Equipment
Spotted: In-hand photos of the new Ping i500 irons
First, we spotted Tony Finau testing out an unidentified Ping utility iron that was rumored to be the new i500 by GolfWRX Forum members. Then, we learned that Ping’s Director of Product Design Marty Jertson used “Ping i500” long irons to qualify for the 2018 PGA Championship.
Now, we have in-hand photos of the Ping i500 irons in our forums. It’s now clear that this will be a full set of clubs, not just utility irons. It also appears, judging by the screw in the toe of all the irons pictured, that the irons will have a hollow-bodied construction throughout the set.
Check out photos of the 7 iron below, and check out photos of all the irons we photographed in the forum thread.
Ping i500 7-iron
Click here for more photos and discussion.
- LIKE773
- LEGIT55
- WOW91
- LOL11
- IDHT11
- FLOP10
- OB8
- SHANK31
- Steve Stricker WITB accurate as of the Zurich Classic. More photos from the event here.
Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X
3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX
Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X
Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5
Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore
Putter: Odyssey White Hot No. 2
Ball: Titleist Pro V1x
Grips: Golf Pride Tour Velvet Grip Rite
Check out more in-hand photos of Steve Stricker’s clubs here.
- LIKE17
- LEGIT2
- WOW0
- LOL0
- IDHT1
- FLOP0
- OB0
- SHANK0
- Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X
Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX
Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)
Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X
Putter: Bettinardi SS16 Dass
Grips: Golf Pride MCC
Check out more in-hand photos of Alex Fitzpatrick’s clubs here.
- LIKE8
- LEGIT0
- WOW0
- LOL0
- IDHT1
- FLOP0
- OB0
- SHANK0
In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
- driveandputtmachine: “Still playing a MIni 300. The head was only 208, so I ordered a heavier weight and play it at 3 wood length. I am playing a Ventus Red 70. I play 70 grams in my fairways. I use it mainly to hit draws off the tee. When I combine me, a driver, and trying to hit a draw it does not work out well most of the time. So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck. The 300 Mini is very good off the deck.”
- JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”
Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”
- LIKE5
- LEGIT1
- WOW0
- LOL0
- IDHT1
- FLOP0
- OB0
- SHANK4
Dave Portnoy places monstrous outright bet for the 2024 Masters
John Daly stuns fans into silence with brutal opening tee shot on PGA Tour Champions
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
Two star names reportedly blanked Jon Rahm all week at the Masters
2-time major champ announces shock retirement from the sport at age of 33
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
Steve Stricker WITB 2024 (April)
Steve Stricker WITB accurate as of the Zurich Classic. More photos from the event here. Driver: Titleist TSR3 (9 degrees, C4...
Alex Fitzpatrick WITB 2024 (April)
Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic. Driver: Ping G430 LST (10.5 degrees) Shaft: Fujikura...
Alejandro Tosti WITB 2024 (April)
Alejandro Tosti what’s in the bag accurate as of the Zurich Classic. Driver: Srixon ZX5 Mk II LS (9.5 degrees...
Drew Brees WITB 2024 (April)
View this post on Instagram A post shared by GolfWRX (@golfwrx) Driver: TaylorMade Stealth 2 Plus (10.5 degrees)...
-
19th Hole2 weeks agoDave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole5 days agoJustin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole3 weeks agoTiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole5 days ago‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks agoTwo star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole2 weeks agoReport: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole2 weeks agoNeal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole1 week agoBrandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
rex235
Aug 9, 2018 at 4:13 pm
Let us know if and when a LH i500 model shows up…
Mike
Jul 28, 2018 at 9:18 am
Don’t understand the Ping strategy. G400, G700, I500, I210, I700, etc. And the prices are sky-high, ESPECIALLY re the G700. As a mid-handicapper, am I really going to spend $1,200 for a set of irons? What will these do that the previous G-Max irons can’t do (& they can now be had for half the cost).
Mat
Aug 9, 2018 at 5:42 pm
You think $1200 is a lot for irons? And why not wait so you can have these for ‘half the cost’?
If you hit the G700 and the i500, you’ll know immediately that they are very, very different clubs.
mizuno29
Jul 14, 2018 at 11:18 am
Remember the Anser irons? They were 8620, the body of this iron is 17-4, the face is 8620. I’ve hit this club, got a set on order, they are $162.50 per with the graphite Recoil shaft, they have all the same playing characteristics that the G 700’s have without all that offset, but you can control the trajectories with these and the 700’s you couldn’t. Hollow club design is the future of irons, makes the face hotter, launches higher, and produce very little spin. Great job Ping!
Mmmmooooo
Jul 13, 2018 at 1:50 am
Hit it. Feels and sounds terrible. Very hollow and cracked sounding. Need foam in it lmao
David
Aug 7, 2018 at 5:50 pm
Came to the exact opposite conclusion. Love the feel and sound.
jc
Jul 2, 2018 at 4:28 pm
one thing for sure…they will be longer, higher, straighter and more accurate..might as well throw your old stuff out or donate to kids.
Mike
Jul 13, 2018 at 8:17 am
And they’ll probably be on about $160+ a club. (refer to G700)
Austin
Jul 1, 2018 at 12:57 am
It is a hollow body full set. Also coming out with new i210s that look and feel good
george
Jul 1, 2018 at 10:46 pm
…. look and feel good when you grab the club in your hand and rub it down….
Captain Obvious
Jun 30, 2018 at 12:13 pm
Clearly says forged for people who comment without actually looking at the pictures…. ????
