Connect with us

Equipment

Rickie Fowler and Hideki Matsuyama make big gear changes in Napa

Published

on

Andrew Tursky was on site at the Fortinet Championship this week and got all he could handle in terms of new equipment news. There were new irons, drivers, and even headcovers all over the range, so we had to dig into two of the biggest stories out there on this week’s Two Guys Talking Golf Podcast (give us a follow on Instagram: @tg2wrx).

Rickie Fowler’s new irons

Rickie Fowler has been changing a lot of equipment in his bag as he has struggled to get his golf game back into shape. We have seen him with different drivers, shafts, irons, and putters throughout the 2021-2022 season. Fowler has typically played some form of blade during his career, and Cobra even made him some signature Rev33 blades that were beautiful, but razor thin and intimidating for us mortal golfers.

Rickie showed up to the Fortinet with some brand new, unreleased, Cobra King Tour irons. The King Tour irons look a lot like the current Cobra King Tour MIM irons, and we can only assume that the new Tour will replace the MIM.

The interesting thing about the King Tour irons is that they look a little larger than his preferred blades and that they might have a little more ball speed and distance built into them. From the images you can tell there is a little slot behind the face that might be filled with some type of polymer.

Rickie didn’t get into the tech of the new King Tour irons but did tell Tursky that he was gaining around 3-4 yards on shots that he stuck low on the face. He finished the first round of the Fortinet Championship in the top four, so the new irons have seen some success under pressure. I know many of us hope to see Rickie back to form soon, and maybe these new King Tour irons can be the catalyst.

Hideki Matsuyama’s driver change

The other big story comes from a former Masters Champion testing out some new drivers on the range, Hideki Matsuyama. Matsuyama is well known as a golfer who loves to test and tinker with new golf equipment. Each week there is a good chance that he will have multiple drivers, irons, and fairways in the bag searching for the perfect club that week.

Earlier this week, Hideki was spotted with some new, unreleased, Srixon drivers out on the range in Napa. We spotted a few pros testing the new Srixon ZX7 MkII and ZX 5 MkII LS on the range.

Andrew spoke to the Srixon reps and learned Hideki has been trying the new drivers and seems to have settled on a Srixon ZX5 MkII in 10.5 degrees of loft (and his trusty Graphite Design Tour AD DI 8 TX shaft).

The ZX5 MkII LS looks to have an adjustable weight on the sole that is moved far forward —closer to the face — to possibly lower the spin. We haven’t heard anything specific from Srixon on the new drivers, but with their recent success, we would expect to see some solid performance out of the line.

Check out the full TG2 podcast, below

Your Reaction?
  • 144
  • LEGIT23
  • WOW7
  • LOL7
  • IDHT3
  • FLOP3
  • OB3
  • SHANK7

I have been an employee at GolfWRX since 2016. In that time I have been helping create content on GolfWRX Radio, GolfWRX YouTube, as well as writing for the front page. Self-proclaimed gear junkie who loves all sorts of golf equipment as well as building golf clubs!

1 Comment

1 Comment

  1. No donkeys allowed

    Sep 17, 2022 at 9:52 am

    Where’s the big donkey Kuchar?

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

What is the benefit of using a wedge instead of PW or GW from the iron set? – GolfWRXers discuss

Published

on

In our forums, our members have been discussing the pros and cons of using a pitching or gap wedge from an iron set. WRXer ‘jpark0221’ kicks off the thread, asking:

“What is the benefit of doing this instead of using PW from the iron set, which is essentially 10i? I see a lot of pros using wedges from different brands (e.g. Vokey) instead of PW from the same set.”

And our members have been sharing their thoughts in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • North Butte: “The only way you’ll know is try a different (specialty) wedge instead of the one marked P and see how it works. Give it a couple of dozen rounds, you can’t really tell whether a wedge has an advantage until you get used to playing various shots with it. My point being…they play those wedges because it’s what works best for their game. And you ought to play what works best for your game too. Your best choice won’t necessarily be the same type of club as someone else’s.”
  • Jc0: “If you look a little closer, you’ll notice that most pros who have a specialty 46/48 wedge usually play cavity backs. The speciality wedge is more blade-like to allow a little more control and the ability to play shots a little easier than the PW that matches their set would provide. If a pro plays blades, they usually have the same blade for PW.”
  • PureStrikes54: “Flighting shots lower, getting additional spin for stopping power and to hit it shorter, and minimizing the chance of hitting flier moon balls you can sometimes get with even players cavity irons. At that level, very few players want to be hitting their pitching wedge more than 150 yards. The wedge is a scoring club and is almost always being used to hit knockdowns to tweener yardages.”

Entire Thread: “What is the benefit of using a wedge instead of PW or GW from the iron set?

More from the Forums

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL3
  • IDHT0
  • FLOP1
  • OB1
  • SHANK2

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (12/7/22): Nike VR Pro Combo CB irons

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a set of Nike VR Pro Combo CB irons

From the seller (@bdawg983): “Nike VR Pro Combo CB irons 4-PW. They have Project X 5.5 flex steel shafts and Golf Pride Tour Velvet Midsize grips. Project X shaft bands have been removed. 4 and 5 are standard length, 38.5 and 38. They have P stamped on the hosel. 6-PW are .5 inch short (37, 36.5, 36, 35.5, 35). Played the last few seasons. They have A stamped on the hosel. A few dings and groove wear from regular play, but no browning. $300.”

To check out the full listing in our BST forum, head through the link: Nike VR Pro Combo CB irons

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK2

Continue Reading

Equipment

TaylorMade unveils all-new P770, P7MC, and P7MB irons

Published

on

TaylorMade Golf has today announced the latest evolution of its acclaimed P700 Series with the all-new P770, P7MC, and P7MB irons.

