Connect with us

Equipment

Scotty Cameron Futura X5 and X5R Putters

Published

on

Oversized putters were once a rarity in professional golf, but not anymore. These days, they’ve become the norm, with as many as 50 percent of PGA Tour players using them each week on Tour.

Scotty Cameron’s new Futura X5 and X5R are a result of the increased demand for larger putters by the world’s best players.

“The Futura X5 mallet is for someone who likes the stability of a bigger head, the feel of a bigger grip and likes to look down and see more lines for alignment purposes,” Cameron said. “X5 is more of a mechanical shape where the X5R is a softer, rounder shape. There’s no right or wrong. Same performance, same weight, same feel. It all depends on what you like to look at.”

Futura X5

Futura_X_Player_Position_X5_1416x2100_300_RGB

 Futura X5R

Futura_X_Player_Position_960x1490_300_RGB

Both putters have a multi-material design that includes a 303 Stainless Steel body and a 6061 aluminum sole plate. The use of aluminum extends into the “wings” of the putters and allowed Cameron to move weight to their extreme perimeter. That improves a putter’s stability and resistance to twisting.

And there’s another, not-so-hidden benefit to larger putters.

“The bigger the head, the more lines you can add for alignment,” Cameron said. “We worked with many players on tour and in the Putter Studio during the development of X5 and they all told us the same thing: It adds confidence.”

Futura X5

Futura_X5_Back_Profile_1510x2100_300_RGB

Futura X5R

 

Futura_X5_R_Back_Profile_1510x2100_300_RGB

The X5 and X5R putters also have single-bend shafts with a higher bend point that make them face-balanced.

“The single bend came from taking feedback from the tour and working with players in the Studio. Double bends have been around for years and for X5 we really wanted to clean up the look,” Cameron said. “We had many players say they wished that the shaft leaned at their target or on their line, so we worked to find the proper offset and lean of the shaft so, at address, the bend lines up pointing right at your target. That was a key one because the mechanical-industrial shape of the head and the clean mechanical-industrial bend match perfectly. What I didn’t want was a heavy, flowing bend onto a mechanical head.”

Each model has a 10-inch Matador Red Midsize grip that weighs 77 grams.

“The grip can complement or kill the design of the putter,” Cameron said. “I know that sounds strange, but grips make a difference. With blades, it’s a little more handsy, a little more flowing, a little more feel. With Futura X putters, it’s a little more robotic, a little more square-to-square and this larger Matador grip complements the head very well.”

The Futura X5 and X5R putters ($349) will be in stores on Oct. 31. They both have Cameron’s Silver Mist finish are are available in lengths of 33, 34 and 35 inches. For lefties, the X5 is available in lengths of 33, 34 and 35 inches.

Click here to see in-hand photos of the Futura X5 and X5R from the PGA Tour.

Futura X5 Dual Balance

X5_All_Bouquet_2100x1265_300_RGB

A Futura X5 Dual Balance ($399) will also be available on Oct. 31. It has an extra 50-gram weight located under its aluminum sole plate, which is counterbalanced with a 50-gram weight in its 15-inch grip that can help smooth out certain golfer’s strokes.

Stock length is 38 inches, but lengths of 36-to-40 inches in 0.5-inch increments are available by custom order.

Click here to see in-hand photos of the Futura X5 and X5R from the PGA Tour.

Your Reaction?
  • 75
  • LEGIT12
  • WOW17
  • LOL3
  • IDHT2
  • FLOP8
  • OB1
  • SHANK18

26 Comments

26 Comments

  1. j T

    Jan 20, 2015 at 10:39 pm

    I have every top line putter ever sold seriously and played them all but folks when you put a scotty in your hand you know it the feelins is totally exhilarating I would describe it as getting out boy a vega in to a Cadillac

  2. DBN

    Dec 18, 2014 at 4:11 pm

    Umm why doesn’t everyone keep there opinions are so valuable since none of them are on tour. Lets get some responses to those who have actually tried the putter!! Tried it and loved it!! can’t beat a scotty and the way the ball releases off the face!!

