Equipment
Nike’s Vapor Fly will hit stores on Jan. 29
Nike has announced that its new Vapor Fly line of clubs — two drivers, a fairway wood, a hybrid and two sets of irons — will be available starting Jan. 29.
A third Vapor Fly driver, Nike’s Vapor Flex 440, will be available starting March 4.
Rumors about Nike’s 2016 golf club line have been circulating for months, along with photos of the new gear. Finally, we have the official details on the clubs. Learn more each of Nike’s new releases below, and visit Nike’s website for all the details.
Drivers
- Official Name: Nike Vapor Fly
- Head size: 460 cubic centimeters
- What you need to know: Nike’s most-forgiving driver. Spins more than the Vapor Pro. Played by Paul Casey.
- Official Name: Nike Vapor Fly Pro
- Head size: 460 cubic centimeters (pear shape)
- What you need to know: Nike’s mid-forgiving, mid-spinning driver. Used by Rory McIlroy.
- Official Name: Nike Vapor Flex 440
- Head size: 440 cubic centimeters
- What you need to know: Nike’s adjustable CG driver (forward and back positions) is designed to be its lowest-spinning model. More than 60 percent of the club head is made from carbon fiber-reinforced RZN, according to Nike. That should help make it more playable than last year’s model, which was light on forgiveness.
See what GolfWRX members are saying about Nike’s new launch here.
Fairway Wood
- Official Name: Nike Vapor Fly Fairway Wood
- Adjustability: Five models. New adjustable hosel allows for independent standard or upright lie angle settings. Adjustable lofts range from 12-22 degrees.
- What you need to know: A lower CG from a lighter crown should create a higher launch angle and and less spin than previous Nike fairway woods. A “HyperFlight Face” is designed to be thinner around its perimeter for more ball speed across the face.
Hybrid
- Official Name: Nike Vapor Fly Hybrid
- Not adjustable
- What you need to know: This one is designed to be a “true iron replacement” with a “tour shape,” according to Nike.
Irons
- Official Name: Nike Vapor Fly Pro
- Set makeup: RZN cavity long irons (2-5), RZN pocket mid irons (6-8) and RZN cavity short irons (9,PW,AW)
- What you need to know: Nike says these irons launch higher and farther than traditional game-improvement irons, which may indicate that these clubs are larger and more forgiving than the Vapor Pro Combo irons that they seem to replace.
- Official Name: Nike Vapor Fly irons
- Set makeup: RZN cavity long irons (4-7), RZN Pocket mid irons (8-PW) and RZN cavity short irons (AW, SW)
- What you need to know: These will be higher launching, more forgiving and longer-flying than the Vapor Fly Pro irons. They’re a more “oversized” iron.
See what GolfWRX members are saying about Nike’s new launch here.
- LIKE74
- LEGIT14
- WOW5
- LOL9
- IDHT2
- FLOP6
- OB3
- SHANK46
Whats in the Bag
Steve Stricker WITB 2024 (April)
- Steve Stricker WITB accurate as of the Zurich Classic. More photos from the event here.
Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X
3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX
Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X
Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5
Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore
Putter: Odyssey White Hot No. 2
Ball: Titleist Pro V1x
Grips: Golf Pride Tour Velvet Grip Rite
Check out more in-hand photos of Steve Stricker’s clubs here.
- LIKE24
- LEGIT2
- WOW0
- LOL0
- IDHT1
- FLOP0
- OB0
- SHANK1
Whats in the Bag
Alex Fitzpatrick WITB 2024 (April)
- Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X
Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX
Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)
Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X
Putter: Bettinardi SS16 Dass
Grips: Golf Pride MCC
Check out more in-hand photos of Alex Fitzpatrick’s clubs here.
- LIKE11
- LEGIT0
- WOW0
- LOL1
- IDHT1
- FLOP0
- OB0
- SHANK0
Equipment
What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss
In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
- driveandputtmachine: “Still playing a MIni 300. The head was only 208, so I ordered a heavier weight and play it at 3 wood length. I am playing a Ventus Red 70. I play 70 grams in my fairways. I use it mainly to hit draws off the tee. When I combine me, a driver, and trying to hit a draw it does not work out well most of the time. So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck. The 300 Mini is very good off the deck.”
- JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”
Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”
- LIKE5
- LEGIT1
- WOW0
- LOL0
- IDHT2
- FLOP0
- OB0
- SHANK5
-
19th Hole3 weeks ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole6 days ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole3 weeks ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole6 days ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole2 weeks ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole2 weeks ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole2 weeks ago
Brandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
nikeguy75
Jan 26, 2016 at 9:49 pm
I like the colors. Why be like everyone else. I played Nike since they first came on the scene. they have gotten better every year. I am looking forward to the new Nike vapor pro fly series.
duffer888
Dec 16, 2015 at 11:51 am
yay, more mid-year heavily discounted gear!
Steve
Dec 14, 2015 at 8:52 am
Would anyone out of high school play these. The colors limit the market
Tom D.
Dec 11, 2015 at 3:13 pm
Just one question: Did they have to wait 1 cycle, until Cobra had moved past their FLY designation, before Nike could use it?
Mark
Dec 11, 2015 at 3:00 pm
Nike make quality woods, irons and wedges but need to sack their “stylists” and hire people who realise most good players want simple, efficient looking clubs and not something that appeals to a 12 year old who think Kanye is cool.
AJ
Jan 3, 2016 at 6:50 pm
Who’s Kanye?
David
Dec 11, 2015 at 7:07 am
Hmmmm those drivers look pretty interesting not sure on the irons until I see the rest of them
I’m sure all the pros on here will upset with whatever lofts are on the club.
mo
Dec 10, 2015 at 10:03 pm
I don’t do pastel colored golf clubs.
AJ
Dec 10, 2015 at 9:36 pm
Going from woods to metals now to rzn carbons? For people who want to be literal, i dont know what else to call the flex that is less than 40% metal. LOL
Christestrogen
Dec 10, 2015 at 5:13 pm
I hit a flex because it has the deadest sound I’ve hit on a driver since the prov1 era began…
The flex is not, IMHO, forgiving on anything outside the center of the face…but I’m willing to sacrifice toe bunts for the sound…
The CGI tech is VERY cool and makes an absolute difference in ball height….
If the sound is the same as 2014s flex then I will happily buy the new one….especially if it is more forgiving and less spinny on off-center hits.
-Christosterone
some guy
Dec 30, 2015 at 6:41 pm
The 2016 has an even flatter sound than the 2015 model, it sounds like an old 975J. The flight is awesome, very low spinning and much more forgiving than last years.
James
Dec 10, 2015 at 3:12 pm
I would be interested in trying the Flex. The original flex was great once you managed to get it set up correctly. I have a ‘2dot’ Covert 2.0 Tour and its gonna be tough to find something that could knock it out of my bag.
Royal Tenenbaum
Dec 10, 2015 at 2:40 pm
Can’t wait to get fitted for the Fly Pro. I live in Fort Worth and have been out to the Oven a few times for testing. Never got to do anything with “new” stuff; mostly just logging swings and putts for their R&D team. But it was still awesome to get in there and see the bays and equipment.
Have to find a way to get fit for a full bag out there…would be incredible!