TaylorMade P770 Irons

The all-new P770 irons feature a thinner top line, less offset in long irons, and a shorter blade length when compared to the P790. With its hollow body construction and forged L-Face, the 2022 P770 is designed to provide elevated distance, forgiveness, and excellent feel in a smaller sized head.

The P770 features FLTD CG, a strategic design that positions the center of gravity (CG) lowest in long irons and progressively shifts it higher throughout the set to the shorter, weaker lofted irons. The tungsten weighting scheme in the long and middle irons has been redesigned, shifting more weight to the longer irons’ low tungsten mass and a reduction in the middle irons’ tungsten, resulting in an ascending CG through the set.

The aim behind the FLTD CG strategic design is to create easier launch and playability in the long irons while optimizing trajectory and spin in the scoring clubs. 

The P770 irons feature SpeedFoam Air, a technology introduced in 2021 with the launch of the P790. SpeedFoam Air dampens sound and strategically supports the face with a material 69 percent less dense than SpeedFoam, which was seen in the prior generation of the P770.

In addition to the added speed made possible by the thinnest P770 face TaylorMade has produced, the Thru-SlotSpeed Pocket and Inverted Cone Technology aim to help unlock increased ball speed across the face and forgiveness low in the face, where mishits happen most commonly.

“P700 Series irons need to be technical, elegant and timeless and the new P·770 design has all of that in spades. We wanted to take as much performance and hide it on the inside of the iron to where you look at it and it looks like a clean and classic iron with the pearl satin chrome finish and hint of mirror on the toe. On the inside, the technology we have poured in to this iron creates a product that we believe is truly one of one in this space.” – Matt Bovee, Director, Irons Product Creation

Specs, Availability & Pricing

  • Specs: P770 is offered in 3-PW/AW and comes equipped with KBS Tour Steel shafts (X130g, S 120g) as well as Golf Pride Z-Grip 360 in Grey/Black
  • Availability: Pre-order on December 6 at TaylorMadeGolf.com and at retail beginning January 20, 2023
  • Pricing: $1299 USD (steel) and $1499 USD (graphite)

TaylorMade P7MC Irons

The tour-inspired P7MC iron features minimal offset and perimeter weighting.

A narrow sole and tight leading edge aims to ensure consistency through the turf, while TaylorMade’s Compact Grain Forging process uses 2,000 tons of pressure, more than double the industry standard, with the additional force giving TaylorMade engineers precision control at a micro level, producing a tighter grain structure for the best possible feel and strength properties.

Compact Grain Forging seeks to deliver a refined composition inside and out, with the sophisticated craftsmanship coming to life with a satin finish and forged “Metal-T” within the cavity back.

Per TaylorMade, precision in P7MC is paramount, which is why the face of this iron is continued to be machined. Machining the face aims to ensure precision and quality with TaylorMade’s most aggressive score line geometry for exacting shot making.

“There’s no better feeling than a solidly hit forged iron. For pure ball strikers, the consistency of P7MC rivals anything in the marketplace today and has been a favorite among skilled golfers. For players who choose to combo, our cohesive design language allows you to seamlessly pair it with either P770 or P7MB. No two golfers play the game exactly alike, and one of the things I love about our P·700 Series family is the ability for golfers to personalize a set to match their needs and maintain aesthetic unity.” – Matt Bovee, TaylorMade Golf, Irons Product Creation

Specs, Availability & Pricing

  • Specs: P7MC is offered in 3-PW and come equipped with KBS Tour Steel shafts (X130g, S 120g) as well as Golf Pride Z-Grip 360 in Grey/Black
  • Availability: Pre-order on December 6 at TaylorMade Golf.com and at retail beginning January 20, 2023
  • Pricing: $1299 USD (steel) and $1499 USD (graphite) as seven-piece sets

TaylorMade P7MB Irons

As a result of detailed feedback from testing with Rory McIlroy and Collin Morikawa, the P7MB features a shorter blade length, brand new sole geometry, and progressive offset to create a minimalist profile that’s designed to control shot shape and trajectory.

The sole of P7MB is one millimeter narrower than the previous generation, meaning TaylorMade engineers had to add slightly more bounce to the leading edge which creates a completely different sensation through the turf. Total effective bounce is a combination of sole width and bounce angle, which engineers were able to perfect by increasing the bounce angle to keep the sole from getting caught in the turf.

The shorter blade length of P7MB allowed TaylorMade engineers to create an updated backbar using symmetrical geometry. This allows for more mass to be positioned directly behind the face to support the point of impact and elevate feel.

In addition, the P7MB also features the Compact Grain Forging and machined face and grooves that are also seen in the P7MC irons.

“The narrower sole width of P7MB is a direct result of testing and feedback from Rory McIlroy, Collin Morikawa and our TaylorMade Tour pros. Rory and Collin worked with us to identify the right sole geometry and bounce to match what they were looking for and we perfected that with P7MB. Having two of the best players in the world being a driving force behind the design of this iron have us extremely excited to bring it to the marketplace.” – Matt Bovee, Director, Irons Product Creation

Specs, Availability & Pricing

  • Specs: P7MB is offered in 3-PW and come equipped with KBS Tour Steel shafts (X130g, S 120g) as well as Golf Pride Z-Grip 360 in Grey/Black
  • Availability: Pre-order on December 6 at TaylorMade Golf.com and at retail beginning January 20, 2023
  • Pricing: $1299 USD (steel) and $1499 USD (graphite) as seven-piece sets
Your Reaction?
  • 73
  • LEGIT9
  • WOW4
  • LOL9
  • IDHT0
  • FLOP9
  • OB9
  • SHANK20

Continue Reading

WITB

Facebook

Trending