Equipment
Addressing club fitting’s biggest myth: It’s only for good players
By far, one of the biggest misconceptions among golfers is that club fitting is only helpful to the most skilled who can really “tell the difference.” This couldn’t be further from the truth. Getting fit for a set of clubs is no different than getting fit for a suit or a dress — everybody can benefit from having something tailored just for them, whether it be simple adjustments or a full-blown bespoke experience.
To break down one of the club fitting world’s greatest myths, we have teamed up with Club Champion to help you better understand how the process can help you have more fun and play better golf.
What are the benefits of a club fitting for any level of golfer?
- For higher handicap and more beginner golfers, a club fitting helps to eliminate unnecessary variables that work against you on the course and while practicing. Especially for beginners or people taking lessons, it’s imperative to have equipment that works with your body, not against it. The right clubs prevent you from having to compensate for things like lengths that are too short or grips that are the wrong size.
- By working with a fitter, a golfer will get a better understanding of how his/her body and natural swing motion relate to their equipment.
- A fitting will help any golfer find out exactly what they need to achieve their specific performance or scoring goals.
- Fittings lead to lower scores, more distance, better dispersion, and a lot of other benefits whether you’re a high handicapper or a scratch golfer. The reason pros tinker with their clubs all the time is because details matter.
- It’s not just about making your best shots better, it’s about making your worst shots more playable. This applies across all skill levels, and the more a fitter can help keep the ball closer to the intended target, the quicker you are going to see results on the course and on your scorecard.
How does a less skilled golfer specifically benefit from a club fitting?
- The interesting thing is higher handicaps actually benefit more since there tends to be more low-hanging fruit that fitters can adjust that help them see instant results. In a way, it’s like making sure you have the right size bike — you’ll struggle to ride an improperly sized bike but as soon as you have the right fit, you’re flying.
- As mentioned above, a fitting helps beginners by removing obstacles that work against their natural swing motion.
- We fit a lot of golfers and generally, there’s an education gap with higher handicaps in terms of what technology is out there to help their game. We’ve had people come in with 20-year-old clubs who don’t know what sort of clubs are available on the market now and how much easier newer clubs can be to hit. If we use players on the lower end of the speed spectrum as an example – in the last 5 years have we seen a huge improvement in lighter weight shaft technology.
- We see some of the biggest gains with putters, a club many golfers really don’t think that much about when it comes to fitting. Most golfers just buy the style that suits their eye, not their stroke, so there are massive improvements to be had on the green. It could be a whole new putter or just a grip and length change but when you consider how many shots you take on the greens, a 15-20 percent improvement can be a game-changer.
How does something on the level of a “basic” fitting help golfers over using off the rack?
- Small details like shaft flex, length, and swing weight play a huge factor in success, and when you buy off the rack you’re just guessing on how those and many other factors will work for you.
- Even just having your existing set adjusted will lead to better golf. Even if it’s not absolutely optimized, small tweaks are a lot more beneficial than off-the-rack clubs built for the masses.
- No golfer is truly “average” in the sense that everyone’s body is so different. Height, swing motion, strength/speed, attack angle, etc. — all of these things change from person-to-person, even if everyone in the test group is the same handicap.
- Lastly, stock clubs are mass-produced, which can lead to inconsistencies throughout the set and those variables can be addressed and eliminated even with a basic fitting.
- LIKE25
- LEGIT1
- WOW2
- LOL1
- IDHT1
- FLOP4
- OB4
- SHANK4
Driver: Ping G430 LST (9 degrees) Buy here.
Shaft: Accra TZ Six ST
3-wood: Ping G430 Max (15 degrees) Buy here.
Shaft: Project X HZRDUS Smoke Green 80 6.5 TX
7-wood: Ping G425 Max (20.5 degrees) Buy here.
Shaft: Project X HZRDUS Smoke Green 90 6.5 TX
Irons: Srixon ZX (2, 3) Buy here, Srixon ZX7 Mk II (4-9) Buy here.
