Connect with us

Equipment

Bettinardi signs Eddie Pepperell

Published

on

Eddie Pepperell is a singular quantity in to world of golf, so it’s not surprising that the Englishman has taken a unique route to becoming a Bettinardi staffer.

20 months ago, the two-time European Tour winner walked into Core Golf in Thame, Oxfordshire, and bought four putters, including a Bettinardi Studio Stock No. 8.

Pepperell, who jumped from No. 513 to No. 38 in the OWGR since putting the Bettinardi in play in April 2017, won’t have to pay for his putters any more. He joins the likes Francesco Molinari, Haotong Li, and Matt Kuchar as a Bettinardi staffer, the company announced the today.

“I’ve tried a number of putters and time and again, it’s the one model I keep coming back to.” said Eddie. “Positively I won’t have to buy a Bettinardi putter again, but having bought four putters from Core Golf I’m just hoping I haven’t put them of business as a result!” he added.

It was after Pepperell’s British Masters triumph in October that negotiations to bring him on board began in earnest.

“Once Eddie stayed ahead of a strong field at the British Masters to win his second Tour title of the year with a Bettinardi putter, we decided to reopen negotiations and we’re delighted with the outcome. It means that we now have another top 50 player in the world playing Bettinardi putters…” said Executive Vice President, Sam Bettinardi.

Here are the specs for his Studio Stock No. 8, courtesy of Bettinardi, which also provided the photos below of Pepperell’s putter (pre rust).

Material: Mild Carbon Steel
Finish: Mercury Gray PVD Finish
Face Milling: F.I.T. Face
Weight: 358 grams
Length: 33.25”
Lie: 71 degrees
Loft: 3 degrees

A more recent (and rusted shot) below of Pepperell’s putter at The Open.

 

Your Reaction?
  • 44
  • LEGIT1
  • WOW0
  • LOL2
  • IDHT0
  • FLOP0
  • OB1
  • SHANK1

2 Comments

2 Comments

  1. ogo

    Dec 7, 2018 at 1:35 am

    Tour proven Bettinardi putter…. “Golfers are gullible.”, Harvey Penick – Little Red Book, page 84

  2. Oscar Stahle

    Dec 6, 2018 at 1:23 am

    Is is not RUST on the third picture showing the underside of the putter head – is is the PVD coating having been worn off from usage. Go Eddie !!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

WRX Spotted: A pair of custom putters

Published

on

This week’s Zurich Classic is all about pairs — that goes for the two-man teams competing for the winner’s check(s), and in the case of notable putters we spotted, a pair of new one-off customs in bags this week: Abraham Ancer’s personal Bettinardi and Danny Lee’s new Scotty Cameron Super Rat.

Let’s start with the Danny Lee’s because there is a LOT going on with that club including first and foremost – it’s one nasty wand:

  • Super Rat head shape with a single sight line
  • The milled (actual) loft appears to be pretty standard for Cameron Putters
  • The hosel has been bent to accommodate Danny’s “armlock” style. This keeps the loft of the head where it should be while forward pressing. This kind of adjustment would need to be made to any standard putter if you were to try the armlock, or else you would deliver negative loft at impact
  • The shaft is LA Golf Shaft OZIK TP — a shaft designed to remove undesirable vibration through the shaft, while also reducing putter head oscillation at impact. Not a surprise considering the number of multi material/graphite putter shafts that are available right now to help improve consistency.
  • Last but not least a SuperStroke Flatso grip installed with the flat part of the grip aligned parallel to the putter face! This isn’t the first time we’ve seen something like this, and it makes sense – Utilizing the orientation of the grip to create greater awareness of the face angle can help players of all skill levels create more consistent results, even tour pros.

Danny has had an interesting golf bag to follow this season with a number of changes coming almost weekly from irons to putters. Maybe this change could help turn his putting around (currently ranked 116th in strokes gained: putting), all while still being inside the top 50 in the FedEx Cup.

Now to Abraham Ancer’s new Bettinardi the Ancer Prototype.

  • This putter is based off of the BB1 style head with rounded bumpers and a plumbers neck
  • Compared to the BB1 though, the heel is thicker and it could have a slightly shorter blade length (TBD)
  • It has a recessed sight line on the top that runs perpendicular to the sight line in the flange to form a “T.” This is interesting for a couple of reasons including that it looks to be the width of a golf ball, which could help Abraham find the center better. Also as a right-handed golfer, this type of alignment is an indication that he is most likely right-eye dominant and uses the face of the putter to align to the target as much if not more than the flange line.
  • Just like Danny’s above, this putter is also shafted with the LA Golf Shaft OZIK TP — there must be something about that that has more players testing it out.
  • And finally, the grip is the SuperStroke Claw. Judging by the cleanliness of both these grips these are both new to the players and testing will prove what ends up come tournament time.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL1
  • IDHT0
  • FLOP1
  • OB1
  • SHANK1

Continue Reading

Equipment

Forum Thread of the Day: “Iron type for controlling shots into the wind?”

