Connect with us

Opinion & Analysis

Thanks, Mom…

Published

on

There is this thing that happens as you grow older and become a parent—you suddenly appreciate all of the things your parents did for you (both big and small), and for some reason, the small ones stick out more.

Whether it be dragging your lazy 8-year-old butt out of bed to go to hockey practice at 7 a.m. on a cold December morning or dropping you off at the golf course before the sun comes up in July, these acts all took precious time away from potentially doing other things—like sleeping in on weekends—which as the parent of a toddler now, is something I dearly miss.

Although this specific thank you isn’t about either of those scenarios, they are still greatly appreciated. This is about a simple suggestion that led me onto this crazy path, and into an industry I love working in.

I was a kid that loved to tinker and pull things apart, all the way back to my first bike. Anytime an appliance (or lawnmower) died, I was given the opportunity to break it down into every last part with no expectation of ever getting it back to its original state. It was a complete unsupervised free-for-all with my dad’s ratchet set, and by the time I was done, there was no chance they would ever be assembled again…

Then came golf and golf clubs. Just like bikes and skateboards before that, as soon as I got interested in golf and realized clubs could be pulled apart, I did what I always did, immersed myself in research (pre-internet, mind you) and learned everything I could about how they worked and about how you could build them. I read magazine articles and instructional books for any shred of information on how to put golf clubs together, and then one day, I learned about Golfsmith—the now-defunct golf retail chain that started out as a club builder supply. Not only did they offer components to learn with, but you could go to “Club Building School” and learn how to be a real club builder.

In my late teens, I did eventually attend the week-long Master Club Building Program at GolfSmith HQ in Austin Texas, which was managed by non-other than Jeff Sheets—the man behind the famous ’99 Hogan Apex irons, among many other designs, and someone I still call a friend to this day.

But before those week-long trips to Texas in July, it was something more simple: a three-hour course on building a graphite-shafted metal wood, and a steel-shafted iron at the Golfsmith distribution facility in Mississauga, Ontario, just outside of Toronto. If my memory serves me right, it was $149.00, and at the end of the day, I got to take home the 7-iron and 3-wood I built. I’m also sure I bugged my parents for weeks to let me go through the class…

After enough nagging, my persistence paid off, and I booked my day to “go to school.” There was a small shop alongside the industrial storefront that doubled as the component showroom. The class consisted of three enthusiastic golfers including myself eager to learn the tricks of the tradeand the only reason I got there was that my mom sacrificed an entire Saturday to drive her dumpy 14-year-old oldest son the 2.5-hour one-way trip so he could put a couple of clubs together for a few hours.

It was immediately after that when my complete obsession began. I took every club apart I could, just to put them back together, and for a very long period of time, I only ever used Golfsmith component clubs because they gave me the opportunity to build my own sets from scratch. Eventually, I started building clubs for local golfers who noticed I had a knack for fine-tuning clubs, and my experience then led to my first job at a course and then years later during college, working at a big box golf store. From there, I worked for OEMs, and then, thanks to a chance encounter, I ended up managing production at one of the busiest independent club building studios in Canada. Now, I’m very lucky to bring my experience and knowledge to GolfWRX.

Looking back now, I’m certain I would always have a life long passion for golf, thanks to how much I enjoy the game itself, but I’m not sure I would be where I am today if it wasn’t for those eight hours on a Saturday that my mom took to drive me to an industrial park to learn the first steps on the finer details of building a club at Golfsmith.

It’s with that in mind I try and remind myself every day that when our daughter gets older, I need to take the time to help nurture her passions and interests no matter how fleeting they may be, because I have no idea what a few hours out of my day could lead to.

So Mom, thanks for that Saturday.

Happy Mothers Day.

Your Reaction?
  • 16
  • LEGIT0
  • WOW1
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Ryan Barath is part of the Digital Content Creation Team for GolfWRX. He hosts the "On Spec" Podcast on the GolfWRX Radio Network which focuses on discussing everything golf, including gear, technology, fitting, and course architecture. He is a club-fitter & master club builder with more than 17 years of experience working with golfers of all skill levels, including PGA Tour players. He is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop and is a member of advisory panels to a select number of golf equipment manufacturers. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, and share his passion for club building, course architecture and wedge grinding.

Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Opinion & Analysis

Fix your golfing back pain, Step 2: Early stage rehab

Published

on

This article is co-written with Marnus Marais. Since 2011, Marnus has worked with some of the world’s best players on both the PGA Tour and European Tour, helping them to maintain optimal health and peak physical performance. His current stable of players includes Dustin Johnson, Patrick Cantlay, and Louis Oosthuizen, amongst others. 

You can find more information on Marnus and his work at marnusmarais.com

This article is No. 2 in a 4 part series.

Step 1 – The Importance of Assessment

Step 2 – Early Stage Rehab

Step 3 – Essential Strength and Golf Movement Patterns

Step 4 – Building global strength for prevention of future injury

Introduction

Now that we have identified the source of the back issue through assessment, it’s time to start working on the underlying causes, in order to reduce pain and decrease the likelihood of re-injury further down the track. 

