Connect with us

Equipment

TaylorMade goes big with the AeroBurner irons

Published

on

Wide soles, thick top lines and long blade lengths. That’s not the recipe for a set of classic-looking irons, but when it comes to performance, it’s hard to beat.

TaylorMade’s new AeroBurner irons are designed to be the longest, most forgiving irons in the company’s 2015 lineup, thanks to their low center of gravity and extreme heel-toe weighting. Like TaylorMade’s other irons, the AeroBurners also have the company’s Speed Pocket, a slot in the sole that raises launch angle and improves ball speed — particularly on off-center hits.

f785978e5a64ccb4f532b2eff57d2399 7da282fb327ed8e2477d1f1050870d26 3bf5e786c387f7879a236ef0a95cbfc7

[quote_box_center]”Over the years, TaylorMade irons have gotten smaller,” said Tomo Bystedt, TaylorMade’s director of product creation for irons. “We felt we were not meeting the needs of certain golfers, and wanted to make an iron that was as long and as easy to play as anything we’ve ever made.”[/quote_box_center]

Related: Click here to learn about TaylorMade’s AeroBurner Mini Driver. 

According to Bystedt, the AeroBurner irons are for golfers who don’t hit their irons as far as they’d like. That’s why they have the stronger lofts that they do — the 6 iron measures 25.5 degrees, the pitching wedge measures 43 degrees.

08a425f9c85efb0c51f19826723de2f2

[quote_box_center]”We don’t typically use handicap as a guide… but these are probably for golfers with handicaps of 15 or more,” he said. [/quote_box_center]

Noticeably absent from the design of the AeroBurner irons are TaylorMade’s “Face Slots,” which are two vertical slots positioned on the toe and heel areas of the club face. They are used in the company’s RSi 1, RSi 2 and RSi TP irons.

ced3210c2b61891d844e2ee148d8f274

Face slots make a club face play “larger,” or more forgiving than it would otherwise without increasing the size of the head. Because of the already large head size of the AeroBurner irons, Face Slots were not needed for the AeroBurner’s design, Bystedt said.

Golfers interested in the AeroBurner irons should expect a ball flight with a slight left bias from the clubs.

[quote_box_center]”The RSi 1 irons are designed to fly dead straight,” Bystedt said. “But we gave the AeroBurner irons a CG that will create about 2.5 yards more left bias.”[/quote_box_center]

The AeroBurner irons (available in 4-PW, AW, SW) will be in stores March 27.

Stock Shafts: Available with FST REAX 88 High Launch steel shafts ($699 for an eight piece set) or AeroBurner REAX 60 graphite shafts ($799) in stiff, regular, senior or ladies flex.

Click here to see what GolfWRX Members are saying about the AeroBurner irons in our forum.

Specs

aeroburner_iron

 

Your Reaction?
  • 235
  • LEGIT52
  • WOW42
  • LOL36
  • IDHT22
  • FLOP34
  • OB24
  • SHANK361

44 Comments

44 Comments

  1. Shawn K

    Apr 2, 2015 at 8:57 am

    Rented Speed Blades a couple of times on vacation. I’m an 11 with decent club head speed and couldn’t hit the 4 iron. Scrap the 3,4 for Hybrids. That probably costs more though.
    Not to mention hitting the lip of a fairway bunker with my 6 iron, forgot it was a 5 iron.

  2. Jeff

    Mar 20, 2015 at 11:08 pm

    If the lofts are that big of a deal buy the 4 through AW set instead of 3-PW. I’m sure the slot thingy makes them an improvement on the 09 Burners and that’s a set I still see in play ALL THE TIME. I don’t see much difference between this year’s Callaway and Taylormade G I models, almost the same paint.

  3. KK

    Mar 14, 2015 at 8:53 am

    If you look at Maltby’s tests, you’ll see the CG on TM’s distance irons is nothing special. The classic Ping G5 has a lower CG. Big picture: there’s not much you can do to increase iron distance of cast clubs other than jack the lofts and lengthen/lighten the shafts. By the logic some of you guys are using, we should have 68 or 70 degree lob wedges right now to compensate for TM’s amazing tech developments. Stop

  4. Marcus Rogers

    Mar 13, 2015 at 3:30 am

    Wow. I saw this coming from a mile away. Soon enough your PW is going to be 38* and your 4 iron will be 15*

    STOP RUINING THE GAME TSHWAG

  5. tailormade

    Mar 12, 2015 at 8:32 pm

    6 degree gaps in the scoring clubs and three irons (4,5,6) under 26 degrees of loft?