  3. Rich

    Oct 16, 2014 at 5:15 pm

    Yes the design is copied but as stated a few times below, it happens all the time in this industry. I think they are beautiful putter and from reading the article attached, it would seem at least there has been some thought go into the finer detail of these putter. I’m looking forward to seeing what they are like in hand.

  4. dko

    Oct 16, 2014 at 10:53 am

    I wish, I wish, I wish … I could afford a Scotty Cameron putter.

  5. TT X

    Oct 15, 2014 at 3:33 pm

    He copied an Odyssey and the Yes Sandy which is more round on the wings. The Odyssey was well before the YES which was 2012. Callie is an Anser style and Tracy has an Anser body but a double bend face balanced shaft. No hosel.

    • Kmac

      Oct 15, 2014 at 6:43 pm

      Who cares? He makes great putters. They mass produce.

      • TT X

        Oct 15, 2014 at 8:24 pm

        Didn’t say he doesn’t make great product, simply stating the facts as they are.

        • JB

          Oct 16, 2014 at 1:44 am

          All this nonsense about who copied who. Are we 12? Who cares, IMO. If it makes me a better putter, copy it from Tommy Armour for all I care.

          • Don Koo

            Oct 16, 2014 at 10:51 am

            Yup. Well said. EVERYTHING on the market today is a variation of something already there.

          • TT X

            Oct 16, 2014 at 11:32 am

            As long as the designer is compensated it shouldn’t matter copied who.

  6. Jeff

    Oct 15, 2014 at 3:24 pm

    I think the odyssey #7’s popularity came from the Yes! Tom Watson used in almost winning the 2009 Open Championship. So it’s not really surprising to see the design make the rounds.

  7. Kevin

    Oct 15, 2014 at 2:25 pm

    Any idea why they didn’t make the face deep milled like the Select line?

    • JB

      Oct 16, 2014 at 1:46 am

      I was wondering the same thing. Wonder if the deep mill didn’t really benefit that big of head?

  8. Tom D

    Oct 15, 2014 at 10:53 am

    Should’ve named the X7, since they are obviously the Odyssey #7 shape.

  9. Will

    Oct 15, 2014 at 10:39 am

    Yes, this putter looks very similar to the odyssey #7 or sabertooth. But for those of you complaining about the similarities I hope you also complain about any anser/Newport style putter from Odyssey, Taylormade, Cleveland, see more etc as those are just a copy of the original Ping anser.

    I have used an odyssey #7 for years now but I’m looking forward to a deep milled version.

  10. GR

    Oct 15, 2014 at 10:35 am

    Zac, thanks for your articles and information. They are very helpful.

    I do have a question though. Due to a tendency toward pulling putts, I have changed to center shafted mallets with a more straight back and forth putting stroke. However, I see mostly heel shafted (like the Futura outlined). More than likely it is a demand issue. What is the % of pros and/or golfers that use the center shafted putters? Any recommendations? Thanks.

    • Zak Kozuchowski

      Oct 15, 2014 at 10:56 am

      Center-shafted putters are rare on tour, but some players swear by them. It’s all about preference and confidence.

      I used to play a center-shafted mallet as well, but I’ve since switched to a heel-shafted mallet after I saw that I got better numbers with those models on a SAM PuttLab. If there’s a SAM in your area, I’d recommend that you try it. Otherwise, guess and check is a great process.

      And if your putter is working for you, why switch?

      Thanks for reading, GR.

  11. Food

    Oct 15, 2014 at 9:58 am

    Gimme some seed, I’ll go till the field with these and feed the world with the food I can grow

  12. Baka

    Oct 15, 2014 at 9:51 am

    Blatant copy of Odyssey Tank Cruiser and Versa #7 putters. At Titleist, we don’t innovate we imitate.

    • Joe W

      Oct 15, 2014 at 10:18 am

      everyone copies everyone for the most part. they just add their little/tiny differences to the mock up.

      • Lane

        Oct 15, 2014 at 1:06 pm

        True, but I think the Cameron X5 looks better than its predecessors. IMO, it’s imitated AND improved.

    • t-ball

      Oct 15, 2014 at 10:46 am

      If we want to blame Scotty for copying, we have to blame Odyssey too ! I think the first version of this style head was a YES Callie. Plus, you really can’t compare a plastic insert to a deep-milled face.