Shafts: Project X HZRDUS Smoke Black 6.5 90, 6.5 100 (2-3), True Temper Dynamic Gold Tour Issue X100
Wedges: Cleveland RTX 6 Tour Rack (46-10 Mid, 52-10 Mid, 56-10 Mid, 60-9 Full) Buy here.
Shafts: True Temper Dynamic Gold Tour Issue X100
Putter: Odyssey Jailbird Versa Buy here.
Grip: SuperStroke Zenergy Flatso 1.0
Grips: Golf Pride MCC
The winning WITB is presented by 2nd Swing Golf. 2nd Swing has more than 100,000 new and pre-swung golf clubs available in six store locations and online. Check them out here.
- LIKE1
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Driver: Titleist TSR3 (9 degrees, D1 SureFit setting)
Shaft: Fujikura Ventus Blue 6 X
3-wood: TaylorMade Stealth Plus (15 degrees)
Shaft: Fujikura Ventus Blue 8 X
Hybrid: Titleist TSR3 (19 degrees, D1 SureFit setting)
Shaft: Fujikura Ventus Blue HB 9 X
Irons: Titleist T200 (4, 5), Titleist 620 CB (6-9)
Shafts: Project X 6.0
Wedges: Titleist Vokey Design SM10 (46-10F, 50-12F, 54-12D, 60)
Shafts: Project X 6.0
Putter: Scotty Cameron P5 prototype
Grips: Golf Pride Tour Velvet
Ball: Titleist Pro V1
Check out more in-hand photos of Ben Kohles’ clubs in the forums.
- LIKE5
- LEGIT0
- WOW0
- LOL1
- IDHT0
- FLOP0
- OB0
- SHANK0
- Kris Kim what’s in the bag accurate as of the CJ Cup Byron Nelson. More photos from the event here.
Driver: TaylorMade Qi10 (9 degrees @7)
Shaft: Mitsubishi Tensei 1K White 60 TX
3-wood: TaylorMade Qi10 Tour (15 degrees @13.5)
Shaft: Mitsubishi Diamana WB 73 TX
Irons: TaylorMade P770 (2, 4), TaylorMade P7MB (5-PW)
Shafts: Mitsubishi Tensei 1K White 80 TX (2), Nippon N.S. Pro Modus3 Tour 120 X
Wedges: TaylorMade MG4 (50-09SB, 56-12SB, 60-11TW)
Shafts: Nippon N.S. Pro Modus3 WV 125
Putter: TaylorMade Spider Tour
Grips: Golf Pride Tour Velvet Cord
Check out more in-hand photos of Kris Kim’s equipment here.
View this post on Instagram
- LIKE1
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Dave Portnoy places monstrous outright bet for the 2024 Masters
John Daly stuns fans into silence with brutal opening tee shot on PGA Tour Champions
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
Two star names reportedly blanked Jon Rahm all week at the Masters
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
Taylor Pendrith’s winning WITB: 2024 CJ Cup Byron Nelson
Driver: Ping G430 LST (9 degrees) Buy here. Shaft: Accra TZ Six ST 3-wood: Ping G430 Max (15 degrees) Buy here....
Ben Kohles WITB 2024 (May)
Driver: Titleist TSR3 (9 degrees, D1 SureFit setting) Shaft: Fujikura Ventus Blue 6 X 3-wood: TaylorMade Stealth Plus (15 degrees)...
Kris Kim WITB 2024 (May)
Kris Kim what’s in the bag accurate as of the CJ Cup Byron Nelson. More photos from the event here....
Richy Werenski WITB 2024 (May)
Richy Werenski what’s in the bag accurate as of the CJ Cup Houston Open. Driver: Titleist TSR3 (10 degrees, D1...
