Equipment
TaylorMade SLDR Fairway Woods and Hybrids
Like TaylorMade’s SLDR driver, the company’s new SLDR fairway woods and hybrids promise golfers more distance from a lower, more forward center of gravity.
The SLDR fairway woods and hybrids have a new version TaylorMade’s “Speed Pocket,” which is no longer indented into the front of the sole like previous models. While it’s smaller than the Speed Pocket featured on the company’s RBZ Stage 2 fairway woods and hybrids, it now slices completely through the sole, creating a gap that is filled with the same polymer the company used in the design of its RocketBladez and SpeedBlade irons.
Mike Ferris, vice president of product marketing for TaylorMade, said that the new Speed Pocket makes the SLDR fairway woods even lower spinning and higher launching than previous models. The 1 mm more forward CG creates an estimated 200-to-300 rpm reduction in spin and a 1-degree increase in launch angle, giving golfers two options to improve their fairway wood and hybrid play. They can use the additional ball speed created from the clubs’ lower, more forward center of gravity to hit their fairway woods and hybrids farther, or they can choose to play higher-lofted models, which will allow them to raise their trajectory.
The draw back of moving weight lower and more forward in a club head is that it lowers a club’s moment of inertia (MOI), or its resistance to twisting on off-center hits, which decreases a club’s forgiveness. But Ferris stressed that the revamped Speed Pocket more than makes up for the loss of forgiveness, because it adds additional spring-like effect that improves the ball speed of shots struck off-center.
SLDR 3 Wood at address
SLDR 3 Hybrid at address
Note: The small alignment line positioned behind TaylorMade’s “T” logo will not be added to the retail versions of fairway woods and hybrids.
In 2013, 15 percent of the fairway woods TaylorMade sold were its “high launch” models, which have the shape of a 3 wood or 5 wood, but are designed with more loft to help boost launch angle. In 2014, Ferris said he expects that number to grow to 25 percent of TaylorMade’s fairway woods sales, as more golfers realize the benefit of hitting higher-launching, lower-spinning shots.
“The loft of fairway woods has been evolving,” Ferris said. “We think it’s good to be able to play a 4 wood instead of a 3 wood.”
Many tour players, including 2013 U.S. Open champion Justin Rose, have embraced higher-lofted fairway woods, which they are able to hit the same distance as their older, lower-lofted fairway woods but with a higher trajectory. And for golfers such as Rose, having more loft on a fairway wood has a visual benefit as well.
“It gives me more confidence to look down at a fairway wood and see more loft, especially if I know that it’s going to fly just as far,” Rose said.
The SLDR fairway woods and hybrids have a 3-degree range of adjustability (+/- 1.5 degrees), which is adjustable in 0.5-degree increments. They are made to be “visually square” at address, which means that in the neutral setting they will have a face angle that measures 2 degrees open.
The fairway woods are smaller in size than their predecessor, TaylorMade’s RBZ Stage 2 Tour, with the SLDR 3 wood measuring 20 cubic centimeters smaller (155cc versus 175cc), while the hybrids are about the same size as last year’s models. The combination of the shallower fairway wood heads and slightly shorter shaft lengths (both the fairway woods and hybrids are 0.25 inches shorter than TaylorMade’s RBZ Stage 2 Tour models) should make the clubs more playable for the majority of golfers.
The SLDR fairway woods and hybrids will be available starting Nov. 15. The fairway woods will sell for $249 ($349 with TaylorMade’s TP shafts), and the hybrids will cost $219 ($289 with a TP shaft).
Additional specs from TaylorMade
Equipment
Building the Bag: How Neal Shipley’s switch-up on spin has developed his setup
Neal Shipley survived “Golf’s Longest Day” to qualify for the U.S. Open next week at Shinnecock Hills Golf Club, and is set to make his first appearance at his national open since he earned low amateur in 2004. So what better time to be featured in another edition of “Building a Bag.”
It’s also a significant time for Shipley to have a breakdown of his setup featured here at GolfWRX, as the Ohio State alum has been through some substantial gear changes over the past few months to combat one thing – over-spinning the golf ball.
So let’s dive into Shipley’s setup:
Big changes start with the ball
Shipley’s major bag update for this season has been a change in golf balls. Initially, in the Titleist Pro V1, Shipley had to remove loft from his long irons to tackle the fact that he overspins the golf ball. But after testing and transitioning to the Pro V1x Double Dot, he was able to find the right numbers and also launch the ball higher.
“I’ve struggled with spin for a long time and I was battling that, especially in my longer irons and had to take a lot of loft off,” Shipley told GolfWRX. “So I struggled when I got the irons in the right spin rates in the right spin windows, not getting enough height. So I was able to go to this ball and add loft, get the lunch I need, without really adding too much spin.”
The lower-launching and lower-spinning Pro V1x variant is a golf ball that transformed Cameron Young’s game and plenty of players have tested it out on Tour, including Kris Ventura and Jhonattan Vegas.
“It’s been nice to kind of launch the ball a little bit more and get some height more with my launch rather than with the ball downfield,” Shipley added. “So it’s been a nice addition. It’s really good in crosswind. It’s great off the tee.”
Soft stepping experiment
From 5- to 9-iron, Shipley plays Ping’s Blueprint T irons, of which he believes are “one of the cleanest looking blades out there.”
The model has been in his bag even before they even went to retail. What’s most interesting about his iron setup, though, is what he’s doing with the shafts.
Shipley plays Dynamic Gold X100 120 shaft, a pretty common shaft out on Tour. What he and the Ping team have begun experimenting with is soft-stepping, for a few reasons.

“Trying and get a little more, just touch, more height and spin on the ball, a little more deflection,” Shipley said on the process of changing the stiffness of a set of irons by putting the lower-numbered iron shaft throughout the set and changing the distance from the first step in the shaft to the hosel. (ie. The 8-iron shaft is put in the 9-iron and so forth.)
Essentially, the shift makes the shaft slightly weaker by cutting more off the butt end of the club. The change aligns with the ball swap, with Shipley’s freedom now to launch the ball higher with loft without it overspinning. Shipley has also done the same to his i240 4-iron.
No need to de-loft
Shipley plays some of the lowest-lofted clubs out on the PGA Tour. His older Ping G440 LST has just 6.8 degrees of loft – yes, you read that correctly!
Now with the ability to add more loft, thanks to the golf ball change, Shipley’s current driver is at 7.6 degrees. The 9-degree LST head is cranked down on Big Minus on the Ping adapter hosel.

It’s still a stout build, however, as Shipley plays a Fujikura Ventus TR 7x that has been tipped at 2 inches. He also uses the heaviest high-density tungsten back weight available at 35 grams.
More than just the stamps
Shipley was the first to admit that he enjoyed his food while in college. But since his days at Ohio State, he’s slimmed down and earned a PGA Tour Card.
That hasn’t stopped him from having fun with his wedge stampings, though it’s led to some misunderstandings.
On the 54 (degree), we have ‘Big Fudge,'” Shipley said. “It was supposed to be ‘Big Fridge,’ so this happened a little while ago. ‘Big Fridge’ was a nickname between my college teammates and I, with ‘fridge’ meaning stomach, a big stomach.

“We told the Ping guys to put … ‘Big Fridge’ on it, and I think maybe some bad cell service or something, and they thought I said ‘fudge,’ so they put fudge on it.”
On Shipley’s 50-degree he also continues the food theme, this time with his go-to order at the “Golden Arches,” and his stamping “DONS 7.”
“The number 7 meal, the two cheeseburger meal, that was my McDonald’s order, back when I would have McDonald’s frequently,” Shipley shared.
There’s more to just the stamping. He’s stuck with the S159 wedges since graduating from the Korn Ferry Tour, as he feels confident in the head shape.
“I prefer the shape a little bit more of the leading edge, not as rounded of a leading edge, a little bit more straight on,” Shipley added.
The added confidence helps him with adapting to the different grinds needed week-in-week-out on Tour. Shipley is happy to game three different grinds with his lob-wedge.
“Primarily use the T, the H, and then I’ll do a 58S,” Shipley said. “These are actually at 59 degrees. I’ll do the 58 strengthen to take a little bit of bounce off in the S grind and then we’ll shave some trail edge and heel edge relief. Just helps act as like a higher bounce essentially. So kind of stick with those most of the time.”
Heavier the better
The final piece to Shipley’s puzzle is his custom Ping PLD Anser 4D. It’s somewhat of a gentle giant, featuring a heavier-than-usual head, but a custom aluminium insert.
“It’s a little bit heavier, I think this one’s 355 to 360 grams, so a little bit heavier head,” Shipley said. “So the heavier head I feel like has helped me on some of the shorter putts with a little bit of stability.
“But the insert, I think, has been helpful in some of the longer putts. Just kind of slowing the ball down with the softer insert in the grooves.”

Shipley’s one of the few players left on Tour playing an actual Anser blade, having said in the past that he naturally sets up to the right on putts and allows the face to rotate through. Something which he hasn’t been able to mimic with a mallet.
Shipley’s full bag:
Driver: Ping G440 LST (9 degrees @ 7.6)
Shaft: Fujikura Ventus TR Black 7X (45 inches, tipped 2 inches)
Mini driver: Ping prototype
Shaft: Fujikura Ventus TR Black 8X
3-wood: Titleist TSR3 (13.5 degrees, C2 SureFit setting)
Shaft: Fujikura Ventus Black 8X
5-wood: Ping G440 Max (19 degrees)
Shaft: Fujikura Ventus Black VeloCore+ 8X
Irons: Ping iDi (3 @ 19.25), Ping i240 (4), Ping Blueprint T (6-9)
Shafts: Fujikura Ventus Black HB 10X (3), True Temper Dynamic Gold 120 X100 (4-9 soft-stepped)
Wedges: Ping s159 (46-12S, 50-10S, 54-12S, 60 T or H @ 59)
Shafts: True Temper Dynamic Gold 120 X100 (46-50), True Temper Dynamic Gold Tour Issue S400 (54-60)
Putter: Ping PLD Anser 4D
Grips: Golf Pride ZGrip Cord
Golf Ball: Titleist Pro V1x Double Dot
Whats in the Bag
Hannah Green WITB 2026 (June)
Driver: Titleist GTS3 (10 degrees, D4 SureFit setting)
Shaft: Mitsubishi Chemical Diamana RB 53 S

3-wood: Titleist GT3 (15 degrees, D4 SureFit setting)
Shaft: Mitsubishi Chemical Diamana RB 63 S

7-wood: Titleist GT2 (21 degrees, C1 SureFit setting)
Shaft: Graphite Designs Tour AD DI-6 SR

Irons: Srixon ZXi5 (4), ZXi7 (5-PW)
Shafts: True Temper Steelfiber i80 CW

Wedges: Cleveland RTZ Tour Rack (50 MID-10, 56 MID-10, 60 LOW-06)
Shafts: Nippon N.S. Pro 980GH D.S.T. R

Putter: Scotty Cameron Xperimental 3.2 Prototype

Grips: Golf Pride Z-Grip Cord
Ball: Srixon Z-Star Diamond
Equipment
From the GolfWRX Classifieds: Tour Issue Ping G440 LST
At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, @Slinger24 is selling a tour-issued Ping G440 LST driver head. The item, verified by the club maker, has nine degrees of loft.

From the listing:
First up is a tour issue PING G440 LST 9 degree head. Head-cover included. Has been verified by PING with the serial number and you can see the spec sheet from PING as well. This thing is an absolute spin killer. I just can’t hit it high enough. Asking $380 shipped in the lower 48 UPS for the head.
To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules.
-
Equipment5 days agoMemorial Tournament Tour Report: Rory McIlroy, Cameron Young switch up drivers, and more
-
News1 week agoRussell Henley’s winning WITB: 2026 Charles Schwab Challenge
-
Whats in the Bag2 days agoJ.T. Poston’s winning WITB: 2026 Memorial Tournament
-
Equipment7 days agoDetails on Jason Day’s latest prototype Avoda iron setup
-
Equipment2 days agoBest irons 2026: Best irons overall, most forgiving irons, and more
-
Equipment3 weeks agoCJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
-
News2 weeks agoCharles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
-
Equipment2 weeks agoDetails on J.J. Spaun’s surprise putter switch



































AJ Jensen
Dec 2, 2013 at 12:29 pm
I have a silly question. If the new SLDR woods are cut through to the inside of the head, does that mean tiny rocks can get inside the head and rattle around? That would drive me effin’ crazy.
Kinesin
Oct 28, 2013 at 12:26 pm
If these perform as good as the driver I may have to get one of these too. Recently got the SLDR driver in 10.5 with the Speeder 57g stiff shaft. WOW! Long and straight. Even drives I didn’t think I’d hit very well get out there. I hit one low off the face on our par 5 18th and was amazed to see it had gone past 300 yards. I’d say I’ve gained at least 15 yards on my Nike VRS driver
Rich
Oct 27, 2013 at 10:50 am
TP will be back next year for TMade. New TP ball and TP forged blades out soon. RBZ stage 2 replacement also on the way. The SLDR woods look good but hang around for the new product……
jon
Oct 26, 2013 at 9:57 pm
Another failure…face is about all that’s going for it….insider info from a tm rep/pro…..waste
Chris
Oct 23, 2013 at 5:05 pm
Already reduced price at Dick’s
Socorr65
Oct 23, 2013 at 12:10 pm
Oh Boy!!!! More distance promised by TaylorMade.
Since I’ve upgraded to their latest, longest club faithfully for the last four years, I consistently drive 400 yards within 5 yards of the center of the fairway and hit my fairways 350 and hybids 300. I routinely shoot in the low 50’s since I never have more than a wedge to any par 4 or 5.
I CANNOT WAIT to add 15% more distance. Even if I get worse dispersion. I’ll be putting for more eagles and probably start shooting in the high 40’s.
When is the FTC going to put a stop to manufacturers’ BS claims?
Brian stamps
Oct 25, 2013 at 8:32 am
Yeah man I so want the SLDR 3 wood!
JL
Oct 22, 2013 at 9:26 pm
How are you supposed to get the dirt out from the inside, if the pocket is cut-through?
Kinesin
Oct 28, 2013 at 12:22 pm
Its filled with a polymer so no dirt can get in
Martin
Oct 21, 2013 at 7:23 pm
The shallow face looks a lot like an Titleist F2 wood. If its just as good and longer, I will buy it!! 🙂
Prairiegolf
Oct 21, 2013 at 6:13 pm
Looks nice. Shorter shafts and charcoal grey color should make the purists happy. As long as it performs great that is all that matters to me. I look forward to trying it out.
Lazza
Oct 21, 2013 at 3:22 pm
Major problem I have with the SLDR line of clubs (got the driver) is the rather soft nameplate. Got a ding on it within one round. At the local pro shop the nameplate was already coming off on the demo driver, so I can only imagine that it will come off in a hurry on the woods and hybrids.
ac12
Oct 23, 2013 at 12:00 am
Our Club has a demo driver… The screw that holds the sliding piece in place had the threads stripped the first day. Cheaply done
Mike French
Oct 21, 2013 at 1:17 pm
If you want SWAG get a Kick-X SRT hybrid.
DRAGO
Oct 21, 2013 at 1:16 pm
I hear they have higher bounce options coming out for DIGR and DRVR swings out there…..Rumor is for an extra $250 in an underground garage Vokey will come and custom grind a fairway wood or hybrid for your needs! HAHAHA
SWAG BAG
Oct 21, 2013 at 12:49 pm
The most important thing for me is lookin’ fresh on the course. I want a bag full o’ swag. And, these T-Made SLDR’s aren’t fresh, and won’t help me look good. These are about the whackest clubs Ive seen TM make in a long minute.
Remember, TM, we want SWAG, not the WACKNESS.
CD
Oct 21, 2013 at 12:11 pm
Don’t bet on it. They’ll definitely have them marked down in time for Christmas shopping.
bl21
Oct 21, 2013 at 12:00 pm
Release date Nov. 15th….. half price by May 2014?
Matt
Oct 21, 2013 at 11:21 am
Does it come with a toaster oven?
JL
Oct 21, 2013 at 11:15 am
SLDR is just a name, doesn’t mean there are sliders on the woods. Guess it’s just replacing the RBZs. Wonder what the R1 replacement will look like.
steve
Oct 22, 2013 at 9:58 am
sldr is the new r1. rbz 2 was just released. the tour versions should be available later this year.
steve
Oct 21, 2013 at 9:51 am
where is the sldr weight aspect?
Keith
Oct 21, 2013 at 8:36 am
Kinda funny they say the increased ball speed more than makes up for lower MOI i.e. forgiveness. So your ball will fly farther offline on a miss hit. Hmmmm. That’s better than shorter and in play? Guess I don’t follow that “logic”.
Keith
Oct 21, 2013 at 9:47 am
On the other hand, it may not be that far off line. Gotta try it.
John
Oct 21, 2013 at 3:35 pm
Lol I thought the same thing. “Instead if missing the fairway by a few yards, you can now miss DEEP into the woods!”
Pretty sure a low MOI head that helps by hitting it further offline is why every golfer needs.
BUT! It creates higher launch and lower spin and gives extra yards, so it has to be good.
NG
Oct 22, 2013 at 12:32 am
I think you are all confused between MOI and forgiveness…MOI is so 2000 anyway!
Sparky
Oct 21, 2013 at 5:31 am
When will ladies clubs be available in SA?
Justin
Oct 21, 2013 at 2:02 am
Any word on whether or not Taylormade is going to continue its tradition of Tour and TP models? This one could be going in the bag..
Slaz
Oct 21, 2013 at 12:37 pm
Yes they have TP models for both. The TP version of the Fwy wood is $100 more that the standard version.
Tyler
Oct 26, 2013 at 4:28 pm
Do you know what the difference is between the regular and TP model is?
Kinesin
Oct 28, 2013 at 12:19 pm
The TP is has exactly the same head. 460cc. The only difference is the stock shaft is comes with. The SLDR comes with a Fujikura Speeder 57g shaft while the TP comes with a Fujikura Motore Speeder 63g shaft. So its just a shaft upgrade
Kinesin
Oct 28, 2013 at 12:20 pm
Thats for the driver by the way, not the fairway woods
Kyle
Oct 21, 2013 at 12:31 am
Date of release?
Kyle
Oct 21, 2013 at 12:32 am
Wow read the whole article and missed that it already said November 15. Oops