Connect with us

Equipment

Honma launches new XP-1 Series driver, fairway woods, and hybrids for 2020

Published

on

new 2020 Honma Driver

For 2020, Honma Golf is launching the all-new XP-1 line of clubs comprised of an entire family holistically designed to help players maximize forgiveness and get the most out of their games with one set. The new Honma XP-1 drivers, fairway woods, and hybrids, all the way to irons, is a new direction for the premium Japanese company that brings together ultimate craftsmanship with performance.

The highlight of the XP-1 line from Honma is the fact that they were designed from top to bottom to work as a comprehensive set of tool to achieve maximum performance. The technology in the metal woods flows from the driver to the hybrids with a seamless transition that creates consistency for feel and looks for the player.

Honma XP-1 driver

new 2020 Honma Driver

New 2020 Honma Golf Driver

Honma is known for its dedication to quality and craftsmanship, and every part of the XP-1 line was developed with the golfer in mind to both look appealing and perform to the highest standards. The XP-1 driver packs a lot of technology into a very classic looking club, and we’re here to take you under the hood—or in this case, the carbon fiber crown—to show you how it can help you hit better shots.

2020 Honma XP1 Driver toe

Honma XP-1 Driver Toe

It starts with a tour-inspired look from address, designed to inspire confidence for any level of golfer. Underneath ther gloss black crown, there is a lot of technology to generate faster ball speeds around the entire face and help get you dialed into the right setting. Speaking to the crown, it’s made from ET-40 fiber, making it one the lightest in golf. This weight savings helps engineers relocate an additional 15g of mass around the head towards the heel for increased MOI and greater ability to help players close the club face more easily.

Flip the driver upside down, and we have a lot more going on with the sole than initially meets the eye. Honma is introducing a new double slot in the sole for increased ball speed across a much larger area of the face. What starts off smaller in the middle increases in width and depth as it reaches towards the heel and the toe of the club. These slots, along with improved MOI, keep ball speeds up and misses closer to the intended target. The last part of the equation: How these wider parts of the face, flex around the more narrow middle to also increase gear effect—think of it like one more way to help the bigger misses stay in play.

New 2020 Honma Driver XP1

2020 Honma XP-1 Driver sole and shaft adjustment connection

The last piece key piece of technology in the XP-1 driver head is exclusive to Honma—the adjustable hosel that changes face angle, lie, and loft, but never changes the orientation of the shaft. This gives the player or fitter the ability to truly dial in hosel settings without having to worry about the constantly changing of the grip orientation. This, according to Honma, also keeps the shaft spine in the ideal location for consistent performance.

Honma 2020 xp1 driver shaft

Honmq Vizard 43g shaft

Honma is the only manufacturer that produces its own shafts from start to finish in house, and the XP-1 is getting its own custom-designed and built shafts to complement the technology built into the heads. The Vizard stock shafts are engineered to produce a smooth feel that promotes faster clubhead speeds, yet also remain extremely stable. For the XP-1 driver, the matching Vizard shafts will come in weights of 43g, 53g, and 63g, and flexes from senior to stiff.

Honma XP-1 fairway woods

The XP-1 woods bring the same level of craftsmanship and technology as the drivers to a club designed for use both off the tee and off the fairway.

New for 2020 Honma XP-1 Fairway wood

New for 2020 Honma XP-1 Fairway wood

The Honma XP-1 3-wood uses the same weight-saving ET-40 crown to position a large amount of the club’s total mass low and on the sole for greatest possible launch and spin consistency. The 3-wood is the second-lightest club in most players bags by total weight and head mass, and unless you are carrying a second driver, it’s also the second-largest by volume. By using the carbon crown designers get everything they can from the other technologies including the double slot sole and thin fast face without having to sacrifice the overall design of not just the head but the entire club.

New Honma XP-1 3 wood crown fairway

Honma XP-1 3 wood crown

The XP-1 fairways also include a 5  7-woods, but with the smaller volume of the heads and the reduced crown size, using a carbon crown would actually increase the mass higher in the head, so they instead utilize an extremely thin high strength steel crown.

