Equipment
The GolfWRX Shop (Ep. 9): Re-gripping a Ping Sigma 2 Putter
Ping’s new Sigma 2 putters are length-adjustable due to a uniquely designed grip. But what happens when you re-grip the putters? Equipment expert Brian Knudson finds out in this episode of The GolfWRX Shop below.
- LIKE54
- LEGIT7
- WOW5
- LOL11
- IDHT0
- FLOP4
- OB5
- SHANK42
Whats in the Bag
Alex Fitzpatrick WITB 2024 (April)
- Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X
Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX
Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)
Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X
Putter: Bettinardi SS16 Dass
Grips: Golf Pride MCC
Check out more in-hand photos of Alex Fitzpatrick’s clubs here.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss
In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
- driveandputtmachine: “Still playing a MIni 300. The head was only 208, so I ordered a heavier weight and play it at 3 wood length. I am playing a Ventus Red 70. I play 70 grams in my fairways. I use it mainly to hit draws off the tee. When I combine me, a driver, and trying to hit a draw it does not work out well most of the time. So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck. The 300 Mini is very good off the deck.”
- JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”
Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
Coolest thing for sale in the GolfWRX Classifieds (4/26/24): Artisan 0521 custom putter
At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for an Artisan 0521 custom putter
From the seller: (@Nobody2): “$775 -Artisan 0521 custom putter PVD (black finish) with sweep neck hosel. There are no personal stampings other than my player # in very small print on the side of the hosel (all Artisan products have this along with the date it was made). This putter looks absolutely amazing and has only been used for 3 rounds. It has a black steel shaft and has a very Cam Smith look to it. The putter looks new and has no wear marks anywhere on the putter. It comes with extra weights (one set of of 5 gram weights and one set of 15 gram weights). The head cover is a a navy blue ‘quilted blade putter cover.’ If you are wondering why I am selling…I flat out have the yips and the only thing saving me is a broomstick. New, this putter is $1085, so if the specs work for you (grip, length and lie can certainly be tweaked) it will save you some good money and 2 month wait time.
Specs:
To check out the full listing in our BST forum, head through the link: Artisan 0521 custom putter
This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules
- LIKE1
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
-
19th Hole2 weeks ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole4 days ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole2 weeks ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole4 days ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole1 week ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole2 weeks ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole1 week ago
Brandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
BIG STU
Nov 8, 2018 at 3:23 pm
You mentioned a counter balanced grip. I would have been curious to know what the adjustable mechanism weighed or if you could get it off to weigh it. And what was the weight difference between the Ping SS grip you took off versus the new one you put on? Far as you putting with it could you feel any difference in balance? Really I am just curious on the engineering side of things. Another question for you and not busting your chops in any way. Why do you not use air to put on grips? I think the air method would have worked on that grip too. BTW the comment will show up under my wife’s name because she has a Facebook account and I do not but this is Big Stu off of WRX asking
Joe Perez
Nov 7, 2018 at 4:15 pm
Excellent, Knuds!!! When I first saw the release of the Sigma 2s, I wondered if the grip could ever be changed at all.
Tim
Nov 7, 2018 at 3:11 pm
Nice video Knudson. I was just thinking about the regripping process of the exact putter! Is it just me or about half the comments on pretty much every single video either people complaining or acting like the safety police???
Nothing wrong with the way he cut off the grip…im sure hes done it a thousand times! He still has 10 fingers as far as i can tell! As far as it being square??? Who cares? It was a demo video. To cut a grip of by cutting away from your body you pretty much have to be standing on your head!
CGKansas1
Nov 7, 2018 at 9:33 pm
I guess it just matters on your point of view on this video – is it supposed to be educational or just entertainment? If the point of the video is to show how to change a grip and he does it unsafely and improperly then why is it here? If the purpose is for us to giggle at then good job!
Tim Armington
Jul 27, 2019 at 3:07 pm
There is nothing wrong with the way he cut off the grip. I cut off hundreds of grips per week and do it the same way he does.
Chuck Dietz
Nov 7, 2018 at 1:41 pm
What was the outside diameter of the adjustable sleeve? was it 0.580 or 0.600 inches? Or a custom size?
I have an adjustable TaylorMade Ghost putter (Actually an adjustable TM Fitting Tool putter, and the sleeve diameter is 0.680, for which I cannot find a replacement putter grip. Any sources for a replacement grip?
Techvan4Life
Nov 7, 2018 at 12:19 pm
“Perfectly vertical” without the aid of any type of level – that’s new, and once again you managed to make an easy process dangerous. It does not matter what you are working on or what you are doing, all materials must be secured properly before adjusting. The concept of basic shop safety escapes you. Please stop – these are getting worse every time.
Tommy
Nov 7, 2018 at 9:10 am
You need a plumb line drawn on the wall across from your work to at least help a little with the club face alignment. Looking at the from the side with your head cocked 90* is the worst method for squaring the grip that I’ve ever seen. This is especially important for a putter, as you know. Not a small thing or an advance detail. Also, SAVE THAT GRIP! That’s $15 on eBay!
robert horneman
Nov 7, 2018 at 8:29 am
Too bad you didn’t save the $25.00 grip.New grips are VERY easy to save.
Golf64
Nov 6, 2018 at 6:00 pm
Thanks for doing this vid.! I have had a few ppl. ask me this question of grip changes.
Golf Gear Box
Nov 6, 2018 at 3:56 pm
Thanks very helpful video. As a regripper I have not come across one of these yet so now I know what to expect! Though, when doing instructional videos please use safer razor blade technique, always slice away from you.
Rob
Nov 6, 2018 at 3:02 pm
That grip was 30* off square to the face. At least. 🙂
Russ
Nov 6, 2018 at 1:47 pm
I’ll give him credit for showing the mistakes; we are after all human.
I like the videos, is good to see how others do club work, WRX is always thinkin’.
skip
Nov 6, 2018 at 12:45 pm
what a hack.
ARTIT VIBULAKAOPUN
Nov 6, 2018 at 11:01 am
So I saw that you just slipped the grip on like normal. Did you cut a hole in the new grip to allow yourself access to the adjustable screw? Just curious.
Knudson
Nov 6, 2018 at 1:24 pm
No, I didn’t need to cut, or expand, the existing hole in the grip. I was still able to use the wrench to adjust the length with the grip as it is.