Connect with us

Equipment

Spotted: Chris Kirk with new driver and S200 shafts in irons at Waste Management Phoenix Open

Published

on

Chris Kirk is playing this week at the Waste Management Phoenix Open at TPC Scottsdale and has recently made some interesting changes to his clubs that you don’t generally see from tour players.

The first big change is the driver. Kirk recently switched to the all-new ST200X from Mizuno with a Mitsubishi Chemical Diamana D+ series 60 TX. A change like this seems pretty normal since the ST200X is one of three new drivers released from Mizuno for 2020 and Kirk is a Mizuno staff player. But the ST200X is the lightest, most draw-biased, game improvement driver model in the ST200 series, and it’s not too often you see a tour player fit into a draw-biased club. He also plays in an upright/lower-lofted hosel setting making the driver effectively play around 9.5 degrees.

When we reached out to Mizuno for comment we were told the reason for Kirk’s decision to use the most draw-biased driver in the line was simple “to help eliminate one side of the course.” It’s a common practice by golfers of all skill levels to choose a shot shape of the tee with the predominant option being a fade but in the case of Kirk who prefers to see the ball draw right to left the choice was simple.

The other switch for Kirk is more unusual than the first and that is a full iron shaft swap from ProjectX LZ (Load Zone) to True Temper Dynamic Gold Tour Issue S200.

Tour players are creatures of habit, and when it comes to iron shafts they are one of the last things players tinker with since weight, flex, and balance point can all change the feel of a club.

When asked about the change spotted this week at the WMPO here’s what Kirk had to say.

“For a couple of years now, I used the Project X LZ 6.5 that weighed 125g, and then S200 into my wedges that weigh 127g to keep weight consistent. Then I found I needed something that just spun just a hair more than the Project X LZ but would have the same soft feel.”

“I talked with the Mizuno guys and asked why can’t we just try S200’s throughout the bag? … I put them in and just love the soft feel. They are very similar to an S300 or S400 and it’s hard to tell the difference except for the lighter weight.”

When asked how this change ultimately changed ball flight Kirk replied

“Ideally, in the set from 4-iron through-9 iron I want to see it peaking between 95 and 100 [feet] and these are just perfect, and my spin numbers are right where I want them to be”

With all these setup changes for Mr. Kirk, and a wide-open TPC Scottsdale as the venue for this week’s event, it’s going to be fun to see if they result in a great finish.

Your Reaction?
  • 234
  • LEGIT16
  • WOW12
  • LOL3
  • IDHT0
  • FLOP0
  • OB0
  • SHANK12

Ryan Barath is a club-fitter & master club builder with more than 17 years of experience working with golfers of all skill levels, including PGA Tour players. He is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop and is a member of advisory panels to a select number of golf equipment manufacturers. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, and share his passion for club building, course architecture and wedge grinding.

6 Comments

6 Comments

  1. Scootin'

    Jan 29, 2020 at 3:02 pm

    I once heard that you should play the softest shafts you can control. Having moved from S300 to a Project X LZ 6.0, I can say from personal experience the softer feel is something I love.

  2. DB

    Jan 29, 2020 at 11:43 am

    I have seen at least a few tour players recently moving into a “stiff” iron shaft because it gave them more launch, spin, etc. It makes sense, and I don’t think they can overpower an s200 or s400 the way they would overpower a “stiff” graphite shaft in their woods.

  3. the dude

    Jan 29, 2020 at 10:37 am

    great article…..need more of the “why”…

  4. D

    Jan 29, 2020 at 10:27 am

    It’s so nice to read more quotes from PGA players about why they made the change, especially Chris Kirk talk about numbers, feel, etc. I never would have thought about the S200s having more spin than the LZs. And hopefully this causes more people to test the Mizuno driver.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Limited-edition gear spotted at the PGA Championship

Published

on

The second major of the season is here, and with it, custom gear aplenty! Taking inspiration from both Louisville, Kentucky, and host course Valhalla, the OEMs have been having some fun with the designs.

Check out PGA Championship staff bags, some custom kicks, and a very cool putter grip from SuperStroke.

