Equipment
Scotty Cameron goes high tech with new GoLo putters
Scotty Cameron’s new GoLo 3, GoLo 5, GoLo 5R and Golo 6 putters merge aluminum and stainless steel in a innovative way that the putter maker says could influence his future designs.
Designing putters is a process, Cameron said, but the driving force of the new line was his curiosity about putter inserts.
[quote_box_center]“I’d always wondered, with a conventional insert, if you hit it thin – which is very common considering putting surfaces are rarely level – do you hit the portion of the putter face below the insert?” he said. “And how does that affect the feel and performance? Inserts are used for feel, not for performance. But performance is, in part, due to feel. So, I thought, why not just take the seam out?”[/quote_box_center]
Cameron explored eliminating the seam that inserts create below the center of the face, which he accomplished with what the company is calling a Face-Sole Core.
The Face-Sole Core is made from aircraft-grade, anodized aluminum, and constitutes the entirety of the face and midsection of the putter. It’s wrapped in a heavier, 303-stainless steel frame that gives the putter its shape and has performance benefits as well.
[quote_box_center]“The goal of the design was to move the weight out of the midsection and enhance the perimeter weighting like a horseshoe around the outside to create higher moment of inertia and increase the resistance to twist,” Cameron said. “So the more we can get a horseshoe, getting the weight out and back, the better off we are on off-center hits.”[/quote_box_center]
The aluminum Face-Sole Core and stainless steel frame are joined with a vibration dampening system — rubber bars that sit between the two pieces and keep them from touching — to give the putters a softer feel than previous GoLo putters.
The last, and maybe one of the most important feature of the putters is their new four-way sole design, which is shaped in such a way that the putter will not sit opened or closed when it is soled at address.
“IT SITS DEAD CENTER,” CAMERON SAID.
To prove his point, Cameron spun one of the new GoLo putter heads on a glass table to show how it would rotate 360-degrees in perfect balance.
[quote_box_center]“Hardly ever are you on a flat surface on a putting green, so we made the draft angles perfect in each direction, front-to-back, heel-to-toe, so that you’re not going to snag the ground,” he said. [/quote_box_center]
The GoLo putters ($379) have Cameron’s Silver Mist finish and use the company’s 10-inch, 77-gram Matador Red Midsize grips. They’ll be in stores April 3.
See photos of each of the five new models in the slideshows below. Click here to see what GolfWRX Members are saying about the new putters in our forum.
Scotty Cameron GoLo 3
Lengths: 33, 34 and 35 inches
Neck: Flare
Toe Flow: Maximum
Offset: Three-quarters
Stock Head weight: 350 grams
Scotty Cameron GoLo 5
Lengths: 33, 34 and 35 inches
Neck: Single Bend
Toe Flow: Near Face Balanced
Offset: Full Shaft
Stock Head weight: 350 grams
Scotty Cameron GoLo 5R
Lengths: 33, 34 and 35 inches
Neck: Single Bend
Toe Flow: Near Face Balanced
Offset: Full Shaft
Stock Head weight: 350 grams
Scotty Cameron Golo 5R Dual Balance
Lengths: 33, 34 and 35 inches
Neck: Single Bend
Toe Flow: Near Face Balanced
Offset: Full Shaft
Stock Head weight: 400 grams
The Golo 5R Dual Balance has a stock length of 38 inches and a 50-gram counterweight under the butt end of the grip.
Scotty Cameron Golo 6
Lengths: 33, 34 and 35 inches
Neck: Single Bend
Toe Flow: Near Face Balanced
Offset: Full Shaft
Stock Head weight: 350 grams
Click here to see what GolfWRX Members are saying about the new putters in our forum.
- LIKE250
- LEGIT53
- WOW38
- LOL24
- IDHT9
- FLOP67
- OB21
- SHANK84
Whats in the Bag
Steve Stricker WITB 2024 (April)
- Steve Stricker WITB accurate as of the Zurich Classic. More photos from the event here.
Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X
3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX
Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X
Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5
Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore
Putter: Odyssey White Hot No. 2
Ball: Titleist Pro V1x
Grips: Golf Pride Tour Velvet Grip Rite
Check out more in-hand photos of Steve Stricker’s clubs here.
- LIKE5
- LEGIT0
- WOW0
- LOL0
- IDHT1
- FLOP0
- OB0
- SHANK0
Whats in the Bag
Alex Fitzpatrick WITB 2024 (April)
- Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X
Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX
Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)
Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X
Putter: Bettinardi SS16 Dass
Grips: Golf Pride MCC
Check out more in-hand photos of Alex Fitzpatrick’s clubs here.
- LIKE2
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss
In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
- driveandputtmachine: “Still playing a MIni 300. The head was only 208, so I ordered a heavier weight and play it at 3 wood length. I am playing a Ventus Red 70. I play 70 grams in my fairways. I use it mainly to hit draws off the tee. When I combine me, a driver, and trying to hit a draw it does not work out well most of the time. So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck. The 300 Mini is very good off the deck.”
- JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”
Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”
- LIKE3
- LEGIT1
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK4
-
19th Hole2 weeks ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole4 days ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole2 weeks ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole4 days ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole1 week ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole2 weeks ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole1 week ago
Brandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
Bob
Apr 27, 2015 at 10:32 am
Go back to making Anser clones.
Joe Duffer
Mar 21, 2015 at 2:14 am
Huge pile of steaming…
Mike
Feb 5, 2015 at 10:34 pm
obviously the majority of the people on this site have never experienced a Cameron experience. Scotty would not throw a piece of junk out. He has to continue to make putters to please the people and why not try and improve the putter game.