New Honma 53g Vizard Fairway Shaft XP1

Honma 53g Vizard Fairway Shaft

All of the fairway woods come with the same made-in-Sakata, Japan 43g, 53g, and 63g Vizard shaft options as the driver to help every player get the most of each club in the set. If might seem like a minor detail, but being able to design an entire club in house from head to grip is a big advantage for Honma versus other OEMs. This holistic approach to designing an entire club/set is a big benefit to the consumer looking to get the most out of each club in their bag and not feel like something may be working against them.

Honma XP-1 hybrid

With the Honma XP-1 hybrid, forgiveness and flow from the fairway woods is the number one consideration for these club. The flow includes a wood-like shape that keeps the club shallow and the center of gravity as low as possible for higher launch and approach shots that fly higher and land softer. Considering the target player for the XP-1 line, the wood-like shape is also very confidence-inspiring.

New 2020 Honma XP1 hybrid

Honma XP-1 Hybrid

Honma continues the design philosophy of keeping the XP-1 both forgiving and fast by utilizing the double slot sole all the way into these hybrids that go from a 19-degree 3-iron replacement to a 25-degree 5-iron replacement.

Honma XP-1 specs & availability

The Honma XP-1 driver, fairway wood, and hybrids will be available starting in October.

New 2020 Honma XP1 Driver fairway hybrid specs

Honma XP-1 line club specs

Your Reaction?
  • 94
  • LEGIT15
  • WOW6
  • LOL2
  • IDHT2
  • FLOP2
  • OB2
  • SHANK12

Ryan Barath is a club-fitter & master club builder with more than 17 years of experience working with golfers of all skill levels, including PGA Tour players. He is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop and is a member of advisory panels to a select number of golf equipment manufacturers. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, and share his passion for club building, course architecture and wedge grinding.

9 Comments

9 Comments

  1. Doug

    Sep 22, 2019 at 10:42 am

    What is USA release date

  2. JP

    Sep 19, 2019 at 7:41 pm

    $599?!? Are they crazy? No thanks.
    .
    Drivers are getting out of control with prices. All of golf is getting out of control $$$!!!

  3. 15th Club

    Sep 19, 2019 at 3:53 pm

    That is what golf clubs should look like at address. I realize that TaylorMade and others are doing things with clubhead paint and graphics that make their clubs easier to recognize on tv in the hands of Tour players. But that doesn’t help me one bit. I’d rather play with a club that looks like a golf club; all other things being equal.

    My current driver is a TaylorMade M2. It’s a good driver, of course. I’d prefer that it looked like this Honma.

    So where — say in the area of Miles of Golf and Carl’s Golfland — can a guy demo these new Honmas?

  4. Curt

    Sep 19, 2019 at 12:45 pm

    What’s the point of patents?

  5. Paul

    Sep 19, 2019 at 9:21 am

    Wow, a slot in the sole. That’s genius, I don’t know why a company hasn’t done that before…

  6. BoomDaBoom

    Sep 19, 2019 at 7:48 am

    Gotta admit that driver sole kinda looks dope as funk. Jusr a clean look. Wonder what it looks like from the top. Might actually look into these and eventually buy one… probably in a couple years when they are much cheeper.

  7. Flow

    Sep 19, 2019 at 2:25 am

    The shafts obviously can’t compete with the Beres series but still better than anything else on the market in this price category. In my opinion thats excellent value for your money and there are not many clubs out there with shafts this light and soft that still show decent torque values.

    • Thomas A

      Sep 19, 2019 at 9:23 am

      “Obviously???”

      • Ugudor

        Sep 24, 2019 at 3:46 pm

        You pay 3k+ for a set of Beres, do you think the shaft is the same quality as in a 1k XP1 set?

