Connect with us

Equipment

ER9-10K: Evnroll adds an ultra-high MOI putter to its lineup

Published

on

Evnroll founder Guerin Rife saw the high-MOI mallet trend in professional golf and decided to raise the bar (appropriate, given his historical fondness for bars on his putters). Enter the ultra-high MOI ER9-10K Extreme mallet.

“I noticed more and more lately that many players on the PGA Tour are opting for high MOI oversized putter head designs,” Rife says. “They have to stand over a 4-foot putt worth $200k to $1m that will change their life. The pressure can be paralysing.”

According to the company, the highest MOI putters on the market are in the 5,000 range. As you might guess from the name, the ER9-10K has an MOI of 10,000.

In other words, as Guerin Rife says

“The ER9-10K is stability on steroids!”

To keep overall size down, the ER9 has milled 6061 aluminium body with hollow cylinders that run along the length of the head where steel weights are inserted. A range of short and long rod weights can be plugged in to dial in swing weight based on shaft length, grip weights and counter weights.

The ER9-10K also features Evnroll’s “Sweet Face” Technology: a unique mill pattern engineered to deliver uniform performance across the entire hitting area of the putter.

Additionally, the grip is geared toward enhancing MOI. The patent-pending Gravity Grip features a 70g, 10-inch steel rod that travels the full length of the deep V underside of the grip. This places 85 percent of the grip’s total weight in the fingers below the shaft, promoting a toe-up square face to the swing plane. At 120 grams, the Gravity Grip also acts as a counter weight.

The ER9-10K Extreme mallet will be available in three head weights according to shaft length (33 inches at 415 grams; 34 inches at 400 grams; 35 inches at 385 grams) with hosel options of either plumber neck or short slant neck.

The ER9-10K mallet extends the full Evnroll product range to 11 models for 2018. Starting spring of 2018, all new models will join the existing product line-up, available in 33, 34 and 35-inch lengths with an MSRP of $329 for the ER1, ER2, ER2cs & ER3 and $359 for the ER1.2, ER5, ER6, ER7, ER7cs, ER8 & ER9.

See what GolfWRX members are saying about the 10K putters here.

Your Reaction?
  • 94
  • LEGIT6
  • WOW5
  • LOL0
  • IDHT0
  • FLOP1
  • OB0
  • SHANK10

GolfWRX Editor-in-Chief

6 Comments

6 Comments

  1. peter collins

    Feb 4, 2018 at 2:42 pm

    If the Putter, works better for you, than the one in your bag, and you can afford it buy it simples.
    If it works for you forget the mathematics and logarithms of how it was achieved.

  2. orv

    Feb 3, 2018 at 1:49 pm

    Only a desperate deluded hacker would want this pile/piece of junk. No tour pro would play this abomination unless paid-to-play. Stooopid …!!!!

  3. OB

    Feb 1, 2018 at 4:58 pm

    ER9 putter head = 400 grams
    Gravity Grip = 120 grams
    Steel shaft = 120 grams
    Total weight = 640 grams = 22.57 oz. = 1.4 pounds ….!!!!
    Golf ball = 1.62 oz..
    Ratio of putter weight to ball weight = ~14:1 :-O 😮 :-O

  4. mike

    Jan 31, 2018 at 6:44 pm

    “The ER9-10K Extreme mallet will be available in three head weights according to shaft length (33 inches at 415 grams; 34 inches at 400 grams; 35 inches at 385 grams)…”
    33 x 415 = 13,695 gram-inches
    34 x 400 = 13,600 gram-inches
    35 x 385 = 13,475 gram-inches
    All about the same first moment about the handle end … 😮

    • mike

      Jan 31, 2018 at 6:55 pm

      Oh… and the putter weighs nearly a pound (~15 oz.) which should be adequate to overwhelm a 1.68 ounce ball… but maybe it’s too heavy to swing back and stroke forward with a soft finger grip. Maybe it requires a strong ham-fisted grasp to keep under control while torquing otherwise the pendulum stroke will break down and go out of control…. ya think?!! 😀

      • OB

        Feb 1, 2018 at 11:05 am

        High MOI is good for off-center miss-hits on the putter face, but it’s the enemy of the putting stroke because of weight imbalance in the hands. If you hit the ball on the putter sweet spot and +/- 1/2″ the excessive MOI is useless.
        If you have an unstable putting stroke the high MOI is your enemy because it will further destabilize your putting stroke. You will lose control of the putter, plain and simple.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Steve Stricker WITB 2024 (April)

Published

on

Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X

3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX

Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X

Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5

Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore

Putter: Odyssey White Hot No. 2

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet Grip Rite

Check out more in-hand photos of Steve Stricker’s clubs here.

Your Reaction?
  • 18
  • LEGIT2
  • WOW0
  • LOL0
  • IDHT1
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Alex Fitzpatrick WITB 2024 (April)

Published

on

  • Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic. 

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X

Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX

Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)

Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X

Putter: Bettinardi SS16 Dass

Grips: Golf Pride MCC

Check out more in-hand photos of Alex Fitzpatrick’s clubs here.

Your Reaction?
  • 10
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT1
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss

Published

on

In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
  • driveandputtmachine: “Still playing a MIni 300.  The head was only 208, so I ordered a heavier weight and play it at 3 wood length.  I am playing a Ventus Red 70.   I play 70 grams in my fairways.  I use it mainly to hit draws off the tee.  When I combine me, a driver, and trying to hit a draw it does not work out well most of the time.  So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck.  The 300 Mini is very good off the deck.”
  • JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”

Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”

Your Reaction?
  • 5
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT1
  • FLOP0
  • OB0
  • SHANK4

Continue Reading

WITB

Facebook

Trending