Club Building 101: Pulling a shaft from a bonded driver
Even though most modern drivers have some sort of adapter, there are still many times when you have to pull a shaft from a fully bonded head whether it be a driver, fairway wood, or hybrid. With bonded heads, you have to be careful with a few things including using the right amount of heat, where to focus it, and properly using your tools.
- LIKE11
- LEGIT1
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK14
- Wesley Bryan what’s in the bag accurate as of the CJ Cup Byron Nelson.
Driver: Callaway Paradym Ai Smoke Triple Diamond Max (9 degrees @10)
Shaft: Mitsubishi Diamana GT 50 TX
3-wood: TaylorMade Stealth Plus (15 degrees)
Shaft: Mitsubishi Diamana GT 60 X
Hybrid: TaylorMade Stealth 2 Plus Rescue (19.5 degrees)
Shaft: Fujikura Ventus HB Blue 8 X
Irons: Titleist T200 (4), Takomo 101U (4), Takomo 101T (5), Takomo 301 CB (6-9)
Shafts: True Temper Dynamic Gold Tour Issue X100
Wedges: Titleist Vokey Design SM10 (46-10F, 52-08F, 56-14F), Titleist Vokey Design WedgeWorks Proto (58-A)
Shafts: True Temper Dynamic Gold Tour Issue S400
Putter: L.A.B. Golf DF3
Grips: SuperStroke, Golf Pride Tour Velvet
Ball: Titleist Pro V1x
More photos of Wesley Bryan’s WITB in the forums.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Editor’s note: This is an excerpt from a piece our Andrew Tursky originally wrote for PGATour.com’s Equipment Report. Head over there for the full article.
…Flash forward to THE CJ CUP Byron Nelson 2024 at TPC Craig Ranch in Texas, and Bryan is still playing with a mixed Takomo set, except he’s added a new 101 U 4-iron, plus a Titleist T200 4-iron, and he’s dropping his 5-iron.
That bears repeating: Bryan is switching to an iron setup that consists of two 4-irons and no 5-iron.
On paper, that looks wrong, but when you look at yardage gapping instead of the number on the sole of the iron, things start to make more sense.
As Bryan explained to GolfWRX.com on Tuesday in Texas, his Takomo 301 CB 6-iron goes about 195-200 yards. Then, his new hollow-bodied Takomo 101U Driving Iron, which he recently started testing “a couple weeks ago” and bent about 2 degrees weak, goes about 220 yards, and the Titleist T200 4-iron goes about 235 yards.
Speaking on his new Takomo 101U Driving Iron, which sells for $119, Bryan had this to say:
“It’s super forgiving and launches high, and it has a bit longer of a profile to where it looks really good,” said Bryan. “If people are willing to play something that doesn’t have an expensive price tag on their club…[I started testing it] in the last couple weeks and it’s in the bag.
“I just made it like 2 degrees weaker. Basically that gap from 205 to 225 I was in a little bit of a dead space, so I’m going to try and fill that gap better.”
Check out Wesley Bryan’s full WITB here.
Read the rest of the article at PGATour.com.
- LIKE5
- LEGIT3
- WOW1
- LOL2
- IDHT1
- FLOP0
- OB0
- SHANK0
In our forums, our members have been discussing players irons. WRXer ‘NorthTXGolf’ is on the hunt for some new irons but is putting a priority on forgiveness, and has reached out to fellow members who have been sharing their thoughts and advice on the subject in our forum.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- Sam217: “i230 has got to be one of the most forgiving players irons available. Cobra King Tour another. Don’t sleep on the New Level 480 DB coming out soon.”
- RangeBaller: “ZX5/ZX7 and i230 should definitely be in your testing pool.”
- YAMS49: “Another I210 homie here… Very highly recommended if you want/need spin and a consistent yardage.”
- golf-RN: “I second the Cobra King Tour irons. I am not the greatest ballstriker by any stretch of the imagination and I find the King Tours very forgiving. Toe strikes might lose 5 or 6 yards with no directional loss. You definitely feel the miss though lol but mishits from the center aren’t punished too hard regarding distance.”
Entire Thread: “Most forgiving Players irons? – GolfWRXers discuss”
- LIKE1
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
-
19th Hole1 week agoJustin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole1 week ago‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole3 weeks agoTwo star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole2 weeks agoReport: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole2 weeks agoNeal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole2 weeks agoBrandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
-
Equipment3 weeks agoWhat we know about Bryson DeChambeau’s 3D-printed Avoda irons
-
19th Hole6 days agoLET pro gives detailed financial breakdown of first week on tour…and the net result may shock you
Ryan Michael
Mar 10, 2019 at 12:27 pm
It’s 2019 how about successfully pulling an adapter from a shaft! Many would be surprised at how precise you need to be in pulling it out perfectly straight to protect the shaft fibers on top of applying the heat just right. Not an easy job!
Gunter Eisenberg
Mar 9, 2019 at 12:38 pm
Shaft pulling from Woods is becoming a lost art because of the adjustable adapters.
2putttom
Mar 9, 2019 at 11:45 am
outstanding job. Make me wanna buy a new puller.
Tim S
Mar 9, 2019 at 10:58 am
Would be really cool if you did bore thru removal….Callaway, Titleist 905 and 906 series. Bore thru us much more intriguing. Good video though.
MollyDooker
Mar 9, 2019 at 10:29 am
Removing a shaft because the ferrule didn’t fit correctly. LOL. Now I know I’m not the only one. Thanks!
Tom
Mar 20, 2019 at 9:42 am
Why not just buff the ferrule enough to be even with the club hosel?
Merde
Mar 9, 2019 at 9:24 am
Seriously can we get rid of this guy
He’s not fit to be talking
Rod C
Mar 10, 2019 at 3:43 pm
Another tiresome comment of no constructive value at all! Frankly, I found the video informative and useful and that’s what matters. Let me ask you this, what have you done to help others or do you just criticise?