Published

on

Today’s Forum Thread of the Day comes from eckmanjp who is on the hunt for irons to help with controlling shots played into the wind. Our members give their opinions on what are the best options for eckmanjp, with plenty of different clubs and shafts recommended.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • driveandputtmachine: “Into the wind, spin is NOT your friend. No matter how low launching it will balloon. I was an extremely high spin player, in my search for something lower spinning my three best were…. TM P 790, Cobra Forged TEC, and Ping i500.The final piece is a shaft that spins high enough to hold greens, but not too high to balloon into the wind.”
  • mogc60: “Sounds like you have good clubs and shaft combo for reducing spin. Shafts do make a difference…but don’t cure the upshoot into the wind. Good advice above about more club and swinging slower…speed equals spin. I find the biggest mistake people make into the wind is playing the ball too far back and hitting down too hard. The key is smooth through impact and finishing low in your follow through…not pounding it down…that creates that upshooting shot that the wind destroys.”
  • dpb5031: “Technique plays the major role here, not equipment. Generally, anywhere from 1 to 3 extra club, grip down on the handle, and use what I call a wide-to-wide swing at 3/4 speed. Think limited arm swing (no longer than left arm parallel with the ground in BS) and then cover the ball, keep body turning through it, and finish wide & low, with handle following your rotating trunk around to the left.”
  • rxk9fan: “I think the head/shaft combo can make a huge difference of course along with how you deliver the clubhead into the ball. Take a look at the Titleist shaft chart and see what they are showing. FWIW though, the OP’s current shaft should not be a high launch/high spin shaft. I found both the 716 AP2 and CB to be tough to control spin with, but as suggested it was 100% my delivery at impact. I found the Srixon Z9xx series to spin less but the best thing I did was get to a quality teacher, and we improved a pretty tiny swing flaw that had a big impact on spin. Good luck. I can say I tried to “new club” my way through the spin problem, but three lessons is what it took to fix it.”

Entire Thread: “Iron type for controlling shots into the wind?”

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

Equipment

WRX Spotlight: Dead Zero Putting Disk Pro

Published

on

Product: Dead Zero Putting Disk Pro

Pitch: From Dead Zero: “The new Dead Zero Pro model putting disk offers golfers the ability to accurately determine green slope and a true fall line when practicing their “money” putts thanks to a bubble level embedded into the top of the disk. The bubble level accurately measures up to six-degrees of slope and gives a true reading of the fall line on any area of the putting surface. Like the Original model, the Dead Zero Pro helps all golfers build confidence to make more putts inside eight to ten feet.”

Our take on the Dead Zero Putting Disk Pro

The Dead Zero Pro Putting Disk Pro improves upon the original design by incorporating player and instructor feedback to include a level in the top of the disk. It’s a wise addition to a device that already offers players aid in an important practice approach: putting to a target smaller than the 4.25-inch cup. (The disk is roughly half the size)

We tried the Dead Zero Putting Disk Pro in the manner creator Eric Schmitt suggests in the video below.

We found it easier to focus on putting to a smaller target when using the device–the fact that the disk looks like a target certainly doesn’t hurt this! It’s also easier to practice breaking putts with the Dead Zero Putting Disk.

The level function helps quickly get an accurate feel for the putt, and you can set the disk down where the hole effectively “is,” from an aiming standpoint, on, say, an eight-footer that breaks six inches right to left.

It’s also a nice tool to have in your bag any time you need a target in practice, really, and are struggling to visualize a line or landing area. For example, when pitching from around the green.

Ultimately, this is a good practice and practice round tool that nicely functions as a smaller-than-a-golf-hole target for putting, a level, and an easy-to-see target.

A final word: There is something to the fact that golfers, particularly those who struggle with their putting, get hung up on aiming at a portion of the hole, “three balls out,” etc. If the cup has started to look more like foe than friend, shaking things up with a device like the Dead Zero Putting disk is recommended.

  • More photos of/discussion about the Dead Zero Putting Disk Pro in the forums. 
Your Reaction?
  • 12
  • LEGIT4
  • WOW4
  • LOL5
  • IDHT2
  • FLOP5
  • OB3
  • SHANK36

Continue Reading

19th Hole

Facebook

Trending