Connect with us

Equipment

Forum Thread of the Day: “New Graphite Design Tour AD XC shafts”

Published

on

Today’s Forum Thread of the Day showcases new Tour AD XC shafts from Graphite Design. The shafts have been generating interest amongst our members, and commenting in our forums, Graphite Design disclosed the following information on their new additions

“The new 2020 Tour AD XC – “Xtra Carry” – wood shafts will be available at retail on Sept. 6, 2019. The Tour AD XC shaft profile is softer starting at the handle, stiff in the center section and has a stiff tip to promote low/mid launch angles and low-ball spin rates. The Tour AD XC also utilizes the brand new TORAYCA ® M40X carbon-fiber pre-preg in the Mid to Tip Section of the shaft as well as the TORAYCA ® T1100G carbon-fiber pre-preg with NANOALLOY ® technology in the tip section of the shaft for unrivaled shaft stability and precise ball control without the loss of the exceptional feel that Graphite Design shafts are so well known for.”

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • deep18: “This profile seems right up my alley. Looking forward to trying this one out.”
  • Richsgbox: “Cant wait to try it.”
  • easylittle5wood: “TX flex, nice.”

Entire Thread: “New Graphite Design Tour AD XC shafts”

Your Reaction?
  • 42
  • LEGIT5
  • WOW2
  • LOL3
  • IDHT0
  • FLOP4
  • OB1
  • SHANK3

Gianni is a freelance writer. He holds a Bachelor of Arts as well as a Diploma in Sports Journalism. He can be contacted at gmagliocco@outlook.com. Follow him on Twitter @giannimosquito

Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

New Fujikura Ventus Red and Fujikura Ventus Black shafts officially launched

Published

on

Fujikura Ventus Red, Fujikura Ventus Black

Fujikura has been on a roll in 2019 with the Ventus shaft series, including multiple wins on the PGA Tour. What started off as one shaft is now officially three profiles with the introduction on the Ventus Red and the Ventus Black shafts.

We speculated on these when they first arrived on tour for testing (WRX SPOTTED: Fujikura Ventus Black, WRX SPOTTED: Fujikura Ventus Red), and now we have all the official details.

fujikura ventus red, fujikura ventus black

Top to bottom: Fujikura Ventus Red, Fujikura Ventus Blue, Fujikura Ventus Black

Fujukira Ventus Red, Fujikura Ventus Black details

Just like with the original Blue, the new Ventus Red and Ventus Black profiles are designed to help tighten shot dispersion and maximize ball speed off the driver and fairway woods–especially on off-center shots. What makes the Ventus line unique is Fujikura’s VeloCore Technology, which was developed to boost the clubhead’s performance by maximizing energy transfer combined with an accelerated taper design that enhances the loading of the shaft and players feel.

“Like with ATMOS Tour Spec, we expanded the line of Ventus to provide players and fitters with three different profile options to really fine tune their performance numbers. As we know one size does not fit all with clothing or golf shafts, so we wanted to offer more than just one profile of Ventus. These days, players are looking to hit ultra-precise spin and launch numbers, sometimes within 100 rpm of their target. Having multiple profiles allows us to accomplish this.” Pat McCoy Director of Tour Operations.

The Ventus line extension is a direct result of tour players looking for the same stability and accuracy that they’ve experienced with Ventus Blue but in a launch/spin profile they require based on their swing characteristics. The Ventus Red is designed to achieve slightly higher launch and spin than the current profile of Ventus Blue—which can be both helpful in the driver and fairway woods.

On the other hand, the Ventus Black is an extremely stout profile designed for more aggressive players with a stiffer profile in the butt section and especially in the tip section compared to the original Ventus Blue profile. The color-coded shafts line up to similar launch characteristics of other Fujikura products including the Atmos line:

  • Ventus Red provides golfers with a mid-high launch option with mid-spin for more carry distance
  • Ventus Blue (Original) delivers a mid-launch with low spin
  • Ventus Black produces a low launch with low spin for golfers who need a more penetrating ball flight

Fujikura Ventus: What the manufacturer says

“Ventus has an entirely new and proprietary multi-material bias core construction that delivers ultimate stability through transition and impact called VeloCore. The multi-material core is comprised of ultra- high modulus Pitch 70 Ton Carbon Fiber and 40 Ton bias layers that are the full length of the shaft for incredible stability. In addition to VeloCore Technology, Ventus is engineered with an ultra-stiff tip section – to reduce twist and lower spin – and an accelerated taper butt section maximizes energy transfer through the swing – enhancing feel and shaft loading. The result is an extremely stable, high-performance shaft designed to empower your driver or fairway wood.”

The Ventus line is available in a wide variety of weights in flexes ranging from 57 grams to 86 grams and R2 up to X flex. The shafts retail for $350 MSRP and are available exclusively at authorized Fujikura Charter Dealers starting September 3,2019. 

Your Reaction?
  • 2
  • LEGIT1
  • WOW1
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Forum Thread of the Day: “Scotty Cameron Albertsons Boise Open putter covers”

Published

on

Today’s Forum Thread of the Day showcases Scotty Cameron’s Albertsons Boise Open putter covers. The vibrant french fries themed covers have been receiving plenty of love from our members in our forums, with one WRXer calling the new additions their “favorite headcover in a long time.”

Here are a few posts from the thread but make sure to check out the entire discussion and have your say on the covers at the link below.

  • jschwarb: “Gave up french fries many months ago … this cover makes me happy and sad. I’ll probably grab one for my T22 Fastback.”
  • manVSgolf: “This is my favorite headcover in a long time. Can’t wait to receive mine. Orders are still available for Club Cameron members.”
  • chrisokeefe12: “Those are so sick would love to get my hands on one of those.”

