Connect with us

Equipment

The Big Review – Nike Method Putter

Published

on

Since they burst onto the golfing scene, it’s fair to say that Nike golf have surprised everyone with the scale of their success. Capturing the world’s number one golfer was the sort of marketing move you would expect from a global sports behemoth like Nike but how quickly they started making genuinely brilliant golf equipment was not.

For the last few years, Nike has made superb options for all areas of the game – all areas bar the putter. In fact, given the quality they have in every other part of the bag, the glaring blank spot where you would expect to find premium putter is distinctly odd. Previous attempts at making one produced the likes of the Unitized which you would describe as average if you were being kind. However, the creation of a putter that in prototype form took 2 majors and 3 other tour wins has made everyone sit up an take notice. Step forward the METHOD putters.

Named after the ‘scientific method’ used by the engineers and designers at Nike’s Research and Development center The OVEN, the METHOD series putters have a face with a unique combination of grooves and multi-material construction. Like Yes!, TaylorMade and Rife before them, the polymetal groove system is designed to get the ball rolling faster to minimize bounce and keep the ball on line to produce the sort of performance that top tour players demand. How well they have succeeded at this seems to have been demonstrated by Lucas Glover and Stewart Cink when they won the 2009 U.S. Open and The OPEN Championship respectively.

The METHOD comes in 5 models, the 001 plumbers neck blade, the 002 heel shafted blade, the 003 heel shafted mid mallet, the 004 face balanced blade and the 005 face balanced mid mallet.

We are told this about the design of each of these putters: ‘The Nike METHOD has a flowed-through low-durometer polymetal groove technology that dampens impact vibrations for soft touch, while the interspersed milled steel face maintains audible feedback for proper distance control. A multi-material face starts the ball on a positive spin that is faster than both a milled steel putter as well as putters with a polymer face insert.’

Appearance

Nike have left behind the weird designs and dodgy paint jobs to and have returned back to a clean and classic approach and they have done a great job with this new look. The steel part of the face has fantastically precise milling marks and the 7 polymetal lines are actually flush with the face despite looking like they are slightly proud. A closer look at the face also shows that the face has 3 surfaces in contact with the ball – the milled 303 steel, the polymetal grooves and the actual grooves milled into the face. The sole of the club looks ‘beached’ but in fact is just where polymetal enters the head.

The one fly in the looks ointment is the ‘waffles’ on the back of the bumpers. Only the most die-hard of Nike fans could think that they are attractive and considering that there weren’t present on the prototypes you wonder why they were added. Thankfully they are invisible at address as they don’t fit in with the rest of the club.

Specifically looking at the 001, it’s no secret that this is the version that was designed with Tiger Woods in mind. With styling highly reminiscent of Woods’ Newport 2, sight dot and all, it’s a beautiful piece of craftsmanship and Nike’s biggest desire must be to get this into his bag. Of course, whether Woods will ever be parted from his putter is another matter.

The head cover is a classy black leather affair and is very well made. The magnetic strip closures makes them both very easy and very quiet to use.

Feel

Coming from previous Nike putters, the level of feel offered by METHOD putters is nothing short of a revelation. Finally Nike have taken the step up into the level of feedback required for a putter to be considered top tier. The feel is softer than a pure metal putter but has none of the deadness you often get with full face inserts. Across both the putters tested the feel from the combination of the milled steel, the polymetal insert and the grooves managed to be both lively and solid. While this was most obvious with premium balls, even distance balls gave the level of feedback required to be able to judge distances perfectly.

One of the most obvious strengths of the METHOD putters is that the sweetspot is right across the width of the grooves. You have to actively try to miss the grooves if you want to get anything less than a great sensation.

The grip is a GolfPride Tour Tradition and the standard smaller sized grip ensures that you don’t lose anything from head to hands as the club sits more in the fingers.