      • Jeff

        Oct 15, 2014 at 3:20 pm

        Tracy. Callie’s a blade.

        • Rich

          Oct 16, 2014 at 5:09 pm

          Tracy is a blade too. Tracy was a face balanced blade and Tracy II was a short slant neck blade.

  13. JB

    Oct 15, 2014 at 9:48 am

    This just made my day! Counting down the days!!

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Michael Block WITB 2024 (May)

Published

on

  • Michael Block what’s in the bag accurate as of the PGA Championship.

Driver: TaylorMade Qi10 “Dot” (9 degrees @7.5)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 Tour (15 degrees @14.25)
Shaft: 2024 Fujikura Ventus Blue 7 X

5-wood: TaylorMade M5 (19 degrees @17)
Shaft: Mitsubishi Tensei CK Orange 70 TX

Irons: TaylorMade Stealth UDI (4), TaylorMade Proto (5-9)
Shafts: Graphite Design Tour AD DI Hybrid 85 X (4), Project X 6.5 (5-9)

Wedges: TaylorMade Milled Grind 4 (46-09SB, 60 [unconfirmed]), TaylorMade Milled Grind 2 (52-09S, 56)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putter: Odyssey White Hot 2-Ball

Grips: Golf Pride MCC

See the rest of Michael Block’s WITB in the forums.

Your Reaction?
  • 9
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK3

Continue Reading

Whats in the Bag

Brooks Koepka WITB 2024 (May)

Published

on

  • Brooks Koepka what’s in the bag accurate as of the PGA Championship.

Driver: TaylorMade Qi10 “Dot” (10.5 degrees @9.75)
Shaft: Mitsubishi Diamana D Limited 60 TX (44.5 inches, tipped 1 inch)

3-wood: TaylorMade M2 Tour HL (16.5 degrees)
Shaft: Mitsubishi Diamana D+ 80 TX

Irons: Nike Vapor Pro (3), Srixon ZX7 Mk II (4-9)
Shaft: Fujikura Pro Tour Spec 95 X (3), True Temper Dynamic Gold Tour Issue X100 (4-9)

Wedges: Cleveland RTX ZipCore Tour Rack Raw (46-10 Mid), RTX6 ZipCore Tour Rack (52-10 Mid, 56-10 Mid, 60-6 Low)
Shaft: True Temper Dynamic Gold Tour Issue X100 (46), True Temper Dynamic Gold Tour Issue S400 (52-60)

Putter: Scotty Cameron T-5.5

Grips: Golf Pride Tour Velvet Cord (Midsize)

Ball: Srixon Z-Star Diamond

Check out more in-hand photos of Brooks Koepka’s clubs here.

Your Reaction?
  • 4
  • LEGIT0
  • WOW1
  • LOL1
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (5/13/24): Full set of ‘Tiger Slam’ clubs

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a full set of ‘Tiger Slam’ clubs.

From the seller: (@CaymanS): “During the year of recovery from leg surgery that never quite healed, I was bored.  One thing led to another, and I ended up gradually building/acquiring the individual pieces to complete a set of “Tiger Slam” clubs.  They are what Tiger played to win 4 consecutive majors, which nobody has ever done.  This is not an exact replica of course, but something close that fit me to play a few times per year and experience what Tiger did.  But my bad leg, 4 shoulder tears, and age prevents me from the ball-striking needed to enjoy these to their fullest.  They may not be everyone’s cup of tea, especially since the driver and fairway shafts are regular flex and most players good enough to play these will need to change them, but it’s not a perfect world.  I am not a historian on this stuff, but my research indicates these are the same models Tiger used, with slightly different specs to fit me.

Full set $1,600, or…

…a donation for a Pro Kids fundraiser, or…

Driver: $70

Fairway: $250

Irons: $1,100

Wedges: $100

Putter: $350″

To check out the full listing in our BST forum, head through the link: Full set of ‘Tiger Slam’ clubs

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 13
  • LEGIT2
  • WOW1
  • LOL0
  • IDHT0
  • FLOP1
  • OB0
  • SHANK5

Continue Reading

WITB

Facebook

Trending