Connect with us

Published

on

In this week’s show, I talk about why one of the most common ball flights in golf might be appearing in your golf game and how wrist angles set the pattern for common movements in slicers.

Your Reaction?
  • 73
  • LEGIT7
  • WOW7
  • LOL2
  • IDHT0
  • FLOP1
  • OB0
  • SHANK5

Mark Crossfield has been coaching golf for more than 20 years, and has enjoyed shaping the digital golf world with fresh, original and educated videos. Basically, I am that guy from YouTube. You can connect with Mark on Periscope (4golfonline) and Snapchat (AskGolfGuru), as well through the social media accounts linked below.

10 Comments

10 Comments

  1. Patrick Holway

    Nov 4, 2016 at 2:31 pm

    Wow. This is 100% what I do – aim left and have at it. Heading to the practice tee this weekend to try this out. Great stuff as always.

  2. Mattias

    Nov 1, 2016 at 3:55 am

    Another great insight into golfs great mystery. I also love the swing of Mark, it feels so very well balanced. No wonder he manage to keep it on the short stuff while coach and long haired travel guy adds to their lost ball counts..

  3. nobody

    Oct 30, 2016 at 4:27 am

    The data-based analysis is superb.

    But it’s not just the data, but you’re interpretation of the data that’s so helpful.

    I’m guessing that’s really the key for golf instructors, that they’re able to interpret the data in ways that reveal what it takes to make the golf club arrive at the ball in the most efficient and productive manner.

    The part I found most helpful was your explanation that “cupping” the wrist allows one to make the angle between the club shaft and lead arm more acute… thus increasing lag in theory.

  4. Chris

    Oct 29, 2016 at 10:25 am

    Dear Mark,
    This was quite enlightening for me in helping to understand the difference between cause and efffect. Thanks.

    Best, Chris

  5. Mr. Wedge

    Oct 26, 2016 at 3:07 pm

    Well done, good video. When talking about slicing there is always talk about swing path, plane, coming OTT, face angle, etc….but rarely do you see someone talking about what causes those things, that ultimately cause the slice. This isn’t the only thing that causes a slice, but it sure is a very common one.

    • Snowman

      Oct 28, 2016 at 12:33 pm

      Totally agree with Mr. Wedge. So many instructors will explain what is happening with the path, /clubface but have no clue to explain the causing factors. My common Miss is a Pull and I often ‘hit target’ with a pull/”fade”; This video is very helpful.

  6. Charles Bartholomew

    Oct 26, 2016 at 12:49 pm

    Thanks for the info Mark. Your explanation brings clarity to what is needed to bring the ball back to an acceptable/playable path.

  7. Brian DeGraf

    Oct 26, 2016 at 9:42 am

    Couldn’t agree more with Mark. And, it seems to work with all clubs, not just driver. If I concentrate on keeping left wrist flat the ball won’t slice. Good stuff, as Johnny Miller says.

  8. Golfbuddy

    Oct 26, 2016 at 9:28 am

    Very practical. Found I was eliminating my slices by flattening the wrist.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Instruction

Clement: This wrist position can add 30 yards to your drive

Published

on

Drop the mic on how the wrists should load and be positioned for compressive power, accuracy, and longevity! There is a better way, and this is it!

Your Reaction?
  • 8
  • LEGIT0
  • WOW0
  • LOL3
  • IDHT1
  • FLOP1
  • OB1
  • SHANK2

Continue Reading

Instruction

Short Game University: How to hit wedges 301

Published

on

In golf, there is nothing harder than judging a flop shot over a bunker to a tight pin out of long grass. Why? Because there are so many variables to account for — in addition to what you can and cannot do with a wedge. In fact, up until very recently in the world of wedge design, we were limited to only increasing the landing angle to stop the ball, because relying on spin from this lie and this close to the green was next to impossible.

Now with the advent of things like raw faces, different CG locations, new groove design, and micro-ribs between the grooves, we can now spin the ball out of lies that we never could have done so before. This is not to say that you can now zip the ball back from these types of lies, but we are seeing spin rates that have skyrocketed, and this allows us to not open the face as much as we needed to do before in order to stop the ball.

Before we get into the shot around the green itself, let’s talk a bit about wedge design. For that, I called a great friend of mine, Greg Cesario, TaylorMade’s Staff Manager to help us understand a bit more about wedges. Greg was a former PGA Tour Player and had a big hand in designing the new Milled Grind 3 Wedges.

Cesario said: “Wedge technology centers on two key areas- the first is optimizing its overall launch/spin (just like drivers) on all shots and the second is optimum ground interaction through the geometry of the sole (bounce, sole width, and sole shape).”

“Two key things impact spin: Groove design and face texture. Spin is the secondary effect of friction. This friction essentially helps the ball stick to the face a little longer and reduces slippage. We define slippage as how much the ball slides up the face at impact. That happens more when it’s wet outside during those early morning tee times, out of thicker lies, or after a bit of weather hits. Our Raised Micro-Ribs increase friction and reduce slippage on short partial shots around the round – that’s particularly true in wet conditions.”