Ballstrikaaa
Jan 26, 2015 at 11:20 pm
Uhhh……I’m still waiting for the fins and top side whale tail attachment. I hate to jump on the
bandwagon of dissenters here, but goodness gracious “as Jack would say,” these offerings
are hideous. I remember when Scotty’s over priced tools sold for $299 a pop, but the designs
were smooth and clean without over designed head covers. At $379, he has officially lost me.
Michael M
Jan 25, 2015 at 8:40 pm
#6 should be called the apple bottom putter. waht an ugly fricking putter.
Matt Heister
Jan 24, 2015 at 8:53 am
Hope he makes a CS. Holy cow!
Raven
Jan 22, 2015 at 1:08 pm
If you are hitting a putt that thin then the seam is probably the last of your problems. The best feeling Camerons to me are the ones which use a 303SS face, take that away and they are just another cookie in the pot.
Mike M
Jan 22, 2015 at 12:43 pm
He is creative, besides, who looks at the sole plate when putting. You know he has the data to back up his claims or he wouldn’t be doing them. I just wonder why there doesnt seem to be a center shafted model like the GoLo 5S offered today. To me it has the best look from the grip to the ball. The price ? You didn’t think it ws going to be cheaper did you?
The gentlement to resonded about getting a used Del Mar, that is a good thought, I would be suprised the price of a used GSS 009 isn’t doubled after Jimmie Walkers win this past weekend.
Steve
Jan 22, 2015 at 4:52 pm
Definitely, everyone is going to want Jimmy, I repeat Jimmy Walkers putter because he won the Sony. What is the big news with this putter, huh right, the insert goes to the bottom. Charge $379 for that sounds like a bargain. Get a metal x putter for $50, but you don’t get the Scotty headcover showing in your bag. Mmmm, have to rethink this. there are a lot of great Cameron putters these are not one of them
Joey
Jan 22, 2015 at 12:08 pm
Looks like a ‘B’ on that Golo 6 putter. Pretty grotesque.
Mike
Jan 22, 2015 at 11:13 am
I guess this is the beginning of the end for the Scotty Cameron run on putters. These look absolutely horrible!
Steve
Jan 22, 2015 at 10:28 am
$379 for a putter with a insert putter? Cameron is losing their mojo. But 99% of Cameron’s are sold because of status not performance. Not saying they don’t make or have made great putters. But….. You know the rest
Duncan Castles
Jan 22, 2015 at 10:17 am
$379???
TR1PTIK
Jan 22, 2015 at 7:22 am
Not a fan. Even though I have an Odyssey White Hot Pro and know what it feels like to hit it thin, I just don’t like the look of these enough to ever spend the ridiculous amount of money he wants for them. I’d rather spend that kind of money on an Odyssey Mextal-X Milled or Works putter. Or, I could just track down a lightly used California Del Mar for considerably less than any of those.
Eagle006
Jan 21, 2015 at 8:29 pm
These look like they were designed by a 9 year old Transformers fan. He sure does churn out some junk these days. What happened to the classic designs like the Teryllium or Studio stainless series?
Preston
Jan 21, 2015 at 6:55 pm
Why an aluminum insert? Can i wrap a beer can around my putter and get an idea of the feel of the insert?
Bryan
Jan 23, 2015 at 11:25 am
I hope you’re not serious. They used to make beer cans out of steel, in fact some beer companies still use steel cans. Can I just take one of those, put a shaft in it and get an idea of the feel of a steel head putter?
mark d
Jan 21, 2015 at 6:05 pm
Common sense prevails. Now do one on a Newport or Newport Two design, nothing funky-looking from address (like the old Terylliums), keep the graphics (relatively) calm and you’ve got the whole smash. My 2¢.
slider
Jan 21, 2015 at 5:47 pm
these look nice another gem from scotty
Rich
Jan 21, 2015 at 9:30 pm
Really? Are you looking at the same putter I just did? To each their own I guess.
Mike
Jan 21, 2015 at 5:42 pm
Any Left Handed Options??
Kim
Jan 21, 2015 at 5:12 pm
Golfsmith was doing an insert that went to the bottom of the face about 10-15 years ago and I wondered why nobody else did it. The hitting it thin miss kept me from using insert putters so will be interesting to try this one.
Bryan
Jan 21, 2015 at 5:09 pm
Wow, can anyone say rip off of Ping’s B60??? Maybe that’s why he’s calling that one GoLo 6…
RG
Jan 23, 2015 at 11:06 pm
This ain’t the first time he’s ripped off Ping.
Nice
Jan 21, 2015 at 5:05 pm
Is Scotty drinking the Taylormade koolaid? What’s up with releasing putters on top of putters?
LOL
Jan 21, 2015 at 4:53 pm
LOL.
Why not forget the insert altogether and just make it all solid like it used to be?
Josh
Jan 22, 2015 at 11:03 am
Increased MOI. But I don’t think I can stand the looks of these to justify a slight MOI increase…
Juan Carlos
Jan 21, 2015 at 4:49 pm
Scotty must been spending too much time at the local Hooters, cause the GOLO 6 looks like a pair O Jugs if you know what I mean…. ( . Y . )
Jay
Jan 22, 2015 at 7:15 pm
Put a couple of turbulators on the back of them and……
RG
Jan 23, 2015 at 11:07 pm
And some sliding weights…