In our experience, mechanical back pain in golfers caused by physical issues is most often caused by one or more of the the following 4 issues, with many amateur players displaying the entire collection!

– Lack of Mobility at the Hips and Mid / Upper Back

– Poor Posture

– Misalignment and Muscle Imbalances

– Weak Core Muscles

Because pain is likely still a factor at this stage, we need to proceed with caution and focus on rehab work that is low intensity and has a low risk of causing a pain flare up.

With that in mind, in ‘Step 2: Early Stage Rehab’ we are going to address Mobility, Posture and Misalignment / Muscle Imbalances. These 3 areas can be improved upon, and should have a positive impact on pain reduction, even if back discomfort is still restricting larger, more global movements.

Step 2.1 – Improving Mobility in Hips and Mid / Upper back

Certain areas in the body need to be more stable, and others need to be more mobile. The lumbar spine (lower back) falls into the stable category, partly due to its limited capacity for rotation and lateral flexion (side bending). We know the unnatural golf swing movement imparts both rotational and side bending forces on the spine, so it’s an area we need to keep stable and protected.

In order to avoid excessive low back rotation forces in life and especially in the golf swing, it’s very important that we try to maximize the range of movement in other areas, most notably the joints above and below the low back, where the majority of rotation in the golf swing should take place:

Hips

We need sufficient range of movement to turn into, and out of, both hips. For example, if we can’t turn and load into our lead hip due to a lack of internal rotation mobility, we tend to compensate with excessive rotation and side-bending in the lower back.

Suggested Exercise Circuit – Hip Mobility

1) Self Massage Glutes – 45 secs each side

2) Cross Leg Glute Stretch – 30 secs each side

3) Prone Glute Stretch – 30 secs each side

4) 90 90 Hip Mobility – 5 reps each side

Thoracic Spine (mid to upper back)

Having sufficient rotation in our thoracic spine to both left and the right is extremely important. The thoracic spine has significantly greater rotational capabilities compared to the lumbar spine (low back). If we maximise our mobility here, we can help protect the lower back, along with the cervical spine (neck).

Suggested Exercises – Thoracic Mobility

1) Self Massage Mid / Upper back – 60 seconds

2) Upper Back Extension – 30 seconds

3) All Fours Rotation – 5 reps each side

Step 2.2 – Improving Posture

Posture can be described as the proper alignment of the spine, with the aim of establishing three natural curves (low back, mid/upper back and neck).

The 3 major spinal curves: 1 – Cervical, 2 – Thoracic, 3 – Lumbar

Modern lifestyles and the associated muscle imbalances have pushed and pulled our spines away from those three natural curves, and this has had a damaging effect on our spinal health. Our backs are designed to function optimally from the neutral illustrated above, and the further we get away from it, the more stress we put on our protective spinal structures.

Aside from promotion of pain, poor posture also does terrible things for our golf swings; reducing range of motion in key areas (hips, mid back and shoulders) and creating inefficiencies in our swing action, to give us a double whammy of back pain causes.

The muscles responsible for holding your posture are located deep in the body and close to the spine. Strengthening them can be tricky, as we don’t really have a lot of conscious control over their activation. Hence posture being such a difficult thing to remember! The combination of the 4 exercises featured below help provide the stimulus to those deep muscles that, if trained often enough, will automatically hold your posture in a good position.

Suggested Exercises – Strengthening posture muscles

1) Wall Posture Check – 30 secs

2) Posture Cue – 60 secs

3) Posture Cue Knee Lifts – 10 reps each side

4) Arm Press – 15 reps

Step 2.3 – Fixing Alignment Issues and Muscle Imbalances

Imagine a car with wheel alignment issues; front wheels facing to the right, back wheels facing to the left. Not only will the tires wear out unevenly and quickly, but other areas of the car will experience more torque, load or strain and would have to work harder. The same thing happens to the lower back when we have body alignment issues above and / or below.

For example, if we have short / tight / overactive hip flexors (muscles at the front of the hips that bend our knees to our chest) on one side of the body; very common amongst golfers with low back pain, then this would rotate the pelvis forward on one side, which can create a knock-on effect of imbalance throughout the body.

If the pelvis rotates in one direction, the shoulders naturally have to rotate in the opposite direction in order to maintain balance. Our low back is subsequently caught in the middle, and placed under more load, stress and strain. This imbalance can cause the low back to bend and rotate further, and more unevenly, especially in the already complex rotation and side bending context of the golf swing!

Below is a pelvic alignment technique that can help those with the afore mentioned imbalance.

In the next article; Step 3: Essential Strength and Golf Movement Patterns, we will show you the progression of exercises and key technique principles to build up the strength and movement patterns to return to regular exercise and golf.

If you would like to see how Marnus can help with your golfing back pain, then check out the resources below:

Marnus Marais – marnusmarais.com

If you would like to access training programs designed for elite and recreational players, then check out the following resources and services from Nick at Golf Fit Pro:

Articles
Golf Fit Pro App (iOS)
Online Training
Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP1
  • OB0
  • SHANK0

Continue Reading

Opinion & Analysis

A golfing memoir in monthly tokens: March (belatedly)

Published

on

Editor’s note: All latency on the publishing here is the fault of the Editor-in-Chief.