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Kevin Tway WITB 2024 (May)

Published

on

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Stealth 2 (15 degrees)
Shaft: Mitsubishi Diamana D+ 80 TX

5-wood: TaylorMade Stealth 2 (18 degrees)
Shaft: Mitsubishi Diamana D+ 90 TX

Irons: Wilson Staff Utility (2), Titleist T100 (4-9)
Shafts: Mitsubishi MMT 100 TX (2), True Temper Dynamic Gold Tour Issue X100 (4-9)

Wedges: Titleist Vokey Design SM10 (48-10F @47, 52-12F @51, 56-14F), SM7 (60-10S)
Shafts: True Temper Dynamic Gold Tour Issue X100 (48-56), True Temper Dynamic Gold Tour Issue S400 (60)

Putter: Scotty Cameron T-5 Proto
Grip: Scotty Cameron Black Baby T

Grips: Golf Pride Tour Velvet Plus4

More photos of Kevin Tway’s WITB in the forums.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Did Rory McIlroy inspire Shane Lowry’s putter switch?

Published

on

Editor’s note: This is an excerpt from a piece our Andrew Tursky originally wrote for PGATour.com’s Equipment Report. Head over there for the full article.

The timing of Lowry’s putter changeup was curious: Was he just using a Spider putter because he was paired with McIlroy, who’s been using a Spider Tour X head throughout 2024? Was Lowry just being festive because it’s the Zurich Classic, and he wanted to match his teammate? Did McIlroy let Lowry try his putter, and he liked it so much he actually switched into it?

Well, as it turns out, McIlroy’s only influence was inspiring Lowry to make more putts.

When asked if McIlroy had an influence on the putter switch, Lowry had this to say: “No, it’s actually a different putter than what he uses. Maybe there was more pressure there because I needed to hole some more putts if we wanted to win,” he said with a laugh.

To Lowry’s point, McIlroy plays the Tour X model, whereas Lowry switched into the Tour Z model, which has a sleeker shape in comparison, and the two sole weights of the club are more towards the face.

Lowry’s Spider Tour Z has a white True Path Alignment channel on the crown of his putter, which is reminiscent of Lowry’s former 2-ball designs, thus helping to provide a comfort factor despite the departure from his norm. Instead of a double-bend hosel, which Lowry used in his 2-ball putters, his new Spider Tour Z is designed with a short slant neck.

“I’ve been struggling on the greens, and I just needed something with a fresh look,” Lowry told GolfWRX.com on Wednesday at the 2024 Wells Fargo Championship. “It has a different neck on it, as well, so it moves a bit differently, but it’s similar. It has a white line on the back of it [like my 2-ball], and it’s a mallet style. So it’s not too drastic of a change.

“I just picked it up on the putting green and I liked the look of it, so I was like, ‘Let’s give it a go.’”

Read the rest of the piece over at PGATour.com.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Webb Simpson equipment Q&A: Titleist’s new 2-wood, 680 blade irons, and switching to a broomstick Jailbird

Published

on

With seven career wins on the PGA Tour, including a U.S. Open victory, Webb Simpson is a certified veteran on the course. But he’s also a certified veteran in the equipment world, too. He’s a gearhead who truly knows his stuff, and he’s even worked closely with Titleist on making his own custom 682.WS irons.

On Wednesday at the 2024 Wells Fargo Championship, I caught up with Simpson to hear about his experience with Titleist’s new prototype 2-wood, how Titleist’s 680 Forged irons from 2003 ended up back in his bag, and why he’s switching into an Odyssey Ai-One Jailbird Cruiser broomstick putter this week for the first time.

Click here to read our full story about Simpson’s putter switch on PGATOUR.com’s Equipment Report, or continue reading below for my full Q&A with Simpson at Quail Hollow Club on Wednesday.

See Webb Simpson’s full WITB from the 2024 Wells Fargo Championship here

GolfWRX: It seems like you’ve been a little all over the place with your irons in the past six months or so, and now going back to the 680’s. Is that just a comfort thing? What’s been going on with the irons?

Webb Simpson: Titleist has been so great at working with me, and R&D, on trying to get an iron that kind of modernizes the 680. And so the 682.WS took the T100 grooves, but kinda took the look and the bulk and the build of the 680’s into one club. They’re beautiful, and awesome looking. I just never hit them that well for a consistent period of time. It was probably me, but then I went to T100’s and loved them. I loved the spin, the trajectory, the yardage, but again, I never went on good runs. Going through the ground, I couldn’t feel the club as well as with the blade. So last week, I’m like, ‘Alright. I’m gonna go back more for…comfort, and see if I can get on a nice little run of ball striking.’