    Surely someone at TM is having a good ol’ fashioned LOL. These are truly awful.

    • Daniel

      Mar 13, 2015 at 3:22 am

      Word. These are unplayable for every category of golfers.

  6. James

    Mar 12, 2015 at 3:13 pm

    Jesus Murphy………..My 5 iron has 29* of loft. 22* is just preposterous. I imagine they are forgiving but Ping builds the most forgiving clubs IMO, they still manage to get decent distance out of slightly stronger then players clubs. These look basically like the 2009 Burner irons with a “slot” on the bottom that does nothing unless you have Clubhead Speed. Players from this category usually dont have the speed to get the bennies of the slots.

    • Jer

      Apr 4, 2015 at 8:18 am

      I’ll couldn’t agree with you more. I’m almost embarrassed for TMAG anymore. To me it sends a negative message when u can’t stick to the cycle of revising your clubs like other OEMS, and must release and market more and more “gimmicks?”

      My interest died after R7 425 , and there tour preferred from 2010-2011 (mc,mb,cb) I couldn’t even tell you what there offerings are anymore as it’s literally a couple months and a new way to gain 10yds. Anyone playing TMAG should be hitting the ball 40% further then us using “inferior outdated” products from6 months ago, our technology is dead. (Last line attempt at sarcasm)

  7. Bobby Cunningham

    Mar 12, 2015 at 2:53 pm

    Wow TaylorMade, great innovation. These look drastically different from the 10 previous generations of garbage you have put out.

  8. Daniel

    Mar 12, 2015 at 12:15 pm

    And in this case “hits their short irons just fine” means that they have reasonable length, decent ballstriking and, above all, the proper gapping with 10-15 yards between clubs.
    Stretching these gaps to 20 yards does nothing but harm.
    And if their distances in the long end are already cramped since they lack the clubhead speed to hit a 26° 5-iron, what good is a 22° 5-iron? It will have even shorter carry.

  9. Daniel

    Mar 12, 2015 at 11:21 am

    Just a guess but it can’t be far off.
    My friends with 10+ handicaps hits their short irons just fine but struggles with anything longer than a 6-iron.
    They don’t need stronger lofted short irons, they need easier to hit long irons, but what TaylorMade is offering them is the opposite.

  10. Shane

    Mar 12, 2015 at 10:19 am

    2.5 yards of draw bias in an iron? You’re kidding right? How’s this done by changing the CG? No thanks TM!! I’m sticking to my Eye2+!

  11. Long Ball

    Mar 12, 2015 at 8:40 am

    Can you explain the formula you used to come up with those yardage gaps?

  12. Daniel

    Mar 12, 2015 at 4:28 am

    Never mind the number on the soles, with those lofts no way the player will get reasonable gapping. 20-25 yards between GW and PW, 5 yards between 5-iron and 4-iron.
    Good work Taylor Made.

  13. Long Ball

    Mar 12, 2015 at 12:15 am

    Trust me, the vast majority of people using these clubs are not “the fickle puma newbies”. Its the people who cant play the game without some help.

    The game needs these people to stay on the course and needs these clubs on the shelves.

  14. gocanucksfan123

    Mar 11, 2015 at 10:18 pm

    Lol I love the people trashing Taylormade’s lofts when they haven’t got a clue about how physics works. Educate yourselves, then give opinions please.

    • Jeffrey Trigger

      Mar 23, 2015 at 4:57 pm

      When I was a senior in high school, I had a set of MP-14’s. Of course I played a lot, and I loved those irons. I will also say that the MP-14 is to this day the most forged club I’ve ever played. As long as the strike was good (not fat or bladed), the ball didn’t waver off line very much on mishits.

    • Dylan

      Apr 8, 2015 at 10:43 am

      Am I the only one who thinks that high handicappers with stronger lofts would be the exact same as better players with weaker lofts because better golfers hit down on the ball which de-lofts the club, whereas high handicappers tend to sweep which doesn’t change the loft at all?