Performance

Whether you have a gated stroke or a straight-back straight-through or some combination of the two, the variety of models offered ensure that there is something that will match your stroke and make it easy to get the ball rolling to the hole. Another of the benefits of the polymetal groove system is that it allows 30 grams of internal weight to be excavated from the face and body and relocated to the perimeter. The resulting increase in MOI means straighter putts on off center hits.

The effects of the grooves is obvious too. As with other groove faced putters, the ball comes off the face and gets rolling fast. The way the ball hugs the green means that it is less likely to stray. So you can spend more time thinking about getting the ball in the hole rather than worrying about it skittering offline.

Grooved faced putters can sometimes make judging long distance putts tricky. With the ball rolling faster and skipping less at the start of the putt the tendency is to gas the ball past the hole. The sheer torrent of feedback means that you quickly pick up the required touch to regularly leave the ball close to the hole.

Conclusion

Finally, Nike have produced something that belongs in the premium putter market. They took a not unusual decision to release a limited edition (LE) version months ahead of the standard version. As hoped for, the interest generated was huge. However, the time between the LE and this version coming out has meant that the buzz generated has died down a little which has left some people wondering whether the METHODS are as good as they say. This is one occasion when you should believe the hype as they are definitely good enough to be challenging for bragging right with any offerings from the likes of Scotty Cameron, Ping or Odyssey. Having been in the bag for 2 majors, this is a club that performs as well as anything out there and the only question is; which METHOD do you want?

Your Reaction?
  • 46
  • LEGIT4
  • WOW2
  • LOL3
  • IDHT1
  • FLOP1
  • OB3
  • SHANK5

7 Comments

7 Comments

  1. Pingback: What's in Rory McIlroy's Bag? | Golf Gear Select

  2. Walter Pendleton

    Feb 6, 2013 at 8:41 pm

    Is Nike, Odyssey, Cameron or anyone manufacture putters that have the advantages of adjustable lie angles? Doesn’t anyone have the nerve to say, “Hey, that putter is to short, the lie angle is 5 degrees off, the grip it two sizes to small and their is too much loft on that putter.

    Am I the only guy in the world that notices how poorly putter fit the average player’s stroke. Com’On Man!

  3. RH

    Aug 12, 2012 at 4:57 pm

    The putter is not working to well for Tiger at the PGA!

  4. Pingback: GolfWRX.com – The Big Review – Nike Method Putter | Golf Products Reviews

  5. Pingback: money|make|freebie

  6. Kevin

    Jan 12, 2010 at 8:24 pm

    Rep was in our store today.  Tried the #1 and the #4.  I was blown away at the sound and feel of these putters.  I wasn't a fan of goose neck #4 until I rolled some putts with it.  Wow, it's a very, very solid putter.  In terms of feel, i don't think there are many putters that have a softer feeling face.  To me, it's a better feeling putter than a Redwood or Scotty.

  7. alex

    Jan 10, 2010 at 10:24 pm

    When do the company release the new method putter to golf shops and when do the company release, the new nike Victory Red line of drivers and woods.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Steve Stricker WITB 2024 (April)

Published

on

Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X

3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX

Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X

Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5

Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore

Putter: Odyssey White Hot No. 2

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet Grip Rite

Check out more in-hand photos of Steve Stricker’s clubs here.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT1
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Alex Fitzpatrick WITB 2024 (April)

Published

on

  • Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic. 

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X

Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX

Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)

Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X

Putter: Bettinardi SS16 Dass

Grips: Golf Pride MCC

Check out more in-hand photos of Alex Fitzpatrick’s clubs here.

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss

Published

on

In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
  • driveandputtmachine: “Still playing a MIni 300.  The head was only 208, so I ordered a heavier weight and play it at 3 wood length.  I am playing a Ventus Red 70.   I play 70 grams in my fairways.  I use it mainly to hit draws off the tee.  When I combine me, a driver, and trying to hit a draw it does not work out well most of the time.  So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck.  The 300 Mini is very good off the deck.”
  • JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”

Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”

Your Reaction?
  • 3
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK2

Continue Reading

WITB

Facebook

Trending