2024 PGA Championship staff bags

Callaway

Cobra

TaylorMade

Scotty Cameron’s putter cover features the Scotty Dog in Viking helmet

Bettinardi’s KFC-inspired putter covers

Ping’s bourbon-inspired putter cover

Rory McIlroy’s Kentucky Bourbon Trail-inspired Nike Air Zoom Victory Tour 3 shoes

FootJoy x Todd Snyder Mint Julep Premier Series

(Photo courtesy of FootJoy)

Brooks Koepka’s Kentucky Bourbon Trail-inspired Nike Air Zoom Infinity Tour shoes

(Photo courtesy of Nike)

SuperStroke’s PGA Championship grip

Check out all of our photos from Valhalla here.

Your Reaction?
  • 1
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK2

Continue Reading

Whats in the Bag

John Daly WITB 2024 (May)

Published

on

Driver: Ping G430 LST (9 degrees)
Shaft: Newton Motion 6-Dot

3-wood: Ping G430 LST (15 degrees)
Shaft: Newton Motion 4-Dot

Hybrids: Ping G430 (17, 22, 26 degrees)
Shafts: True Temper Dynamic Gold

Irons: Sub70 659-CB (6-PW)
Shafts: True Temper Dynamic Gold S300

Wedges: Sub70 TAIII (50, 54, 60)
Shafts: True Temper Dynamic Gold S300

Putter: Odyssey Ai-One Milled One T CH
Grip: SuperStroke Zenergy Tour 2.0

Grips: SuperStroke custom

More photos of John Daly’s WITB in the forums.

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

Your Reaction?
  • 12
  • LEGIT0
  • WOW1
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Toulon Golf collaborates with Valhalla Golf Club for latest Small Batch putter

Published

on

Toulon Golf has today officially announced its latest Small Batch putter — the Valhalla.

Discussing the putter, Preston Toulon of Toulon Golf said: “This putter is a collaboration with the club at Valhalla and incorporates three of the many things that make the state of Kentucky great – horseracing, bourbon and championship golf. The head of the putter and headcover have several allusions to a jockey’s silk and there are thoroughbreds on the sole.”

Inspired by Toulon’s classic tri-sole Santa Monica design, the company sought to modernize the profile and design leveraging its 904 stainless steel and 6061 aircraft aluminium across the sole. Toulon describes the Valhalla’s profile as “slightly oversized blade whose proportions are meticulously balanced to maintain the look and feel of the Santa Monica, while increasing the putter’s inertia to create one of the most forgiving putters we have ever designed.”

Throughout numerous prototypes, Toulon paid particular attention to the L-neck, with its full shaft of offset, adding a bit of length for better blending with the slightly wider and longer blade.

On the rear of the putter are homages to horse racing in the form of jockey silk diamonds and Churchill Downs-inspired font.

The sole of the putter features a large cavity covered by a 6061 aircraft aluminum sole plate. According to Toulon, this allowed for the addition length to the putter and improved inertia as well as moving more mass to the perimeter for greater forgiveness.

In another nod to Valhalla, Toulon uses a milled watermarked limestone pattern, a reference to stone featured widely on the property.

As with all the Toulon Small Batch putters, the team paid particular attention to the topline thickness and radius to achieve a desired look. “Soft yet crisp was the design intent,” according to the company.

Toulon Golf Small Batch Valhalla specs

  • Material: 904L Stainless Steel/6061 Aluminum Sole
  • Face Mill: Fine Double Fly with Big Tuna
  • Finish: Kentucky Bourbon PVD
  • Grip: Custom Toulon Collection Vintage Blue Pistol
  • Shaft: Chrome Stepless Steel
  • Headcover: Valhalla Custom Leather
  • Head Weight: 355 g
  • Toe Hang: 40 degrees
  • Loft: 3 degrees
  • Lie: 70 degrees

Pricing and availability

The Small Batch Valhalla is available for purchase today via the company’s website — ToulonGolf.com.

Supply is extremely limited. The price is $1,800.

Your Reaction?
  • 1
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

WITB

Facebook

Trending