“We’ve been experimenting with ways to find optimal CG (center of gravity) placement and how new geometries can influence that. We know that CG locations can influence launch, trajectory and spin. Everyone is chasing the ability to produce lower launching and higher spinning wedge shots to help players increase precision distance control. In that space, moving CG just a few millimeters can have big results. Beyond that, we’re continuing to advance our spin and friction capabilities – aiming to reduce the decay of spin from dry to fluffy, or wet conditions.”

Basically, what Greg is saying is that without improvements in design, we would never be able to spin the ball like we would normally when it’s dry and the lie is perfect. So, with this new design in a wedge like the Milled Grind 3 (and others!), how can we make sure we have the optimal opportunity to hit these faster-stopping pitch shots?

  1. Make sure the face is clean and dry
  2. Open the blade slightly, but not too much
  3. Set the wrists quicker on the backswing to increase the AoA
  4. Keep the rear shoulder moving through impact to keep the arms going

Make sure the face is clean and dry

If your thought is to use spin to stop the ball quicker under any situation, then you must give the club a chance to do its job. When the grooves are full of dirt and grass and the remaining exposed face is wet, then you are basically eliminating any opportunity to create spin. In fact, if you decide to hit the shot under these conditions, you might as well hit a flop shot as this would be the only opportunity to create a successful outcome. Don’t put yourself behind the eight-ball automatically, keep your club in a clean and dry condition so you have the best chance to do what you are capable of doing.

Open the blade slightly, but not too much

Without going into too much extra detail, spinloft is the difference between your angle of attack and your dynamic loft. And this difference is one of the main areas where you can maximize your spin output.

Too little or too much spinloft and you will not be able to get the maximum spin out of the shot at hand. With wedges, people equate an open clubface to spinning the ball, and this can be a problem due to excessive spinloft. Whenever you have too much dynamic loft, the ball will slide up the face (reduced friction equals reduced spin) and the ball will float out higher than expected and roll out upon landing.

My thought around the green is to open the face slightly, but not all the way, in efforts to reduce the probability of having too much spinloft during impact. Don’t forget under this scenario we are relying on additional spin to stop the ball. If you are using increased landing angle to stop the ball, then you would obviously not worry about increasing spinloft! Make sure you have these clear in your mind before you decide how much to open the blade.

Opened slightly

Opened too much

One final note: Please make sure you understand what bounce option you need for the type of conditions you normally play. Your professional can help you but I would say that more bounce is better than less bounce for the average player. You can find the bounce listed on the wedge itself. It will range between 4-14, with the mid-range bounce being around 10 degrees.

Set the wrists quicker on the backswing to increase the angle of attack

As we know, when debris gets in between the clubface and the ball (such as dirt/grass), you will have two problems. One, you will not be able to control the ball as much. Secondly, you will not be able to spin the ball as much due to the loss of friction.

So, what is the key to counteract this problem? Increasing the angle of attack by setting the wrists quicker on the backswing. Making your downswing look more like a V rather than a U allows less junk to get between the club and the ball. We are not using the bounce on this type of shot, we are using the leading edge to slice through the rough en route to the ball. Coming in too shallow is a huge problem with this shot, because you will tend to hit it high on the face reducing control.

Use your increased AoA on all of your crappy lies, and you will have a much better chance to get up and down more often!

Keep the rear shoulder moving through impact to keep the arms going

The final piece of the puzzle through the ball is speed through the pivot. You cannot hit shots around the green out of tall grass without keeping the club moving and having speed. A reduction of speed is obvious as the club enters into the tall grass, but you don’t want to exacerbate this problem by cutting off your pivot and letting the arms do all the work.

Sure, there are times when you want to cut off the body rotation through the ball, but not on the shot I am discussing here. When we are using spin, you must have speed to generate the spin itself. So, what is the key to maintaining your speed? Keeping the rear shoulder rotating long into the forward swing. If you do this, you will find that your arms, hands, and club will be pulled through the impact zone. If your pivot stalls, then your speed will decrease and your shots will suffer.

Hopefully, by now you understand how to create better shots around the green using the new wedge technology to create more spin with lies that we had no chance to do so before. Remembering these simple tips — coupled with your clean and dry wedge — will give you the best opportunity to be Tiger-like around the greens!

Your Reaction?
  • 62
  • LEGIT18
  • WOW3
  • LOL0
  • IDHT0
  • FLOP2
  • OB3
  • SHANK6

Continue Reading

Instruction

An awesome drill for lag that works with the ball!

Published

on

Many lag drills have come and gone in this game because they have a hard time working when the ball is there! How many times do you hear about someone having a great practice swing and then having it all go away when the ball is there? This one is a keeper!

Your Reaction?
  • 9
  • LEGIT2
  • WOW1
  • LOL0
  • IDHT0
  • FLOP1
  • OB0
  • SHANK5

Continue Reading

Trending