Entire Thread: “Scotty Cameron Albertsons Boise Open putter covers”

Your Reaction?
  • 11
  • LEGIT0
  • WOW1
  • LOL3
  • IDHT1
  • FLOP1
  • OB0
  • SHANK24

Continue Reading

Equipment

Top 10 most iconic driver and fairway wood shafts of all time

Published

on

fujikura golf shaft

If there is one thing we love as golf gear junkies, it’s driver (and fairway wood) shafts!

From the early years to today’s modern designs, materials, and profiles, there are some shafts that have maintained steady popularity—like a Ping Eye 2 lob wedge. There are a lot of graphite shafts that have stood the test of time, and they bring back memories of great driver combos gone by.

This is my top 10 list (in no particular order) of the most iconic driver shafts of all time.

Fujikura 757 Speeder

Fujikura golf shaft

Launched more than two decades ago, you could arguably say it’s the shaft that started the shaft craze. Built from advanced materials in a profile that was designed to work for stabilizing larger driver heads of the time—you know when 300cc was HUGE. The Speeder 757 was an instant hit among PGA Tour players, most notably Fred Couples, who used the shaft for over a decade and was said to have at one point remove all the remaining stock from one of the equipment vans for his personal use.

Aldila NV

Aldila NV Green golf shaft

One of the very first “low-spin monsters,” the Aldila NV took the PGA Tour and retail by storm when it was introduced. The unique green paint made it easily recognizable, and thanks to the many weights it was offered in, it was just as popular in fairway woods as it was in drivers. Honorable mention goes to its cousin the NVS (orange version) that was softer in profile and easier to launch. At a time when most off the rack drivers had three shaft options (low, medium, and high flight-promoting shafts), the NV was the staple as the low-launch option in many OEM offerings.

Mitsubishi Diamana Blue Board

Diamana Blue Board - Tiger shaft

Originally very hard to find, the Diamana Blue Board was a shaft that fit a large variety of golfers. Its name was derived from the blue oval that surrounded the “Diamana” on the all silver/ion painted shaft. Just like others on the list, the Blue Board came in a variety of weight options and was made particularly popular by Tiger Woods. Best known by most shaft junkies as being extremely smooth, it is one of the first sought after shafts in the aftermarket.

True Temper EI-70

True temper graphite EI70

It’s hard to picture a classic 900 series Titleist Driver without an EI-70 shaft in it. The EI-70 was lower torque—when that was a big talking point in shaft design—and it had a fairly stout profile, which in turn made it very stable. Unlike others on the list, it was much more subdued as far as its paint and graphics, but the green shaft was a mainstay for many years on tour and in the bags or recreational golfers.

Graphite Design Tour AD DI-6/7

Tour AD Di7 Tiger orange shaft

It’s hard to figure out if it was the design and performance of the shaft or the performance of a certain golfer (a certain Mr. Woods) that to this day makes the Tour AD DI-7 so popular. Painted BRIGHT orange with a bend profile that offered a lot of stability and playability for a variety of player types, it can still be spotted on tour every week. You could call the DI-7 the grandchild of the YS6/7, which should also get an honorable mention for its well documented smooth feel.

UST ProForce

UST golf shaft gold graphite

The aptly nicknamed “Lakers Shaft” because of its original gold and purple paint job, this was another shaft that was just as popular at the retail level as it was on the PGA Tour. As driver head sizes were going up (400cc ), players were looking for stability and this offered it. The most notable player to use it was Jim Furyk, who won the 2003 U.S. Open with one in the bag.

Grafalloy Blue

Blue graphite shaft stenson

Henrik Stenson and the Grafalloy Blue in his 3-wood. Name a more iconic duo…(I’ll wait). An updated and stiffer version of the Prolite, the Blue stood out for a couple reasons—its color, and its extremely low torque. Most golfers wouldn’t consider the Blue a very smooth feeling shaft, because it took a lot of speed and a quick tempo to maximize its performance, but it did birth another shaft for average player: the Prolaunch Blue, which is still available to this day.

Matrix Ozik TP7HD

1000 golf shaft Matrix

$1,100 bucks! That was the original asking price for the Martix Ozik TP7HD. Matrix thought of this design as a concept car of shafts and threw everything they had at it including exotic materials like Zylon, and the fact that it was wrapped on a 16-sided hexadecagon mandrel. Some golfers said it had a fluid-like feel (we golfers can sure be weirdly descriptive) but it still had a LOT of stability thanks to the materials. Although never as popular as many on the list, if you did spot one of these in the wild you knew its owner was VERY serious about golf gear.

True Temper Bi-Matrix

bimatrix Bubba golf shaft

Bi (two) matrix (a surrounding medium or structure). The first and only truly notable shaft to be made from putting two very different and distinct pieces together. The bottom portion of the shaft utilizes a steel tip section that serves to add stability and additional weight. This shaft is quirky, which is something that could also be said about Bubba Watson, who has used this shaft for over a decade now in MANY different Ping drivers (although Tiger did give it a go for a short period).

Accra SE-80

ryan palmer accra 5 wood shaft

This shaft might seem like the underdog of the bunch, but if you talk to any longtime club builder and get into “vintage” aftermarket shafts, undoubtedly the Accra SE-80 is going to come up at some point. Originally launched in 2006, the SE-80 combined a very low torque rating with an active tip section to help increase launch—yet feel extremely stable. Even though this shaft design is officially a teenager now, you can still find it in the bag of PGA Tour winner Ryan Palmer, who uses it in a TaylorMade R15 5-wood.

 

Editor’s Note: Let us know any shafts you think should be included in the comment section, WRXers!

Your Reaction?
  • 291
  • LEGIT19
  • WOW4
  • LOL3
  • IDHT3
  • FLOP6
  • OB5
  • SHANK22

Continue Reading

19th Hole

Facebook

Trending