.”
Entire Thread: “Interesting clubs at top of bag”
If you aren’t a member, join us in the GolfWRX forums today!
Equipment
Members of the Mini Driver Club – GolfWRXers discuss
In our forums, one user has gone searching for fellow users of a mini driver. In a post, @TightFade asked for other mini driver users to chime in with their weapon of choice, the reason for employing a mini, and what club follows it in the bag.
@TightFade asked:
“What mini are you playing? What spot in the bag did it take over? What’s the next club after it? For me: Elyte mini 13.5. Replacing 3w. Next up club looks like it’ll be 5w.”
Our members in the forum have been sharing their own bag setups featuring the mini driver, and the various reasons they purchased one in the first place. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- RCGA: “Ping G430 Max 12* ‘Thriver.’ Next club is a 4w and 2i (I play a weird course).”
- JMB3: “R7 at 12.75 with Diamana BB 63s. 3w replacement. Next Club: Elyte Ti 5w at 17*.”
- ColdOkieGolf: “R7 15.5 turned down to 13.5 It replaces the 3w. I found it surprisingly easy to hit off the deck, and it’s very rare that I need or want to hit something beyond 250 from the fairway, so next club is my 7w.”
- ChaosTheory: “I’m sub-90 MPH with driver. But I’m able to hit DOD. I have been wanting something like the R7 15.5, so I just ordered one. I have a spot in the bag so nothing has to go. But I could see it replacing my trusty 4 wood, which I never use for approach shots. Just tee shots and lay ups. If I drop the 4 wood, I will turn my 7 wood down to ~20 degrees and will have good gaps. I recently tried a thriver build: 12 degree driver turned to 14, with a heavier 44 inch shaft and added head weight. I hit it great. Very accurate and not overly high, but the problem was that it sometimes went as far as a typical drive. And that’s not what I needed. So I will probably turn the 15.5 up to 16.5 or even 17.5. It’s all theoretical at this point. ?”
Entire Thread: “Members of the Mini Driver Club…Check In.”
If you aren’t a member, join us in the GolfWRX forums today!
Whats in the Bag
Chris Gotterup WITB 2026 (June)
- Chris Gotterup had >14 clubs in his bag when photographed prior to the Memorial Tournament.
Drivers: TaylorMade Qi4D (8 degrees), Ping G440 LST (9 degrees @8), Ping G440 LST (7.5 degrees)
Shafts: Project X HZRDUS Smoke Grey 6.5 TX 70 g, Project X HZRDUS T1100 Handcrafted 6.5 TX 70 g, Project X HZRDUS Smoke Grey 6.5 TX 70 g


Mini driver: TaylorMade BRNR (13.5 degrees)
Shaft: Project X HZRDUS Black TX 80 g

5-wood: TaylorMade Qi4D (18 degrees)
Shaft: Mitsubishi Chemical Diamana WB Wood Shaft 83 TX

7-wood: TaylorMade Qi4D (21 degrees)
Shaft: Mitsubishi Diamana WB Wood Shaft 83 TX

Irons: TaylorMade P770 (3), Bridgestone Tour B 220 MB (4-9)
Shafts: KBS C-Taper 130 X


Wedges: TaylorMade MG5 (46, 52, 56, 60)
Shafts: KBS C-Taper 130 X, True Temper Dynamic Gold Tour Issue X100

Putter: TaylorMade Spider X Tour
Grip: SuperStroke Zenergy Pistol 2.0

Grips: Golf Pride Z Grip Cord
Ball: Bridgestone Tour B X Mindset
Check out more in-hand photos of Chris Gotterup’s clubs here.
-
News3 days agoRussell Henley’s winning WITB: 2026 Charles Schwab Challenge
-
Whats in the Bag2 weeks agoAaron Rai’s winning WITB: 2026 PGA Championship
-
Tour Photo Galleries2 weeks agoPhotos from the 2026 CJ Cup Byron Nelson
-
Equipment2 weeks agoCJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
-
Equipment11 hours agoDetails on Jason Day’s latest prototype Avoda iron setup
-
News6 days agoCharles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
-
Equipment1 week agoDetails on J.J. Spaun’s surprise putter switch
-
Popular Photo Galleries1 week agoPhotos from the 2026 Charles Schwab Challenge











brett w
Dec 30, 2014 at 10:32 pm
They mention that the woods are bigger this year but does anyone know the exact size in cc’s?
spazo
Oct 16, 2014 at 12:27 pm
yet another taylormade slot copy.
Jakebyers23
Oct 17, 2014 at 2:14 pm
If you look back to the Nike Victory Red driver from 2010 it had the “slot”. This is long before any Taylormade club had one.
Keith
Oct 17, 2014 at 3:05 pm
Pretty sure nike was the first to do that slot on the driver. Called it a compression channel.
Dave
May 7, 2015 at 1:48 am
Nike and Adams were first with slot technology. Then TM purchased Adams.
gwillis7
Oct 15, 2014 at 8:33 am
Ya I love the way these look. I like the bright green highlights….reminds me of oregon football.
A lot of traditionalists hate nike i realize that, but I think their clubs look really good. I should say their ‘woods’ look really good every year.
Still haven’t bought one though lol
Pingback: Nike Vapor Flex and Vapor Speed Fairway Woods Review | Golf Gear Select
Cwolf
Oct 13, 2014 at 9:12 pm
I’d like the speed with the flex shaft.
Kyle
Oct 13, 2014 at 6:34 pm
Sign me up for vapor speed!
Golfraven
Oct 13, 2014 at 3:43 pm
yep, straighter and longer – of course. ehh, nope. I rather invest same cash into Titleist woods.
Charlie
Oct 13, 2014 at 1:51 pm
Meh. Look at that sole. Nothing will beat out my Tour Edge CB Pro!
enrique
Oct 13, 2014 at 12:14 pm
My previous post was removed – but I’ll ask again – are these available soon or next year like the drivers?
hjsdl
Oct 13, 2014 at 1:10 pm
First week on November I believe..
hjsdl
Oct 13, 2014 at 1:11 pm
pre ordering starts..
Billy
Oct 13, 2014 at 2:10 pm
Out 1/31/15
enrique
Oct 13, 2014 at 5:51 pm
That’s what I thought – Basically February of 2015.
Mark
Oct 13, 2014 at 12:14 pm
Non adjustable version looks very good from above. Shame about the sole plate…
adolfo
Oct 13, 2014 at 11:04 am
wow do they look good. still going to be a tough sell to knock my pings out of my bag though