Caroline
Jun 29, 2018 at 11:21 pm
Any one else find the lie angle on Pings getting changed after a few rounds on these hard summer fairways? I guess the notch in the hosel makes them easier to bend?…I had my short iron lies corrected a month ago and today I had them checked and two of them were off enough to be reset again???
dilly dilly
Jun 30, 2018 at 1:15 am
Most Pings are cast and don’t bend at all.
Tom
Jul 1, 2018 at 12:27 pm
cast stainless is difficult to adjust. Ping knew this and addressed this with the hosel notch.
Steve Buchanan
Jul 9, 2018 at 11:54 am
Of course they bend. Even the old Ping Eye 2 Irons were bendable. They did it at the factory as one of the last steps. That is how they adjusted to the correct lie. They didn’t have different castings for the different lies. The irons were pounded by a mallet into the correct lie and then the dot was painted to show which lie it was as the last step.
Swing Dr
Jul 1, 2018 at 7:11 am
Impossible. The guy checking them probably doesn’t have his machine calibrated correctly. Send them back to Ping for loft/ lie and put your mind at ease.
calc
Jun 29, 2018 at 7:21 pm
Drink GOLFERAID …. there’s a swing in every can …. 😮
ogo
Jun 30, 2018 at 3:08 pm
LOL 😀
Tom
Jun 29, 2018 at 6:58 pm
That iron has 7 less screws in the head than PXG…..lol!
Tom
Jun 29, 2018 at 5:46 pm
PING clubs are the most copied of all time and have brought the most innovations to the industryratepayers by far. They are engineers, it’s the others who copy.
i500 is a beauty to behold.
Jeffrey Anderson
Jun 29, 2018 at 10:54 pm
Stan Thompson had ‘‘tthis design in the 60’s -70’s
Less the hotel ….
Great looking iron
Milo
Jun 29, 2018 at 3:11 pm
Doesn’t look to bad honestly.
Marklar
Jul 12, 2018 at 2:50 am
*too
HDTVMAN
Jun 29, 2018 at 3:07 pm
These are hollow and not “gel” filled. I have the G700’s and the ball “flies long and high” off the face. The i500 is designed for the low-digit handicap player. The new designs are great looking and perform beautifully, construction is based on Ping driver, fairway, and hybrid construction.
calc
Jun 29, 2018 at 7:12 pm
So the toe port is for variable weighting and the rest of the head is solid? Okay, I suppose that’s better than lead tape but why only the toe?
Swing Dr
Jun 29, 2018 at 7:30 pm
Good question. There is a matching screw hidden in the hosel for heel-toe balance.
Travis
Jun 30, 2018 at 10:18 am
If they can drill out a section and put heavier weight in the toe it will move COG more towards the middle of the face instead of being heel biased.
Noa Idea
Jul 4, 2018 at 9:34 pm
the g700’s have a lot of good points, but they are way too loud at impact. Hope the i500’s have sorted that issue.
MuskieCy
Jun 29, 2018 at 2:15 pm
They are all copying the Adams XTD forged irons from 2014.
Forged face, hollow urethane-filled bodies.
Wiger Toods
Jun 30, 2018 at 3:34 am
Not even close. Cavity is much bigger in the 500.
calc
Jun 29, 2018 at 1:51 pm
Looking at the i500 toe, is that a weight port or is it a jello-elastomer port… like TM and PXG ??!!!
DougWilsonsSlapper
Jun 29, 2018 at 11:45 am
Countdown to “their copying TM who’s copying PXG” and “these aren’t forged” and “Ping are ugly” and “thick topline” in 3…2…1…
JJD
Jun 29, 2018 at 1:13 pm
Yeah but, I don’t think these are forged. And, everyone knows they are just copies of TM and as you know, they copy PXG. But we all know PXG copies Tommy Armour.
Marooned
Jun 29, 2018 at 2:35 pm
No. PXG copied TaylorMade. In the year 1993 TM put foam in the Burner midsize irons. In 1993 PXG did not even exist.
That’s why PXG lawsuit never go anywhere, seemed just like a poor PR stunt from PXG to be honest since it’s pretty easy to look it up beforehand…
Tim Armington
Jun 29, 2018 at 11:30 am
Really like it!!! What is the difference between the i500 and the i210?
calc
Jun 29, 2018 at 1:45 pm
That’s easy….. i500 minus i210 = i290 …. 😮
Chuck Barkley
Jun 29, 2018 at 3:07 pm
One’s a race track in Indy, and the other is a freeway in Los Angeles!!! Hahahaha!!! Yuk yuk!! I should’a been a comedy guy.
Anthony Williams
Jul 3, 2018 at 12:40 am
lol
2putttom
Jun 29, 2018 at 10:57 am
I’ll give em’ try
calc
Jun 29, 2018 at 1:53 pm
… sure you will Karsten Jr. ….!!!!
2putttom
Jun 29, 2018 at 4:19 pm
calc ! ya bald headed wombat where ya been … are we still on for Monday?
The dude
Jun 29, 2018 at 10:50 am
They look great……but printing Forged on the back of the cast club is a bit misleading (I know….marketing has their hook for gullible wannabe players)
Brooky03
Jun 29, 2018 at 11:34 am
How do you know it’s not forged? You can forge multiple pieces of the club and weld them together. That’s still a forged club. It’s possible just the face is forged and the body of the clubs are cast, but you can’t know that from the pics.
calc
Jun 29, 2018 at 1:47 pm
Ping and other golf club companies who claim their clubs are “forged” are scamming gullible golfers… they’re more like “forgeries”… 😉
calc
Jun 29, 2018 at 1:50 pm
… not “forged”…. “forgeries” ….. 😮
Travis
Jun 30, 2018 at 10:20 am
Titleist AP2’s are only a forged face, they call them “forged”, nobody seems to complain about that….