So that’s why I went back.

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

OK, that makes sense. I know you had done some 2-wood testing recently. Is that in the bag right now?

It’s like day-by-day. I used it at Hilton Head every day. Valero, I used it one round. And this week, me and my caddie will do the book every morning, and if it’s a day where we think we need it, we’ll just put it in and take the 3-wood out. I love it because it’s a super simple swap. Like, it doesn’t really change much.

Yeah, can you tell me about that club? I mean, we don’t really know anything about it yet. You know? I haven’t hit it or anything, obviously.

It has grooves like a 3-wood. Spin is perfect. And it’s honestly, like, everything is in the middle of a 3-wood and driver number. Trajectory, spin, carry, all of it. So, a Hilton Head golf course is almost too easy to talk about because, you know, there, so many holes are driver 3-wood.

Valero, our thinking was we had two par-5’s into the wind, and we knew that it would take two great shots to get there in two. So instead of hitting driver-driver, we just put it in. And I used it on those holes.

Hilton was a little easier because it was off-the-tee kind of questions. But Colonial will be a golf course where, you know, there’s a lot of driver or 3-woods. It’s kind of like a backup putter or driver for me now. I’ll bring it to every tournament.

So it’s, like, in your locker right now, probably?

Well, it would be. It’s in my house [because Webb lives near by Quail Hollow Club, and is a member at the course.] It’s in the garage.

Oh, yeah, that’s right. Do you know what holes you might use it out here if it goes in play? 

Potentially 15, depending on the wind. Second shot on 10. Could be 14 off the tee. The chances here are pretty low (that he’ll use the 2-wood). But, like, Greensboro would be an awesome club all day. I’m trying to think of any other golf courses.

There’s plenty that it’ll be a nice weapon to have.

It’s interesting, the wave of 2-woods and mini drivers. Like, it’s just really taken off on Tour, and all the companies have seemed to embrace it.

Yeah. The thing I had to learn, it took me, like, at least a week to learn about it is you gotta tee it up lower than you think. I kept teeing it up too high. You need it low, like barely higher than a 3-wood. And that was where I got optimal spin and carry. If you tee it up too high, you just don’t get as much spin and lose distance, I don’t know if that’s just a mini driver thing.

And you obviously have a Jailbird putter this week. What spurred that on?

Inconsistent putting. I’m stubborn in a lot of ways when it comes to my equipment, but I have to be open minded – I just hadn’t putted consistently well in a while. And I’m like, ‘Man, I feel my ball-striking coming along. Like I feel better; for real, better.’

If I can just get something in my hands that I’m consistent with. Being on Tour, you see it every year, guys get on little runs. I can put together four to five tournaments where I’m all the sudden back in the majors, or in the FedExCup Playoffs. You can turn things around quick out here. I’m like, ‘Man, whatever’s going to get me there, great.’

My caddie, David Cook, caddied for Akshay at the Houston Open and he putted beautifully. Then, I watched Akshay on TV at Valero, and he putted beautifully. And, I’m like, ‘I’m just going to try it.’

I’ve never tried it for more than a putt or two, and I just ordered what Akshay uses. It was pretty awkward at first, but the more I used it, the more I’m like, ‘Man, it’s pretty easy.’ And a buddy of mine who’s a rep out here, John Tyler Griffin, he helped me with some setup stuff. And he said at Hilton Head, he wasn’t putting well, then tried it, and now he makes everything. He was very confident. So I’m like, ‘Alright, I’ll try it.’”

And you’re going with it this week?

Hundred percent.

Alright, I love it. Thank you, I always love talking gear with you. Play well this week. 

Thanks, man.

See Webb Simpson’s full WITB from the 2024 Wells Fargo Championship here

Your Reaction?
  • 26
  • LEGIT3
  • WOW1
  • LOL2
  • IDHT0
  • FLOP0
  • OB0
  • SHANK2

Continue Reading

WITB

Facebook

Trending