Equipment
Best driver under $100
Look, we get it, golf clubs, more specifically new drivers, can be expensive. Once you factor in the potential cost of a fitting and or other shaft options you could be looking at a single club that retails for close to $1,000—that’s a lot of dough! That’s why we want to help show you what you can get for your money with the best driver under $100.
As much as we love new clubs and new technology, at GolfWRX we still love to find the best deals to help golfers get the most value and when it comes to clubs and in this case drivers. There is a lot of value in the marketplace if you know where to look, so we did the looking for you and have assembled the best drivers you can find under $100.
** Note: Used club prices fluctuate and the clubs selected for this list we’re easily located in good shape for under the stated $100 price point **
Best driver under $100
Taylormade Jet Speed
As far as marketing a driver goes, I don’t think anyone has still quite figured out how or why tour player puppet look-a-likes was a great idea, but the Jet Speed driver itself was actually a really good driver that offered adjustability and mid to lower spin in a forgiving design. The best part about the JetSpeed is the current TaylorMade adapter is still compatible, so if you happen to have a few shafts kicking around you can even do some testing.
Adams XTD
The XTD was the last “premium line” driver ever produced by Adams golf, and it benefits from the fact that by this time TaylorMade had purchased the Plano, Texas-based company and it was using the same adapter tip as the current crop of TaylorMade drivers.
It was designed to produced right to the limit CT/CoR numbers, thanks in part to slots placed both on the sole but also on the crown, and because of this design, it was a bit of an acquired taste for some golfers. If you can get past the looks from address, you will have yourself a driver that keeps up to almost anything.
Titleist 910
The Titleist 910 is another driver that benefits from being older, while still using the same type of adapter as the modern models. It came in two versions; the 910D2 which was shallower and more forgiving, and the 910D3 which is a more traditional pear shape with a taller face that offers lower spin.
Both versions of the driver can be found in nice shape for under $100, and if you take some time to look around, you can find quite a few with aftermarket shafts that make this best driver under $100 seem like a complete bargain.
Cleveland Launcher DST – Distance Sub Three hundred
The Cleveland Launcher DST drivers could be one of the best all-around options when it comes to a driver for under $100.
Like others on this list, the Launcher DST came in a couple of options; a standard model and a “tour” version featuring a lower spinning fade biased head design. For the stronger players that prefer a fixed hosel, the DST Tour came stock with a Miyazaki Kusala Black which in the aftermarket would cost around $300 on its own!
GolfWRXers discussed the best driver under $100 back in 2018 in the forums. See what they said.
- LIKE104
- LEGIT10
- WOW3
- LOL3
- IDHT1
- FLOP2
- OB1
- SHANK9
Whats in the Bag
Steve Stricker WITB 2024 (April)
- Steve Stricker WITB accurate as of the Zurich Classic. More photos from the event here.
Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X
3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX
Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X
Irons: Titleist T100 (3-9)
Shafts: Project X 6.5
Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore
Putter: Odyssey White Hot No. 2
Ball: Titleist Pro V1x
Grips: Golf Pride Tour Velvet Grip Rite
Check out more in-hand photos of Steve Stricker’s clubs here.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Whats in the Bag
Alex Fitzpatrick WITB 2024 (April)
- Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X
Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX
Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)
Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X
Putter: Bettinardi SS16 Dass
Grips: Golf Pride MCC
Check out more in-hand photos of Alex Fitzpatrick’s clubs here.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss
In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
- driveandputtmachine: “Still playing a MIni 300. The head was only 208, so I ordered a heavier weight and play it at 3 wood length. I am playing a Ventus Red 70. I play 70 grams in my fairways. I use it mainly to hit draws off the tee. When I combine me, a driver, and trying to hit a draw it does not work out well most of the time. So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck. The 300 Mini is very good off the deck.”
- JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”
Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”
- LIKE3
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
-
19th Hole2 weeks ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole4 days ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole2 weeks ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole4 days ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole1 week ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole2 weeks ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole1 week ago
Brandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
Jono
Nov 3, 2020 at 4:22 pm
RBZ tour
Speedy
Nov 1, 2020 at 4:58 pm
Callaway XR driver.
Jbone
Oct 31, 2020 at 8:36 pm
905S>>>>
G25 fairway>>>>>
Matt
Oct 31, 2020 at 6:05 pm
Ping Anser is hands down the best under $100 and it might be under $50. Still out plays my Mavrik and G410.
F Couples
Oct 31, 2020 at 2:52 pm
Bridgestone J33r
Jason
Oct 30, 2020 at 9:15 pm
I bought a used Jet Speed in VGC for $60. It was good, but adjustable drivers just feel head heavy to me. I bought a new Aeroburner on eBay for $125. It feels great. But, if you can find one in good shape, the TaylorMade Burner 2007 driver is one of the best ever, imo.
Brandon
Oct 30, 2020 at 6:43 pm
I got a brand new Cobra LTD Pro for 99 bucks from golf etail about 2 years ago. Still the best deal on golf equipment I’ve ever seen. To bad I let a buddy use it and now it has the worst sky marks you can imagine.