As some might say, if you don’t take the plunge, you can’t taste the brine. Others might not say such a thing. I’m taking the plunge, because I want to taste the brine.

Here you’ll find the third installment of “A Golfing Memoir” as we trace a year in the life of Flip Hedgebow, itinerant teacher of golf. For January, click here. For February, click here.

Absolutely. Meet me up north (and, to himself, what have I got to lose?)

No sense in putting the cart before the horse, as the old pro used to say, as cirE “Flip” Hedgebow used to ignore. As March came to a close, as cirE locked the pro shop for the last time until November, he took a leap of faith. How big of a leap? Let’s get through March, and find out.

Speaking of carts and horses, March for Flip always came in like a lamb, and went out like a lion. That ran contrary to the folklore but, all things considered, there was always a 50% chance of things running contrary.

No, the best reason for topsy and turvy in March, for Flip, was explained by his birthday. Being born in the middle of the month might suggest balance to some; for him, it was a constant reminder of the chaos that led up to his earthly arrival, tempered only by the madness that ensued. If that’s balance, you can have it.

In Flip’s world, March was about the arrival of the most seasoned of snowbirds, the ones with more than five years of retirement under their growing-shrinking belts. Some were expanding, as they had given up on fitness; the rest were shrinking, as the truest effects of age caught them up. In each case, this pod arrived with military precision, knowing where and when nearly every penny would be spent. No frivolity remained in their schedules, no ambiguity survived from younger, budgeting days. No longer minnows, they recognized that uncertainty stalked them, and that all of their remaining wits needed to center on a small and precise target. The smaller, the more precise, the better…for the women.

Like all men, the old guys appreciated the consistency and precision their wives brought to their worlds.

Like all men, the old guys detested the ever-encroaching, loss of control over their own destinies.

They would enter the pro shop, grab the latest hat like a modern-day Judge Smails, and set it at a rakish angle, atop their sleek domes. Flip learned quite early on that the only way to ensure the sale was cash. When the wives invariably came to complain and demand a refund, Flip could “only” offer a pro shop credit, guaranteeing that something would be purchased. If they bought it on account or on a card, the sale was irretrievably lost.

Flip expected these purchases from his March gam: the cheapest golf balls, when their supply of northern culls ran out; the attire from last fall, or even the previous summer, ready to be shipped back to the manufacturer when March 20th arrived; and some odd or end that the pro had overlooked, lost to some sort of missionary of time. The only thing stronger than the will of the spouse, was the desire of the old guy to make some sort of purchase, to re-establish some semblance of power and control, for at least a moment.

How did you get your name, and why is the last letter, and not the first, capitalized?

(silence. he rarely heard the first question, as everyone knew him as “Flip;” he never heard the second one, as no one paid attention anymore.)

Two stories are a lot to tell. Let’s save both answers, even if it’s just a little while.

(silence. she wasn’t satisfied)

If the red hair caused his eyes to move from the mundane nature of packing and sealing boxes, everything else physical compelled him to put down the tape gun, sense that his throat was dry, know that he would not clear it without a squeak, turn away for a bottle of water, take a swig for lubrication, and, finally, turn back with his finest Axel Foley smile, and greet her with: How long have you been retired?

It was an incalculable risk. There was a 90% chance that she would react with an I’m not that old sort of affront, turn on her heels, and march out the door. There was a 5% chance that she would get the joke, and would stick around for another exchange, before smiling awkwardly and departing. There remained a 5% chance of something else. On this 21st day of March, that final 5% wafted in.

Wafted in, in the guise of a lesson he thought that he had planned. Planned for one of the wives, a late-sixties model whose swing was frozen in time: the unlikely combination of a forward lurch of the torso, a reverse pivot of the feet, and right in the middle, an impossible heave of the hips in one of four unpredictable directions. If anyone were to discover a fifth cardinal point, it would be Agnes Porter. Until this moment, Flip Hedgebow gave thanks that the world was blessed with just one of her; more than one might have tilted the globe off its axis. Now, he offered up a different type of gratitude, thanks to the visage of her granddaughter, who bore no resemblance to the matriarch, beyond the title of Agnes Porter.

They write that a story may be deemed worthy for its inerrant language, or for its compelling events. The story of Agnes Porter the way-younger and Flip Hedgebow benefitted from both, along with an overdose of peripeteia.

 

Artwork by JaeB

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Club Junkie

Club Junkie: Srixon ZX and TaylorMade SIM2 Max fairways and My top 3 drivers!

Published

on

Masters hangover week is here! I have had the new Srixon ZX fairway out on the course and it is underrated as you would imagine. Reshafted the SIM2 Max 3w and it has been super consistent and comfortable. Talking about the top 3 drivers I have been hitting this year.

 

 

 

Your Reaction?
  • 4
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT1
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

WITB

Facebook

Trending