Equipment
Don’t get AMP’d up. Rickie is just testing shafts, y’all
As you may have seen in our tour photos this week, Rickie Fowler has a new/old set of irons in the bag. Specifically, Fowler is gaming a set from 2013: the Cobra AMP Cell Pro.
But WHY?! Didn’t we just hear all the buzz about his self-designed Rev33? Well yes, we did.
Although the rumors and conspiracy theories may run wild, in this case, it’s a nothing burger.
He’s testing shafts folks, Dynamic Gold Tour Issue X100, specifically, to get ready for major season.
DETROIT, MICHIGAN – JULY 02: A detail of the bag and clubs of Rickie Fowler of the United States during the first round of the Rocket Mortgage Classic on July 02, 2020 at the Detroit Golf Club in Detroit, Michigan. (Photo by Gregory Shamus/Getty Images)
But why didn’t he put them in the Rev33?
That’s a simple one as well: time and economics. Rather than pull apart his gamers or have a set chauffeured in from Carlsbad, Fowler, who was messing around with the AMP’s at home and who doesn’t have Rev33’s with X1oo’s hanging on his wall, brought them to Detroit this week to test.
If all goes well, we can count on a set of Rev33’s with X100’s to be built at HQ. If not, no harm, no foul, and we go back to the Rev33 with his normal KBS C-Taper 125 S+ shafts.
If anything, I find the coolest thing here is Rickie’s instinct to not be wasteful. That’s a good thing right?
- LIKE97
- LEGIT15
- WOW6
- LOL3
- IDHT4
- FLOP6
- OB1
- SHANK29
Titleist has today introduced Pro V1, Pro V1x and Pro V1x Left Dash golf balls featuring enhanced alignment.
The new Enhanced Alignment aid is an extended alignment sidestamp designed for more precise aim and accuracy. The elongated sidestamp provides a built-in visual aid and measures over 65 percent longer than the standard Pro V1 sidestamp.
“Enhanced Alignment is designed for golfers who are seeking a more detailed, built-in alignment feature on their Pro V1, Pro V1x or Pro V1x Left Dash. We saw overwhelming interest in the single-colored line on Pro V1 Performance Alignment, and this is another alternative for players who prefer a slightly different look.” – Jeremy Stone, Vice President, Titleist Golf Ball Marketing
In addition to Enhanced Alignment, Titleist offers more than 40 different alignment aid designs on Pro V1’s fourth pole – opposite the sidestamp – through custom order on Titleist.com.
Pro V1, Pro V1x and Pro V1x Left Dash Enhanced Alignment golf balls are available to order through titleist.com and at authorized Titleist retailers beginning on May 17 in the United States only. Enhanced Alignment is available globally on July 1.
- LIKE4
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK1
Cobra released its first commercially available 3D-printed steel putter in 2020. Now, the company is bringing its first 3D-printed irons to retail with new LIMIT3D irons, which Cobra’s vice president of product architecture, Jose Miraflor, calls “the most significant technological advancement to happen to the category in the past 20 years” and “a look into the future of golf club design and performance.”
Cobra leveraged the expertise of computational design software firm nTop to create an ambitious design: a compact players blade that offers similar forgiveness as a larger, game-improvement style club and forged iron feel.
Speaking on the partnership, Mike Yagley, Vice President of Innovation & AI, Cobra Golf said, “nTop’s computational design tools integrated with 3D printing, also known as additive manufacturing, allowed us to create an incredible new design that looks and feels like a forged blade but performs like a larger, game-improvement iron. No one has done this before, and we’re excited to introduce these unique irons to the world.”
As Cobra explains, more forgiving irons are traditionally larger and sacrifice feel. Due to the limitations of casting and forging, creating a more compact, better-feeling iron that still delivers forgiveness was only possible with 3D printing. The resulting profile of Cobra’s LIMIT3D irons is smaller than Cobra’s King Tour irons.
LIMIT3D irons are 3D printed for 316L stainless steel with an internal lattice structure, which allowed engineers to position 33 percent of the iron’s overall weight to the exterior for greater MOI. 100 grams of tungsten is positioned in the heel and toe of each clubhead for low CG for ease of launch and high MOI for greater forgiveness.
Additionally, using nTop’s design software and additive manufacturing allowed for a substantially faster prototyping process, which enabled engineers to test more designs and mass placements for a superior finished product.
Cobra LIMIT3D irons: Pricing, specs, availability
- 350 individually numbered sets available in the U.S. and Canada (500 sets total worldwide)
- Available for custom order June 7
- Price: $3,000
- Set: 4-PW, RH only
- Full range of aftermarket shafts, grips
- LIKE10
- LEGIT4
- WOW9
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK6
Equipment
Coolest thing for sale in the GolfWRX Classifieds (5/14/24): Mizuno Pro 241 Azalea Edition irons
At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a set of Mizuno Pro 241 Azalea Edition irons.
From the seller: (@ayc25): “Brand new in box / plastic. 4-PW. Custom shaft bands, grips, ferrules. Dynamic Gold S200 Tour Issue. NO TRADES. Ships next day UPS Ground from Northern Virginia. $1695 shipped or best offer.”
To check out the full listing in our BST forum, head through the link: Mizuno Pro 241 Azalea Edition irons
This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules
- LIKE0
- LEGIT0
- WOW1
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Dave Portnoy places monstrous outright bet for the 2024 Masters
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
Two star names reportedly blanked Jon Rahm all week at the Masters
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
What we know about Bryson DeChambeau’s 3D-printed Avoda irons
Michael Block WITB 2024 (May)
Michael Block what’s in the bag accurate as of the PGA Championship. Driver: TaylorMade Qi10 “Dot” (9 degrees @7.5) Shaft:...