  15. Long Ball

    Mar 11, 2015 at 9:04 pm

    KK, I guess in short, I was suggesting the loft has to be adjusted to cater for the low CG. The end result being a 6 iron that launches like a 6 iron. If it launched like a four iron than they got the balance wrong. My experience with “shovels” as Mark puts it, (Im talking about “shovels” designed by club manufacturers with lots of coin), is they launch like the number suggests but go further and are forgiving.

  16. Long Ball

    Mar 11, 2015 at 8:39 pm

    Sorry, I assumed everyone would have realised I was suggesting the loft had to be adjusted so the trajectory was now back to a 6 iron and not an 8

  17. Mark

    Mar 11, 2015 at 8:35 pm

    Shovels.

  18. KK

    Mar 11, 2015 at 8:18 pm

    TM didn’t just work the back, they worked the front to hit like a 4 iron, lol. What % of the guys demoing these clubs will be able to hit the 6/4iron? Or even the 7/5 iron? That’s a small %. No wonder TM revenue is down.

  19. Long Ball

    Mar 11, 2015 at 8:09 pm

    Take a 6 iron, with a 6 iron shaft length & a 6 iron head weight, work the back of the head to make it much easier to hit for those who need that (isn’t this still the majority of golfers?). But now it has the trajectory of an 8 iron. Do you alter the number to 8?…. No! Its the length and weight of a 6 iron. Its a 6 iron that goes further and is easier to hit. Thank you TaylorMade!!!

  20. jgpl001

    Mar 11, 2015 at 7:53 pm

    These are ABSOLUTELY SHOCKING
    A 25.5 deg 6 iron……….so what next from the great TM machine? I can’t wait- YAWN

  21. KK

    Mar 11, 2015 at 7:45 pm

    Haha. The typical guy demoing these clubs won’t even be able to hit the 6 iron. They will have to club down to an 8 or 9 iron to get any consistency.

  22. Rich

    Mar 11, 2015 at 6:46 pm

    Exactly. It ain’t about the number on the bottom, it’s about how far you hit ’em.

  23. rgb

    Mar 11, 2015 at 5:36 pm

    Lemme guess. A+. I read a review from a couple of years ago about Miura irons….

    “Miura irons don’t include plastics, carbon fiber, adjustable weights, “super expanded sweet spots cones of power,” or, well, anything invented after roughly 1957.”

    Yea. That.

  24. kloyd0306

    Mar 11, 2015 at 5:17 pm

    TMAG could have saved themselves the effort of a new design and its manufacture by simply reproducing the Burner 2.0 irons and provide the buyer with a Sharpie to cross out the number on the sole and write over it with a smaller number.

  25. gwillis7

    Mar 11, 2015 at 3:57 pm

    True. Everyone does it, even mizzie and titleist. My goodness though, a 4 iron at 19 degree loft! Cally and Tm are the ones pushing the envelope with this. I have no problem with them coming out with clubs all the time, I could care less. But lofts are getting ridiculous now

  26. pk20152

    Mar 11, 2015 at 3:54 pm

    I wish TM would put out more club options – said no one ever.

  27. Golfraven

    Mar 11, 2015 at 2:36 pm

    For hcpers 15 and higher. Please raise the bar tiohcp 25 and above. Don’t see those flying if the shelves. those folks need those lofts to fly the bar any yards.

  28. ABOMB

    Mar 11, 2015 at 2:25 pm

    Damn, that iron is fat! And I don’t mean Phat!

  29. tim

    Mar 11, 2015 at 1:24 pm

    TM’s version of the Big Berthas.

  30. ArnoldD

    Mar 11, 2015 at 12:55 pm

    I guess TMAG proved you can redesign (AeroBurners), a redesign(SpeedBlades), of a redesign(RocketBlades), from a redesign (RocketBalls); while changing the name.

  31. Ryan Stewart

    Mar 11, 2015 at 12:01 pm

    6 degrees of separation between the PW and the AW? that is a huge gap for scoring clubs. you could comfortably fit another club in between those lofts.

  32. Todd

    Mar 11, 2015 at 11:35 am

    43 degree PW – WOW…that’s stronger than goat’s breath!

