Connect with us

Equipment

Member Reviews: Callaway Steelhead XR Fairway Woods

Published

on

One of the many benefits of being a GolfWRX Forum Member is exclusive access to Giveaways and Testing Threads. In this Testing Thread, we selected six members to test a Callaway Steelhead XR fairway wood built to their specs.

CallawaySteelheadXRwoods-1021x580

The Steelhead XR has a club face made of steel for that familiar Steelhead feel. The crowns are made from J-36 carbon fiber to lower center of gravity and move it more forward; that will help it produce lower spin like the original designs that sold 2.3 million units. According to Callaway, the crowns weigh just 6 grams — that’s 20 grams lighter than Callaway’s XR ’16 fairway wood crowns.

Full Tech Story: Callaway upgrades a classic, introduces Steelhead XR fairway woods

The Steelhead XR fairways also have a Hyper Speed Face Cup that produces more ball speed across the face, and Speed Step technology, or the raised portions on the crown, that were first introduced in Callaway XR ’16 metalwoods. They improve aerodynamics to help golfers produce higher swing speeds.

Each member completed a detailed analysis and rating of the club. You can see the full reviews here. Below, we pull quotes from the reviews to give you a feel for what this choice group of WRXers had to say. The responses have been minimally edited for brevity and style. Thanks to all of those involved in the testing!

lutomrSC

  • Club Tested: Callaway Steelhead XR (13.5 degrees)
  • Shaft Tested: Mitsubishi Tensei CK Blue 65X

“I like almost everything about how this club looks. The color combination of the dark blue against the steel face gives a nice contract. I really like how the carbon fiber looks under the blue paint.”

“At times the ball appeared to have a little too much spin and would tend to climb to a height that would be above my current gamer off the tee. It would tend to go further because of the stronger loft, however, usually about 5-7 yards. Perhaps a different shaft could help the spin, but it would need testing. The Mitsubishi Tensei CK Blue 65 Graphite X-flex is a great stock option. It has a good feel and a weight that I prefer, and I think it can keep up with higher swing speeds without issue.”

SDickenson642

  • Club Tested: Callaway Steelhead XR 4+ (16 degrees)
  • Shaft Tested: Mitsubishi Tensei CK Blue 65X

“The appearance of the Steelhead is amazing. The shape is perfect for my eye, as I prefer a smaller profile down by the ball in fairway woods. The face is pretty deep compared to my [Cobra] Fly-Z+ I’ve been playing for three years now. The sound is amazing off the head. I never had the privilege of playing the original Steelhead fairways, but it does remind me of the original woods I played as a kid, which I think where Tommy Armour 845’s.”

“With the deeper face of the Steelhead XR, I thought I would have issues launching the ball from the deck on par 5s, but I did not see any issue. Turf interaction with the Steelhead was great. I was able to try multiple lies from the fairway, rough, and even a bunker. From the fairway I could easily control it and actually get the ball up in the air enough and with enough spin to hold greens.”

MillerLowLife

  • Club Tested: Callaway Steelhead XR 4+ (16 degrees)

“The top of this club looks awesome at address. I really liked the look of the crown that is a dark blue and shows the carbon fiber underneath. That, coupled with the silver steel face, makes it easy to frame the ball. This is a steel club so the sound and feel will be a sharper metal sound that’s accustomed to the old Steelheads. Has great swing weight and feel. Felt really easy to hit this in the tee box, fairway, or rough.”

“I really enjoyed the versatility of the 4+ with the shorter playing length, heavier swing weight, and flatter lie angle. For me, it felt like a bomber off the tee box, but it was still something I could use to get me out of less-than-ideal lies outside of the fairway —  something I wouldn’t think about with my current gamer.”

Hackster

  • Club Tested: Callaway Steelhead XR 4+ (16 degrees)

“This club is all business. Longer than my 3-wood, flies higher and able to work the ball left and right. On the tee, the ball jumps forward when it hits fairway. Does not lose much distance on off-center hits.”

“Long off the fairway, just put on cruise control and fire away. I struggle in the rough with any fairway wood, so not much to compare to — that’s what hybrids are for. Love this club. Had concerns where it would fit in the bag, but easily able to replace my 14.5-degree 3-wood with the 4+. Much more versatile than my current 3-wood and longer.”

drifliboy

  • Club Tested: Callaway Steelhead XR 3+ (13.5 degrees)

“This club with the lower loft of the 3+ worked well for me off the tee. It was close to my driver on distance. It seemed to launch quickly and then maintain its height. It did not balloon for me. It also really seemed to want to go straight, a couple of times shots almost seemed to correct a little in the air, particularly if I had pushed it. This club at this loft is pretty much a driver replacement for me.”

“If you are looking for a very classy fairway wood that is solid, long, with some forgiveness and doesn’t look like it was developed by a “mad” scientist, this club should be on your short list. It works well off the tee and turf. Please test and get fitted for the right loft and flex. I think this club provides most golfers with very good options that should be considered if they are looking to upgrade any of their woods.”

Discussion: Read the full responses here.

Your Reaction?
  • 93
  • LEGIT15
  • WOW5
  • LOL2
  • IDHT2
  • FLOP5
  • OB3
  • SHANK35

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

22 Comments

22 Comments

  1. TG

    Sep 16, 2017 at 5:38 pm

    The X2 Hot pro 3 wood is still one of my favorites from cally. I’m too young to have played with the original steelheads but the X2 Hot still has a place in my bag!