Brooks Koepka WITB 2024 (May)
Brooks Koepka what’s in the bag accurate as of the PGA Championship. Driver: TaylorMade Qi10 “Dot” (10.5 degrees @9.75) Shaft:...
Rory McIlroy’s winning WITB: 2024 Wells Fargo Championship
Driver: TaylorMade Qi10 (9 degrees @8.25) Buy here. Shaft: Fujikura Ventus Black 6 X 3-wood: TaylorMade Qi10 (15 degrees) Buy here. Shaft:...
Kevin Tway WITB 2024 (May)
Kevin Tway what’s in the bag accurate as of the Wells Fargo Championship. More photos from the event here. Driver:...
-
19th Hole3 weeks agoLET pro gives detailed financial breakdown of first week on tour…and the net result may shock you
-
19th Hole7 days agoReport: LIV star turns down PGA Championship invite due to ‘personal commitments’
-
19th Hole2 weeks agoGary Player claims this is what ‘completely ruined’ Tiger Woods’ career
-
Equipment6 days agoDetails on Justin Thomas’ driver switch at the Wells Fargo Championship
-
Whats in the Bag2 weeks agoTeam McIlowry (Rory McIlroy, Shane Lowry) winning WITBs: 2024 Zurich Classic
-
Whats in the Bag7 days agoKeegan Bradley WITB 2024 (May)
-
Equipment2 weeks agoGolf fans left surprised by LIV’s choice of course for its 2024 individual championship event
-
Equipment2 weeks agoWhy Wesley Bryan is playing two 4-irons this week
Tdawg
Jul 4, 2020 at 11:30 pm
Im just confused as to why dabble in a tournament??? All these guys have the best of the best in home sims with all the data and the best facilities to test equipment.
Shane
Jul 4, 2020 at 4:06 pm
I can see the testing of the shafts, but why at an event where you’re playing for a living instead of just testing at home? Thanks for the article!!
jmho
Jul 4, 2020 at 10:43 am
IF this is true, this seems stingy on behalf of Cobra. But I am gonna assume that he’s trying different irons altogether but they want to keep pushing the 33’s and it’s harder to do that when Rickie is playing something else.
Chip2win
Jul 3, 2020 at 7:38 pm
Uh…I hate to say it, but he’s not just testing shafts. After he hit a shot today on TV, you could clearly see he’s got the AMP Cells in the bag this week. They are pretty cool looking blades.
Mr C
Jul 4, 2020 at 11:19 am
Of course he’s using the Amp Cell Pro this week. It’s the entire point of this article. He using a set of Amp Cell Pro with X100 so he can test the X100 shafts as he doesn’t want to pull the shafts from him current gamers and replace them with the X100.
gwelfgulfer
Jul 4, 2020 at 8:11 pm
Although its a bit of a weak argument. If the ‘gamers’ were working so well, why not just use them. It takes them nothing to build/rebuild a set of irons.
Brandon
Jul 3, 2020 at 9:38 am
Might want to stick with the amps as he actually played well for the first time in a while yesterday.
Mr. C
Jul 4, 2020 at 11:21 am
The Amp Cell Pro are the best blades Cobra has ever produced in my opinion. I’m not surprised he played well with them.
Jack
Jul 2, 2020 at 11:43 pm
This story is so shallow and lacking in research ! Waste of space..
John Wunder
Jul 3, 2020 at 12:18 am
How exactly? The point to the story is there is to inform that 1) He’s just testing shafts 2) This was the easiest way to do it 3) He isn’t planning on switching out of his Rev33’s . Lacking in what research? It’s straight from the person who builds his clubs.
matt
Jul 2, 2020 at 11:12 pm
makes absolutely no sense… what does he learn from testing a shaft in a completely different head? I mean sure he might love this combo – but doesn’t mean squat for the performance in different iron. I think the rev is done – that club is ugly as sin and I think Rickie is coming to grips with his ill-conceived thoughts for that club.
John Wunder
Jul 3, 2020 at 12:25 am
Makes sense to him and the people that work with him. Unless I’ve been talking to a Cobra Tour Truck Catfish that is obsessed with golf club cover ups and conspiracies . That would actually be a fun reality show. Anyway thanks for reading;)
Nack Jicklaus
Jul 3, 2020 at 1:48 am
I’d watch Tour Truck Catfishing the reality show.
John Wunder
Jul 3, 2020 at 7:11 am
Right!!?? So would I
Brandon
Jul 3, 2020 at 9:41 am
Did you happen to ask the tour truck guy why Rickie prefers the F9 to the SZ? He seemed to take the SZ out of the bag really quickly at the beginning of the season.
Geo P
Jul 3, 2020 at 12:32 pm
Cool story, John! All these clowns saying negative stuff are just keyboard warriors that can’t break 100…..so their useless drivel means nothing! Keep up the great work ????
matt
Jul 3, 2020 at 8:27 am
love your content Johnny… I don’t doubt that’s what you were told. honestly I’m an iron shafts nerd – i think its a good story unto itself. Wonder what Rickie is after with the switch? He had that cup of coffee with S400s last year and got back into the the C-tapers. My guess is its a stats thing – probably sees how great his driving and putting is and thinks maybe the irons aren’t quite right somehow.