  33. kess

    Mar 11, 2015 at 11:35 am

    I look forward to the day that my set is driver, fw, hy, 7,8,9,pw,aw,gw,sw,lw,superlw,flat wedge, putter. That way I can say “oh, you needed a 4iron to get it 200yds. Weak sauce.”

  34. kess

    Mar 11, 2015 at 11:30 am

    Woo-hoo! Almost made it to the 40* pw! Come on tmag, you can do it!

  35. RobN

    Mar 11, 2015 at 10:53 am

    Oops, I thought I read that as 22.5°. But still, 25.5° for a 6 iron is nuts.

  36. Greg V

    Mar 11, 2015 at 9:32 am

    A 6-iron with a 25.5* loft is almost as strong as my AP1 4-iron (which I don’t use – ever).

    I am guessing that the target market for these would only need 6 to PW, and perhaps for many, only 7 to PW. Gap wedge(s) too.

  37. Jengus

    Mar 11, 2015 at 9:25 am

    Time to dig a snow cave because here comes the Avalanche.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

TaylorMade unveils all-new P770, P7MC, and P7MB irons

Published

on

TaylorMade Golf has today announced the latest evolution of its acclaimed P700 Series with the all-new P770, P7MC, and P7MB irons.

TaylorMade P770 Irons

The all-new P770 irons feature a thinner top line, less offset in long irons, and a shorter blade length when compared to the P790. With its hollow body construction and forged L-Face, the 2022 P770 is designed to provide elevated distance, forgiveness, and excellent feel in a smaller sized head.

The P770 features FLTD CG, a strategic design that positions the center of gravity (CG) lowest in long irons and progressively shifts it higher throughout the set to the shorter, weaker lofted irons. The tungsten weighting scheme in the long and middle irons has been redesigned, shifting more weight to the longer irons’ low tungsten mass and a reduction in the middle irons’ tungsten, resulting in an ascending CG through the set.

The aim behind the FLTD CG strategic design is to create easier launch and playability in the long irons while optimizing trajectory and spin in the scoring clubs. 

The P770 irons feature SpeedFoam Air, a technology introduced in 2021 with the launch of the P790. SpeedFoam Air dampens sound and strategically supports the face with a material 69 percent less dense than SpeedFoam, which was seen in the prior generation of the P770.

In addition to the added speed made possible by the thinnest P770 face TaylorMade has produced, the Thru-SlotSpeed Pocket and Inverted Cone Technology aim to help unlock increased ball speed across the face and forgiveness low in the face, where mishits happen most commonly.

“P700 Series irons need to be technical, elegant and timeless and the new P·770 design has all of that in spades. We wanted to take as much performance and hide it on the inside of the iron to where you look at it and it looks like a clean and classic iron with the pearl satin chrome finish and hint of mirror on the toe. On the inside, the technology we have poured in to this iron creates a product that we believe is truly one of one in this space.” – Matt Bovee, Director, Irons Product Creation

Specs, Availability & Pricing

  • Specs: P770 is offered in 3-PW/AW and comes equipped with KBS Tour Steel shafts (X130g, S 120g) as well as Golf Pride Z-Grip 360 in Grey/Black
  • Availability: Pre-order on December 6 at TaylorMadeGolf.com and at retail beginning January 20, 2023
  • Pricing: $1299 USD (steel) and $1499 USD (graphite)

TaylorMade P7MC Irons

The tour-inspired P7MC iron features minimal offset and perimeter weighting.

A narrow sole and tight leading edge aims to ensure consistency through the turf, while TaylorMade’s Compact Grain Forging process uses 2,000 tons of pressure, more than double the industry standard, with the additional force giving TaylorMade engineers precision control at a micro level, producing a tighter grain structure for the best possible feel and strength properties.

Compact Grain Forging seeks to deliver a refined composition inside and out, with the sophisticated craftsmanship coming to life with a satin finish and forged “Metal-T” within the cavity back.

Per TaylorMade, precision in P7MC is paramount, which is why the face of this iron is continued to be machined. Machining the face aims to ensure precision and quality with TaylorMade’s most aggressive score line geometry for exacting shot making.