    • Nick

      Sep 18, 2017 at 2:13 am

      Thanks for telling us the X2 Hot Pro is your “favorite from Cally”… and that you’re “young” and it’s “in my bag”. You must be a happy happy boy… now seek human contact.

  2. JJVas

    Sep 15, 2017 at 8:53 pm

    Bought the XR 4+ because I loved the old Steelheads, and I tried it with 3 different shafts, starting with the Tensei 65-X that was too light. This is THE BEST looking FW to my eyes because I have no trouble getting the ball up and hate shallow heads. I cannot remember wanting a club to work quite so badly, but it just didn’t for some reason, and I gave it every shot. I’m back to my Srixon F45 that I can set a bit open, but man… I’m still sad about this one. They look perfect.

    • Nick

      Sep 18, 2017 at 2:10 am

      So you just bought it because they “look perfect” and you “loved the old Steelheads”, and you are “getting the ball up”, and you “want it so badly”. Do you sleep with the club too?

  3. Keith

    Sep 15, 2017 at 2:20 pm

    I’ve had a 2014 SLDR 3-wood in the bag since, well, 2014. Wanted to give these steelhead’s a look so went to my local shop and got mine and the steelhead on the monitor. They only had a 3+ (13.5d) so I set my SLDR on the low setting of 13.5d as well. Steelhead had the stock X in it, my SLDR has the Speeder 77 X in it.

    Average on 5 balls was 268 with my SLDR, 255 for the Steelhead. Slightly higher launch with the steelhead and a bit more spin. After seeing the numbers, guy told me that even if I wanted it, he wouldn’t sell it to me.

    • BO

      Sep 15, 2017 at 8:36 pm

      Talk to Swingman/Jerry below who claims they’re the greatest he’s ever hit and they make him feel good all over.

  4. LLC

    Sep 14, 2017 at 1:21 am

    Isn’t “Steelhead” somewhat misleading given the carbon fiber construction?
    Perhaps a more accurate name would be “Compositehead”XR.

  5. OBSERVVANT

    Sep 13, 2017 at 8:03 pm

    I’M FLICKING TIRED OF LOOKING AT “NEW & IMPROVED & $$$$$” FLICKING GOLF CLUBS!!!!
    ShTFU ALREADY !!!!!!

    • Casa Nova

      Sep 13, 2017 at 8:18 pm

      Hey, it’s called progressive planned obsolescence as golf technology rapidly creates longer and better golf clubs for the grateful golfing public. What are you, some kind of luddite who can’t keep up with newer and better golf club developments?

      • BO

        Sep 14, 2017 at 5:25 pm

        It’s called scamming adult men with childish mentalities buying new toys.

  6. Swingman/Jerry

    Sep 13, 2017 at 6:10 pm

    I’ve played them since mid- July. Great fairways off the tee and deck. The rounded, cambered sole does help you out of difficult lies. Be aggressive and you will get distance and a mid to high flight. You ought to have at least the 5 wood in the bag – very long, and more consistent than the 3 wd, with almost as much distance. Give it a go.

    • BO

      Sep 14, 2017 at 5:27 pm

      No thanks, Cally/Jerry, now go back to work and stop promoting yer clubs.

      • Swingman/Jerry

        Sep 15, 2017 at 11:16 am

        Just a regular guy on golfwrx. Steelheads are versatile and long. Prefer them over Epic.

        • BO

          Sep 15, 2017 at 8:32 pm

          Yer an obvious shill for Callaway. Nobody believes your propaganda feelings.

          • Swingman/Jerry

            Sep 17, 2017 at 1:31 pm

            LOL! I only wish Callaway was paying me in Product or $$$

    • Jerry

      Nov 4, 2017 at 4:19 pm

      I like the feel of the Tensei – smooth and lively. At the same time, the 55 feels a bit whippy for the flex. If you are having issues and like the head, try another shaft, which is what I’m doing.

  7. OX

    Sep 13, 2017 at 4:31 pm

    Just kidding, I’ll take 3!

  8. OX

    Sep 13, 2017 at 2:51 pm

    Nice to read the comments from golf store and Cally employees. Sorry, boys, but I will not be buying those beautiful Steelheads because my 5 y.o. clubs are still working fine for me.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Steve Stricker WITB 2024 (April)

Published

on

Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X

3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX

Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X

Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5

Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore

Putter: Odyssey White Hot No. 2

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet Grip Rite

Check out more in-hand photos of Steve Stricker’s clubs here.

Your Reaction?
  • 13
  • LEGIT2
  • WOW0
  • LOL0
  • IDHT1
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Alex Fitzpatrick WITB 2024 (April)

Published

on

  • Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic. 

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X

Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX

Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)

Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X

Putter: Bettinardi SS16 Dass

Grips: Golf Pride MCC

Check out more in-hand photos of Alex Fitzpatrick’s clubs here.

Your Reaction?
  • 5
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT1
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss

Published

on

In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
  • driveandputtmachine: “Still playing a MIni 300.  The head was only 208, so I ordered a heavier weight and play it at 3 wood length.  I am playing a Ventus Red 70.   I play 70 grams in my fairways.  I use it mainly to hit draws off the tee.  When I combine me, a driver, and trying to hit a draw it does not work out well most of the time.  So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck.  The 300 Mini is very good off the deck.”
  • JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”

Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”

Your Reaction?
  • 4
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT1
  • FLOP0
  • OB0
  • SHANK4

Continue Reading

WITB

Facebook

Trending