-
19th Hole2 weeks agoJustin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole2 weeks ago‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole3 weeks agoTwo star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole3 weeks agoReport: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole3 weeks agoNeal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole3 weeks agoBrandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
-
19th Hole1 week agoLET pro gives detailed financial breakdown of first week on tour…and the net result may shock you
-
Equipment3 weeks agoJason Day on his recent switch into Srixon ZX5 and ZX7 Mk II irons
Pingback: Fitter feedback: Club Champion fitters offer their best advice – GolfWRX
Pingback: What to expect during a club fitting – GolfWRX
CrashTestDummy
Jun 28, 2021 at 7:51 pm
Lessons will help more with mid to high handicap golfers, but still all golfers can benefit from club fitting. Ill-fit equipment (especially ill-fit shafts) can produce a lot of bad compensations in the golf swing. At the very least, it can put golfers in the equipment that can help them improve the most and shafts that fit according to their tempo, strength, and swing speed, as well as clubheads that that can aid them in hitting the ball better. The majority of golfers I see are using ill-fit equipment or very outdated equipment.
Brandon
Jun 28, 2021 at 12:14 pm
There isn’t a fitter in the world who can help you when you hit 5 inches behind the ball and chuck beaver pelts all over.
Aztec
Jun 28, 2021 at 11:02 am
I’ve known a lot of people who get fitted into a driver saying they chose a specific combo of head and shaft because it had the tightest dispersion during the fitting process. But they still have their fades turn into slices and draws turn into hooks with no less frequency than before. And then there are the ones who had their shafts ‘pured’ – I have NEVER seen this make any difference to anyone’s game.
Nonsense
Jun 28, 2021 at 3:34 am
Agreed with the comments.
Get length and lie close for high to mid cap. Wait until someone has a semblance of a repeatable action.
I’ve got mates that shoot in the teens, and fitting them would be a disaster. But I also know some shorter women, one of which is playing mens length and she obviously struggles. That’s not a fancy fitting; that’s just common sense.
A. Commoner
Jun 27, 2021 at 12:15 pm
Nothing like an independent free-thinking unbiased Fuller Brush sales pitch.
Alex
Jun 27, 2021 at 12:03 pm
Worst article written. Stop pushing fitting to a 20 handicapper who cant tell a difference between a hosel or a club face
Mooseface McStoner
Jun 27, 2021 at 1:17 am
There are 3 problems:
1. There are far too many people “fitting” golfers who are not qualified to be doing it… thus ruining the experience and perhaps even driving them away from the game.
2. Pretty much everyone trying to make this case have a vested interest in more people getting fit – and purchasing higher-end products.
3. People think more with their wallets than their brains. They can justify “clubs” because they are shiny and new and magic, and will undoubtedly improve their game – says so in the ads! Whereas good fitters tend to dispel the “shiny new magic” myths… so much so, you might end up with the same boring old clubs bent to new specs, or “just” new shafts. Far less drool factor.
All you need to is watch every single thread on new clubs: looks are discussed far more than performance. And not just on new release – eg; “I wouldn’t play the AP2 cuz they were too techy looking, but those new 2022 T100s! Yum!”. Looks over performance = new clubs over fitting.
geohogan
Jun 26, 2021 at 7:16 pm
IMO the most important aspect of club fitting is lie angle.
Soft carbon steel, irons bend out of proper lie angle very easily.
Ive never found sets of clubs being used by mediocre to very good players that didnt have at least one of two clubs with lie angles drastically different than clubs they hit the best.
These relatively small (2-4 degree) adjustments can be made with a bending bar, as long as, the shaft isnt held rigid. ie let the shaft bend as clubhead lie angle is bent. If shaft is held rigid in a vise, the clubhead is easily broken, especially with hard SS clubheads.
IMO with clubhead on the ground in proper hitting angle, all the grip butt ends should be the same distance from the ground. its that simple. Welcome criticism.
Walter Sobchek
Jun 26, 2021 at 12:30 pm
Aside from basic shaft length and flex club fittings for higher handicaps is overrated. Higher handicaps don’t have accurate, repeatable swings so the club fitter has a harder time figuring out the best lie angle, etc for them. Higher handicaps would do better spending their money on lessons, try to learn how to swing correctly, and produce a more repeatable, correct swing.
Danie
Jun 25, 2021 at 6:26 pm
Biggest Myth: “Quality club fitting is available to most golfers”.
These club fitting articles get annoying. I get it, get fit. Try it outside of mega golf centres and cities, I dare you. Not even to mention the awesome shaft and club selection available to female golfers if they eventually do get access to a fitting studio.