“There’s no better feeling than a solidly hit forged iron. For pure ball strikers, the consistency of P7MC rivals anything in the marketplace today and has been a favorite among skilled golfers. For players who choose to combo, our cohesive design language allows you to seamlessly pair it with either P770 or P7MB. No two golfers play the game exactly alike, and one of the things I love about our P·700 Series family is the ability for golfers to personalize a set to match their needs and maintain aesthetic unity.” – Matt Bovee, TaylorMade Golf, Irons Product Creation

Specs, Availability & Pricing

  • Specs: P7MC is offered in 3-PW and come equipped with KBS Tour Steel shafts (X130g, S 120g) as well as Golf Pride Z-Grip 360 in Grey/Black
  • Availability: Pre-order on December 6 at TaylorMade Golf.com and at retail beginning January 20, 2023
  • Pricing: $1299 USD (steel) and $1499 USD (graphite) as seven-piece sets

TaylorMade P7MB Irons

As a result of detailed feedback from testing with Rory McIlroy and Collin Morikawa, the P7MB features a shorter blade length, brand new sole geometry, and progressive offset to create a minimalist profile that’s designed to control shot shape and trajectory.

The sole of P7MB is one millimeter narrower than the previous generation, meaning TaylorMade engineers had to add slightly more bounce to the leading edge which creates a completely different sensation through the turf. Total effective bounce is a combination of sole width and bounce angle, which engineers were able to perfect by increasing the bounce angle to keep the sole from getting caught in the turf.

The shorter blade length of P7MB allowed TaylorMade engineers to create an updated backbar using symmetrical geometry. This allows for more mass to be positioned directly behind the face to support the point of impact and elevate feel.

In addition, the P7MB also features the Compact Grain Forging and machined face and grooves that are also seen in the P7MC irons.

“The narrower sole width of P7MB is a direct result of testing and feedback from Rory McIlroy, Collin Morikawa and our TaylorMade Tour pros. Rory and Collin worked with us to identify the right sole geometry and bounce to match what they were looking for and we perfected that with P7MB. Having two of the best players in the world being a driving force behind the design of this iron have us extremely excited to bring it to the marketplace.” – Matt Bovee, Director, Irons Product Creation

Specs, Availability & Pricing

  • Specs: P7MB is offered in 3-PW and come equipped with KBS Tour Steel shafts (X130g, S 120g) as well as Golf Pride Z-Grip 360 in Grey/Black
  • Availability: Pre-order on December 6 at TaylorMade Golf.com and at retail beginning January 20, 2023
  • Pricing: $1299 USD (steel) and $1499 USD (graphite) as seven-piece sets
Your Reaction?
  • 34
  • LEGIT4
  • WOW2
  • LOL4
  • IDHT0
  • FLOP4
  • OB3
  • SHANK10

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (12/6/22): Mint JDM Toulon San Diego putter

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a mint JDM Toulon San Diego putter

From the seller (@wam78): “JDM Toulon San Diego  $325 OBRO shipped. Rare satin finish only a small amount released. 34” length standard loft and lie. KBS matte black shaft professionally built by local builder. Original grip and headcover. Mint shape!. s/20 weight plate.”

To check out the full listing in our BST forum, head through the link: Mint JDM Toulon San Diego putter

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 0
  • LEGIT0
  • WOW1
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (12/5/22): ‘Greatest Personal Golf Cart EVER!’

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for the “Greatest Personal Golf Cart EVER!”

From the seller (@hibcam): “”This is probably the best value for a fully functional Golf Cart that you can find!!! This SoverSky 3 wheel Golf Cart has been FULLY UPGRADED and is an AMAZING Golf Cart! The Cart comes with an upgraded Golf bag holder- this has been strengthened with newly welded rods for more support. This comes with a perfectly fitting Cooler and a holder for your bluetooth speaker. This also comes with an easy to grab Rangefinder holder on the handlebars. The rear axle has been replaced with a faster rear differential and has speeds up to 29 mph. This also comes with a Lithium 60v/ 20ah battery that will run for 36 holes on one charge. 323 miles on this cart. Transports easily in a standard PickUp truck. RETAILS FOR OVER $2500 WITHOUT UPGRADES!! JUST $1299!! LOCAL PICKUP ONLY!! Los Angeles Area- San Fernando Valley.”

To check out the full listing in our BST forum, head through the link: “Greatest Personal Golf Cart EVER!”

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 6
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP1
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending