Equipment

The future of iron shafts is graphite

Published

4 years ago

Aug 15, 2020

For me, the process to accept the superiority of graphite has not been easy. Like many GolfWRX readers, I grew up with a clear goal—become an elite player. A rite of passage on this journey, was when you finally had enough speed to get True Temper Dynamic Gold X100 shafts in your blade irons.

I remember the day well. I also remember not having much difference in performance after making the change. Instead, the only real difference I experience was a lack of feel (which many describe as “boardiness”).

I was a victim of a bogus narrative, but as I have gotten older, I have also gotten smarter. I have awoken to the truth in 2020: Steel is good, but graphite shafts are the future of golf, especially for irons for the average player.

Let me explain. To understand why graphite is becoming a superior option, you must understand two important inputs of the design and manufacturing of shafts. The first is taper and the second is the thickness of the walls of the shafts. Together these factors combine to influence everything we think we love about steel. However, they are also extremely fixed; you cannot do a lot with the material. That is simply not true for graphite. Instead, graphite gives shaft manufacturers options. Options can result in way better performance for you.

So, what does this mean for you?

Let me share my own experience which started a couple of months ago when I learned that I would be moving from Florida to Denver. I was excited for the change of pace but quickly had questions—how would this impact my set makeup? With some questions in mind, I reached out to an old friend, Gawain Robertson of ACCRA (True Temper). I wanted to know how I could take advantage of the altitude and become the inner bomber I always knew I was!

With Gawain’s expertise, we developed a profile for the shaft that I wanted: something about 85 grams, 3.0 degrees of torque, and higher spin to go with a set of PXG 0211 iron heads. The intent was to create a combination, which was going to be easy to have max peak apex with lower spin, resulting more distance.

So, a set was built: 0211’s with custom ACCRA graphite shafts, 1/2 inch long, 2 degrees flat with Golf Pride New Decade MCC Grips.

As soon as I got to Denver, I was excited to test. I got a bucket, set up my FlightScope and started to smash 6-irons (Bugattis do not need to warm-up). The results? Over 15 shots my numbers where what I wanted, my smash stayed at an average of 1.39 but my peak apex went up from 28 to 33, my clubhead speed up from 86 to 89 mph, but my spin was about the same, hovering around 6,000 RPM, or in plain language 200-yard high, long 6-irons.

Graphite shaft technology is only going to improve, and we are, to use a ball flight term, far from the apex. I believe the future of iron shafts, in general, will be graphite—I know that, in my particular case, I’ll never see the glimmer of steel when I stand over an iron shot again.

Your Reaction?

LIKE491
LEGIT60
WOW31
LOL32
IDHT14
FLOP22
OB8
SHANK149

Related Topics:

Up Next

L.A.B. Golf now offers DF 2.1 putter with Electroless Nickel finish

Don't Miss

TaylorMade P Series irons: Talking tour integration

Brendan Ryan

Brendan Ryan, an entrepreneur and scientist, is a passionate golfer who loves his local muni. Armed with a keen interest in the game, a large network of friends in the industry, Brendan works to find and produce unique content for GolfWRX.

25 Comments

Speedy

Sep 14, 2020 at 11:39 am

Niche. Makes sense for a few amateur cases (seniors, ladies, injuries, etc.). Most need steel.

I’d prefer hickory to graphite for irons, but that ain’t gonna happen. Steel rules.

Reply Report comment
- John
  
  Nov 2, 2020 at 12:29 pm
  
  This has to be one of the most ignorant, clueles and un-informed comments iver ever read on the subject of shafts. Im guessing you are a high handicapper with a scratch mouth.
  
  Rubbish.
  
  Reply Report comment
- Gerry Teigrob
  
  Apr 5, 2021 at 12:03 am
  
  I don’t need steel. I need confidence in my game. Steel doesn’t do that for me!
  
  Reply Report comment
Craig

Aug 18, 2020 at 3:25 pm

I like the thought of graphite shafts in the irons, I always run into issues with the wedges, either the exact shaft isn’t an option, or the steel options are too light.

Reply Report comment
Matt Brown

Aug 17, 2020 at 4:54 pm

With having wrist surgery, I just switched to graphite shafts for irons and wedges, to give my joints a break. I don’t know why anyone wouldn’t put these in play. Golf is bad enough on the body, might as well take any advantage you can.

Reply Report comment
ht

Aug 17, 2020 at 4:26 pm

For a guy with 110-115 mph driver swing (think it’s like 90-94 mph with a 6-7 iron) that wants to tinker, what would someone recommend? Need x-100 specs. Low low

Reply Report comment
- BT
  
  Aug 19, 2020 at 12:57 pm
  
  Recoil Proto 125 F5 OR Steelfiber i125CW S or X.
  
  Reply Report comment
- Jesse
  
  Aug 25, 2020 at 11:20 am
  
  I recently switched to graphite (Fuji Pro 115 TS) after back surgery and couldn’t be happier, once you get over the ego issue (which you will have) they are superior to steel in every way.
  
  Reply Report comment
- geohogan
  
  Aug 25, 2020 at 2:58 pm
  
  Nunchuk Xi, 100 gram shaft, with stiffest tip possible.
  
  Reply Report comment
Bob Pegram

Aug 17, 2020 at 3:23 pm

The specs of graphite shafts can vary a lot more than the specs of steel shafts – bend point, weight distribution, amount of torque, total weight, etc. That is intentional. That makes using a good club fitter with FlightScope, Trackman, etc. more important. I used Dynalite Gold X-100 shafts on blades for a long time. They worked great, but somebody stole my clubs. I eventually found the same heads on Ebay, but they had Dynamic Gold S400 shafts – too heavy. My distances shrank. I switched to X-flex graphite shafts and got my distances back. They also mute the shock of impact. I now use longer length irons (+1.5 inches) with forged cavity back heads. Without graphite they would be way too heavy. They work great. The longer lengths take the stress off my old inflexible back. I hit the ball the same distances I did with the Dynalite shafts 20 years ago.

Reply Report comment
Trevino

Aug 16, 2020 at 5:09 pm

The future of golf is $65 a shaft.

Reply Report comment
- Ben Hogan
  
  Aug 17, 2020 at 10:29 am
  
  And $400 putter shafts
  
  Reply Report comment
Sam

Aug 16, 2020 at 4:24 pm

Then why don’t the pros use graphite shafts in their irons.

This is the beauty of golf. What works for one won’t work for everyone else.
I’ve tried my dad’s graphite shafted irons and just nope.
Steel for me untill I’m older probably. Each to their own.
Also, 200 yard 6 iron, that sounds like taking the fun pit of golf.

Reply Report comment
- Reid Thompson
  
  Aug 17, 2020 at 8:46 am
  
  Re : Pros – Its going to take some some time for generatiosn to grow up with it. If a guy has 30 years of success with an x100, there is a mental component too. Its very expensive to put a graphite shaft set in a kid’s set.
  
  Dads Graphite – These are potentially not your dad’s graphite. The progress made in just the last couple years is insane. The strength to weight ratio and consistency of graphite vs steel is a joke. There’s no comparison and graphite allows you to put weight where you want it. For a price.
  
  Reply Report comment
- Bob Pegram
  
  Aug 17, 2020 at 3:27 pm
  
  A few touring pros do use graphite shafts in their irons – Brandt Snedeker, Matt Kuchar, sometimes others.
  
  Reply Report comment
  - Eric
    
    Aug 19, 2020 at 8:41 am
    
    Abraham Ancer
    
    Reply Report comment
- MIKE
  
  Sep 4, 2020 at 11:24 am
  
  Look at some of the pro’s longer (& driving) irons, more are graphite than you think. Every hybrid I’ve seen on the PGA/LPGA & Champions tour is graphite. The quality of graphite shafts has changed dramatically over the past decade. I never thought I’d go graphite but except for my SW & LW, I’m all in now.
  
  Reply Report comment
- Gerry Teigrob
  
  Apr 5, 2021 at 12:06 am
  
  Actually Rickie Fowler, Bryson deChambleau, Matt Kuchar among others play graphite shafts. Checked what’s in their golf bag lately?
  
  Reply Report comment
JRube

Aug 16, 2020 at 9:25 am

You’re also hitting a ball in the mile high air of Denver versus Florida….

Reply Report comment
- Matt
  
  Aug 16, 2020 at 2:47 pm
  
  Next article “low density air is the future of golf”
  
  Reply Report comment
Stay puft

Aug 16, 2020 at 5:07 am

So why have we always seen graphite costing so much more? This isn’t new. This conversation is at least 30 years old! One question mark I’d have and maybe this is more relevant to a better player is weight. I’d have thought steel shafts can get to a heavier weight without as much engineering naturally. So for players that need a stiffer and heavier shaft, perhaps this is why steel is still in use after this talk track for the last 20-30 years.it doesn’t need thick walls to get to weight and what’s the impact of having thicker walls in shafts for an iron? What differences do you feel or see in performance. Graphite in irons hasn’t caught on for a reason. It’s likely down to more than a single factor like cost or weight, torque or feel. Whatever it is, I don’t see it happening anytime soon.

Reply Report comment
- geohogan
  
  Aug 25, 2020 at 6:02 pm
  
  A heavier (100 gram), stiffer graphite shaft is found in Nunchuk for woods and irons.
  The butt is made stiffer with thicker wall, which also counter balances the shaft
  just as hickory shafts were naturally counterbalanced.
  
  Reply Report comment
RGoulart

Aug 15, 2020 at 2:49 pm

From a technology standpoint I can see how graphite is, even now, better than steel. OEMs are able to achieve with much higher accuracy the profile a player needs. However, cost is “steel” a major factor when making a purchase. I am sure OEMs will figure out a way to make them cheaper in the long term, but at the moment I cannot see it being adopted by the average golfer.

Reply Report comment
- Bib
  
  Aug 15, 2020 at 9:47 pm
  
  A graphite shaft costs a manufacturer like 6 bucks to make .steel is something like a dollar. How much cheaper does it need to be?
  
  Reply Report comment
- Mike
  
  Aug 16, 2020 at 10:10 pm
  
  Not sure if I’m getting the gist of the comment, but in the last two iron sets I purchased, graphite OEM stock shafts were $10 more each. I bought six irons both times, That’s 60 bucks more each purchase. That $60 was irrelevant to me in terms of buying a new set of irons
  
  Reply Report comment

Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

A shocking Backstryke putter appearance + 7 interesting gear photos from the Zurich Classic

Published

14 hours ago

Apr 25, 2024

Andrew Tursky

Welcome to New Orleans, where TPC Louisiana plays host to the 2024 Zurich Classic. In between breakfast beignets and nightly Creole feasts, PGA Tour players are also competing in the unique two-man format at the Zurich this week.

Although the vibes in Nawlins are a bit lighter-fare than the recent back-to-back competitions the Masters and the RBC Heritage signature event), the gear news was no less serious this week.

We spotted some recent changes from Rory McIlroy, a very rare Odyssey Backstryke putter, dove into the bag of legendary New Orleans Saints quarterback Drew Brees, and spotted Patrick Cantlay continuing to test new equipment.

Get your beads out and crack your crawfish, because it’s time for an equipment rundown from The Big Easy (meaning New Orleans, of course, not Ernie Els).

See all of our photos from the Zurich Classic here

Rory’s on-and-off lob wedge

Since the end of 2023, Rory McIlroy has had an on-again, off-again relationship with a Titleist Vokey K-Grind lob wedge. In his last start, it was on, and the wedge is back in the bag again this week. We got a great look at the complicated grind that McIlroy uses.

View this post on Instagram

A post shared by GolfWRX (@golfwrx)

A full look into McIlroy’s bag above also shows that he switched out of the TaylorMade BRNR Mini Copper that he used at the RBC Heritage, and he’s back into the Qi10 core 3-wood. As we discussed last week, McIlroy will likely keep the BRNR around as a course-specific club, trading it in and out for the 3-wood.

See Rory McIlroy’s full 2024 WITB from the Zurich here

Turning Back the clock

Unless Tommy Gainey is in the field, it’s unlikely you’ll ever see Odyssey’s Backstryke technology make an appearance on the PGA Tour.

But then, when you least expect it, Russ Cochran shows up.

For more than a decade – since the 2013 Sony Open in Hawai’i – Cochran has been stuck on 599 PGA Tour starts. This week will be his 600th.

Cochran is in the field at the Zurich this week playing alongside Eric Cole, whose regular caddie is Reed Cochran, Russ’s son.

The Backstryke putter was first released back in 2010, and its unique design helps shift the axis point of the putter closer to the CG of the head. And, the putter is getting a nod this week at the Zurich Classic, thanks to Cochran’s 600th career PGA Tour start.

The putter is certainly awesome, but don’t forget to check out Cochran’s full WITB from this week.

Drew Brees with a Super Bowl winning Scotty Cameron putter

Drew Brees, a legendary retired quarterback for the hometown New Orleans Saints, made an appearance at the Zurich’s Wednesday Pro-Am, playing alongside Zach Johnson, Ryan Palmer, and current Saints QB Derek Carr.

Brees’ bag included a TaylorMade Stealth2 Plus driver, a BRNR Mini 13.5-degree, a Stealth 5-wood, a mixed set of P-790 and P-760 irons, Milled Grind Hi-Toe wedges, and a custom Scotty Cameron “New Orleans Saints” putter, which Scotty made for Brees following his Super Bowl MVP-winning performance in 2010.

View this post on Instagram

A post shared by GolfWRX (@golfwrx)

It should also be noted that Brees has his Venmo QR code as a bag tag.

If you’re gambling with Brees on the course, just know that not having cash won’t work as an excuse.

Brilliant.

See Drew Brees’ full WITB from the Zurich here

Stricker’s unrecognizable putter

Steve Stricker has made numerous upgrades to his bag recently, including a new TSR3 driver and T100 irons, but his longtime Odyssey White Hot No. 2 putter is still going strong. It’s the most recognizable unrecognizable putter ever.

Here’s a better look at Stricker’s flatstick, which he started using back in 2007.

View this post on Instagram

A post shared by GolfWRX (@golfwrx)

Patrick Cantlay has opened the equipment-switching floodgates

Over on the PGA Tour’s Equipment Report this week, we covered Cantlay’s recent switch into Ping Blueprint S irons, and a Titleist TSR2 driver.

Cantlay hadn’t switched irons for about seven years, so the iron switch he made at The 2024 Masters came as a shock to the norm. He simply isn’t one to change gear very often, so anytime Cantlay makes a switch, it’s news.

It seems the floodgates of equipment testing have opened up a bit for Cantlay, who was also spotted testing a custom Scotty Cameron blade putter on Tuesday this week. By Wednesday, Cantlay was back practicing with his familiar Scotty Cameron T5 Proto mallet, but it’s certainly something to keep an eye on going forward.

Daniel Berger’s custom Jailbird site lines

Berger, who’s currently using Odyssey’s Ai-One Mini Jailbird mallet putter, has a unique 3-dot, 2-line alignment on the crown of his navy-white-navy-white mallet putter. Looking down at the putter, it’s easy to see why this alignment system would help; it just seems impossible to set up to the ball off-center, or misaligned to the target.

Also, for anyone worried, you can rest easy. Yes, he’s still playing the 2013 TaylorMade TP MC irons, which we highlighted in our recent “Modern Classics: Old vs. New” video testing series.

FitzMagic teams back up

Brothers Matthew and Alex Fitzpatrick are teaming up once again at the Zurich this year, and Bettinardi Golf hooked them up with some festive “FitzMagic” headcovers to match this week.

See what else is in Alex Fitzpatrick’s WITB here

And, with that, we say goodbye to the Zurich Classic in New Orleans. Don’t forget to check out all of our photos from this week, including 30 unique photo galleries full of equipment photos.

We’ll see you next week in Texas for the 2024 CJ Cup Byron Nelson!

Your Reaction?