Connect with us

Equipment

New Honma TR20 460 and TR20 440 drivers launch for 2020

Published

on

Honma has introduced its two new driver additions for 2020—the TR20 460 and TR20 440.

The TR20 460 (used by Honma ambassador Justin Rose) is a full profile driver deeper front to back with a swept crown designed for confidence and playability, while the TR20 440 is a compact profile that sits higher in the back for a traditional appearance.

Honma TR20 460 driver

Honma TR20 440 driver

Speaking on the new drivers, Honma President John Kawaja stated

“TR20 drivers are a feat of engineering craftsmanship from our incredibly talented teams in Sakata and Carlsbad. Combining innovative carbon construction with the legendary shaping of our takumis in Japan is something we’re very excited for golfers to experience.”

Honma TR20 460 driver

TR20 460

Both new additions from Honma feature a nearly total carbon body and a fast TiCarbon Fast Frame.

The TiCarbon Fast Frame combines an ultra-lightweight ET40 carbon crown from Toray Composites with a carbon sole on a highly optimized titanium frame designed to provide maximum speed and weight efficiency.

A unique vertical groove face works with the Ti frame and carbon body in a bid to deliver speed, and three strategically located and adjustable sole weights seek to provide flight and playability preference for increased MOI, reduced spin, or more draw bias.

Honma TR20 460 driver

TR20 460

The non-rotating hosel on the two new driver additions from Honma allows the clubhead to be adjusted +/- 1.5 degrees in face angle, +/- 1 degree in loft, and +/- 1 degree in lie angle without changing the orientation of the shaft in a design for more consistent performance and impact delivery.

Honma TR20 460 driver

TR20 460

Honma’s TR20 drivers are engineered with the brand’s VIZARD shafts, designed to provide a better whole club in 50, 60, and 70-gram options with different EI profiles to meet the distance needs of golfers with different swing speeds and shaft loading tendencies.

Honma TR20 460 driver

TR20 440

Honma’s TR20 460 and TR20 440 drivers are available for fitting in February and at retail in March and cost $649.99.

 

Your Reaction?
  • 59
  • LEGIT10
  • WOW10
  • LOL4
  • IDHT0
  • FLOP5
  • OB2
  • SHANK12

Gianni is the Assistant Editor at GolfWRX. He can be contacted at [email protected] Follow him on Twitter @giannimosquito

5 Comments

5 Comments

  1. H

    Jan 20, 2020 at 9:05 pm

    Honma’s clubs look great this year. Shame they’re Honma lololololol

  2. Brendan

    Jan 20, 2020 at 7:25 pm

    Substantially over priced, but other than that it looks interesting.

  3. Speedy

    Jan 20, 2020 at 12:43 pm

    Too pricey.

  4. BJ

    Jan 20, 2020 at 10:03 am

    That adjustment system is terrible!!!! by far the worst on the market

  5. Eric

    Jan 20, 2020 at 9:37 am

    I like the looks of this driver. Very clean with lots of tech.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

James Ingles resurrects custom putter brand

Published

on

Everybody loves a comeback story. Ben Hogan post-1949. Tiger Woods post-2009. You remember the first act and are now given a glimpse at what a second act could become. It’s a chance to reimagine and build on success. While the reason James Ingles Putters has been placed on hiatus for the last five years isn’t exactly “rock and roll,” they are indeed back on the market and ready to deliver. If you’re in the dark on James Ingles Putters’ history and/or why they’re back, here’s the story…

James Ingles started playing golf when he was 14 years old in 1997, which was an exciting time in golf, especially in the world of equipment and putters more specifically. Around that time, he purchased a special edition Scotty Cameron putter, which was inspired by David Duval, who was his favorite player at the time. He rushed home excited to show the new flatstick to his dad. His dad proceeded to look it over and sort of brushed it off as just a machine-made, milled steel putter. There were probably thousands of others just like it.

Heel-shafted blade 28g James Ingles Putter made from a copper alloy called Coldur A

That may be a curious reaction to most people, but as it turns out, James’ father has a unique frame of reference for this sort of thing. At that time in 1997, he happened to own Charles Hellis & Sons, a bespoke gunsmith in the London area (about 18 months ago he sold the business and retired). In his trade, no two items are alike. They begin with a quality forging and are then finished by hand to the customer’s specific requests. Shotguns from makers in and around London are known all over the world for their craftsmanship and attention to detail. It also happens that a lot of the steps in the gun making process actually transfer quite well to making putters.

In 2009, James approached the head gunsmith at Hellis and asked him if it was possible to make a putter in-house. That conversation started the development of James’ first putter, an 8802-style blade known as his 28g model. James uses the same forging house as Charles Hellis, which has been in business since 1904 and served many industries over the years. Hand engraving, when requested by the customer, is done by independent third-party engravers who also serve the local shotgun industry.

“I’d been around Hellis since my early teens, so I had at least seen and therefore had an appreciation for the machining and hand engraving that goes into shotgun manufacturing.  I spent a lot of time on the aesthetics of that first putter because I really wanted to get that right.  We knew there was going to be a fair amount of handwork involved in finishing the putter after the forging, but ensuring the overall shape of that forging was absolutely critical.”

Custom heel-toe weighted blade putter with hand engraving from James Ingles Putters

It’s worth taking a quick pause to point out an important distinction. There are loads of high-quality CNC milled putters today, which are milled by a computer to exacting tolerances from a 3D CAD model (think Tyson Lamb, Logan Olson, and the like). The “old fashioned” way many putter makers (such as T.P. Mills and his contemporaries) would have crafted their putters would have been start-to-finish on a hand-operated milling machine. One of the things that sets James’ putters apart is that they are first forged into a rough shape (not dissimilar to the way many forged irons are made) and then milled by hand into the finished product. This isn’t to say one method is objectively better or worse than another, only that they perhaps may arrive at a different result and may be for different customers.

“When we first came to market, everything we sold was direct to the consumer.  The golf industry was quite different in those days, so if you wanted to be competitive, you had to keep cost and margins as low as possible.  Then we started to partner with Scratch in 2013, which made sense for a lot of reasons.  Essentially, Scratch would work with the customer to define specifications and such.  They would send us that information and we would make the putters.  When Scratch went under in 2015, there were a host of other things going on in my life, though.  My first child had just been born and I had a full-time career as well, so going back to the way things were didn’t make sense.  I didn’t have the capability to have everything go directly through me anymore, so we made the decision to kind of shut things down for a while.”

Custom James Ingles Putter Covers

For the last five years, James’ life has mainly been focused on raising his two young kids and making a living as a building surveyor. By his own admission, he hadn’t even been playing much golf and had instead taken up long-distance running. Then, the COVID-19 pandemic started taking hold, and he started to introduce his now-five-year-old son to golf.

“We had gone to the driving range and Jude was having lots of fun hitting golf balls.  I also started to realize I could actually find the middle of the club face every now and again, so that was promising.  I then took him to the local pitch-and-putt and all of a sudden, all of my enjoyment for golf really just started flooding back.  I started an Instagram account for the golf business [@jamesinglesputters by the way] and posted pictures of Jude and I playing and also pictures of old putters I’d found lying around my garage.  Loads of people started commenting and messaging and it just felt like there was some unfinished business there.  Ultimately, I suppose that’s why we’re launching the business again and you and I are having this conversation.”

James Ingles putters have two main forgings that they can work from: the aforementioned 28g and also the 12g, a traditional heel-toe weighted blade design which can be finished in a number of ways depending on the customer’s preference. They are also capable of milling custom shapes from billet steel.  In addition to putters, James will be doing many small runs of accessories such as putter covers, ball markers, and divot tools.  All information can be found on his new website.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Callaway announces huge all-stock merger deal with Topgolf

Published

on

Callaway Golf has announced an all-stock merger agreement with TopGolf with the number of shares to be issued based upon an implied equity value of Topgolf of approximately $2 billion – including the 14% already owned by Callaway.

Callaway first invested in the golf entertainment company, Topgolf, back in 2006 entering an exclusive golf partnership agreement at all Topgolf venues.

 

On the new deal expected to be completed in early 2021, Chip Brewer, President and Chief Executive Officer of Callaway said that the all-stock merger between the two can create “an unrivaled golf and entertainment business”.

“Together, Callaway and Topgolf create an unrivaled golf and entertainment business. This combination unites proven leaders with a shared passion for delivering exceptional golf experiences for all from elite touring professionals to new and aspiring entrants to the game. We’ve long seen the value in Topgolf and we are confident that together, we can create a larger, higher growth, technology-enabled global golf and entertainment leader.”

Under the terms of the merger agreement, Callaway will issue approximately 90 million shares of its common stock to the shareholders of Topgolf, excluding Callaway, which currently holds approximately 14% of Topgolf’s outstanding shares. Upon completion of the merger, Callaway shareholders will own approximately 51.5%, and Topgolf shareholders (excluding Callaway) will own about 48.5% of the combined company on a fully diluted basis.

Topgolf’s revenue for 2019 was approximately $1.1 billion, and the company currently has 63 locations worldwide, including 58 in the U.S., and has more than 23 million customers. Find out all about Topgolf here.

Your Reaction?
  • 39
  • LEGIT3
  • WOW8
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK3

Continue Reading

Equipment

What irons are left-handers playing? – GolfWRXers discuss

Published

on

In our forums, our lefty members have been dishing on the irons currently in their bag. WRXer ‘1221’ is in the market for a new set and wants to see what other left-handers have been finding success with, and our members have been sharing their clubs in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • dclccoritti: “Titleist…all blades. Love the look of the new TM P7-CB’s.”
  • LeftyMatt24: “I’m in T100s bent weak. They are an awesome middle ground between blades and players. Titleist offers their full line in left and right-handed. The new SEL from Mizuno is a good option. Can’t go wrong with Srixon z785 either.”
  • The_Champ: “Ping Blueprint.”
  • Llefty: “Srixon 585 3-PW and Bridgestone JGR Tour B HF2 5-AW.”

Entire Thread: “What irons are left-handers playing?

Your Reaction?
  • 2
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP1
  • OB0
  • SHANK3

Continue Reading

WITB

Facebook

Trending