This video includes a step-by-step guide and some some tips on how to safely and properly remove an adapter from a graphite golf shaft, along with the tools required. Leave your requests for more “how-to” club building tutorials in the comments below, or Tweet them @RDSBarath.
- LIKE25
- LEGIT3
- WOW0
- LOL1
- IDHT0
- FLOP1
- OB1
- SHANK15
Rory McIlroy WITB
Driver: TaylorMade Qi10 (9 degrees @8.25) Buy here.
Shaft: Fujikura Ventus Black 6 X (45 inches)
3-wood: TaylorMade Qi10 (15 degrees) Buy here.
Shaft: Fujikura Ventus Black 8 X
5-wood: TaylorMade Qi10 (18 degrees) Buy here.
Shaft: Fujikura Ventus Black 9 X
Irons: TaylorMade Proto (4), TaylorMade Rors Proto (5-9) Buy here.
Shaft: Project X 7.0 (4-9)
Wedges: TaylorMade MG4 (46-09SB, 50-09SB, 54-11SB) Buy here, Titleist Vokey Design WedgeWorks (58-K @59) Buy here.
Shafts: Project X 6.5 (46-54), Project X 6.5 Wedge (60)
Putter: TaylorMade Spider Tour X3 Buy here.
Grip: SuperStroke Zenergy Pistol Tour
Ball: 2024 TaylorMade TP5x Buy here.
Grips: Golf Pride MCC
Check out more in-hand photos of Rory McIlroy’s WITB in the forums.
View this post on Instagram
Shane Lowry WITB
- Shane Lowry what’s in the bag accurate as of the Cognizant Classic.
Driver: Srixon ZX5 Mk II (8.5 degrees) Buy here.
Shaft: Mitsubishi Diamana D+ White 70 TX
5-wood: TaylorMade Stealth Plus Buy here.
Shaft: Graphite Design Tour AD DI 8 X
Irons: Srixon ZX Utility (3, 20 degrees) Buy here, Srixon ZX5 Mk II (4, 5) Buy here, Srixon ZX7 Mk II (6-PW) Buy here.
Shafts: Nippon N.S. Pro Modus3 Tour 120 X (3), KBS Tour 130 X (4-PW)
Wedges: Cleveland RTX 6 ZipCore Tour Rack (50-10 MID, 54-10 MID) Buy here, Cleveland RTX Full Face (58-8) Buy here.
Shafts: KBS Tour Wedge X Black
Putter: TaylorMade Spider Tour Z Buy here.
Grip: SuperStroke Zenergy Pistol 1.0
Grips: Golf Pride Tour Velvet
Ball: Srixon Z-Star XV Buy here.
The winning WITB is presented by 2nd Swing Golf. 2nd Swing has more than 100,000 new and pre-swung golf clubs available in six store locations and online. Check them out here.
- LIKE10
- LEGIT1
- WOW1
- LOL2
- IDHT1
- FLOP0
- OB0
- SHANK1
- Steve Stricker WITB accurate as of the Zurich Classic. More photos from the event here.
Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X
3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX
Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X
Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5
Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore
Putter: Odyssey White Hot No. 2
Ball: Titleist Pro V1x
Grips: Golf Pride Tour Velvet Grip Rite
Check out more in-hand photos of Steve Stricker’s clubs here.
- LIKE30
- LEGIT2
- WOW0
- LOL1
- IDHT1
- FLOP0
- OB0
- SHANK1
- Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X
Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX
Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)
Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X
Putter: Bettinardi SS16 Dass
Grips: Golf Pride MCC
Check out more in-hand photos of Alex Fitzpatrick’s clubs here.
- LIKE16
- LEGIT0
- WOW1
- LOL1
- IDHT1
- FLOP0
- OB0
- SHANK0
-
19th Hole3 weeks agoDave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole7 days agoJustin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole3 weeks agoTiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole7 days ago‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks agoTwo star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole2 weeks agoReport: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole2 weeks agoNeal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole2 weeks agoBrandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
alanp
Nov 17, 2017 at 7:24 am
yes i too was hoping that this was going to be gear for the diy’er. this video is preaching to the choir, ie if you have those tools, you know how to pull a shaft. want to make the “series” interesting? teach us guys at home how to do this with common tools. anyway thanks for posting the vid
Shawn K
Nov 16, 2017 at 11:47 pm
Very easily done with a $400 shaft extractor. Lets see him do it with my $39 shaft extractor….not pretty but effective.
Ross
Nov 16, 2017 at 10:21 am
Just remember to get the consent form signed before you try and pull the shaft or you’l lbe forced to apologize in 20 years!
Darryl
Nov 16, 2017 at 8:02 am
OEM shafts don’t come off with so little heat in my experience.
I use the “instant” epoxy (5 min set time) and you get nice smooth and easy pulls like that. What’s your opinion on the “weaker” epoxy option over the 24hr stuff Ryan? I just find it easier for building as you don’t have to be super careful with shaft orientation as it sets quick and avoids the overnight creep I sometimes see with 24hr epoxy.
Skip
Nov 16, 2017 at 3:33 pm
It does with a tip/adapter since they’re usually made of aluminum. the heat is conducted very quickly and the epoxy breaks down very quickly.
CB
Nov 15, 2017 at 6:26 pm
I pull it with my teeth.
You knew that comment was coming
J1987F
Nov 15, 2017 at 4:45 am
Some of the ferrules on my irons have moved away from the hosel. Would you recommend this method, using a micro butane torch, to gently heat up the ferrules and move them back into the correct position?
Ryan B
Nov 15, 2017 at 10:34 am
for getting ferrules to move a torch will be too much. best bet is to just use a hair dryer
chinchbugs
Nov 14, 2017 at 4:00 pm
Any suggestions if you don’t have a shaft puller?
Ryan B
Nov 14, 2017 at 10:36 pm
You can pull steel shafts without a puller but if the goal is to re-use the graphite shafts then you really need a decent shaft puller. There are value models that do a pretty good job its just clamping and setup takes a bit longer.