Connect with us

Equipment

SPOTTED: PXG 0311T “Gen2” prototype irons

Published

on

After spotting Charles Howell III testing a PXG XXF prototype driver on Monday at the 2018 CareerBuilder Challenge, we spotted CHIII and Zach Johnson testing PXG 0311T “Gen2” irons on Tuesday. We are told they are prototypes.

The original 0311T irons, which were released in 2015, were the Tour versions of the initial 0311 irons from PXG. The 0311T irons, while injected with the same thermoplastic elastomer (TPE) material that made PXG’s 0311 irons special, had smaller profiles, thinner toplines and soles, and less offset. They catered more to the Tour player than the original 0311 iron release, but still had the familiar PXG look with screws around the perimeter.

The PXG 0311T “Gen2” irons we spotted on Tuesday at the CareerBuilder have a slightly different look than the original 0311T irons. See if you can spot the differences below.

PXG 0311T “Gen2” 4-iron vs an original 0311T 4-iron

There’s a more accordion-like look on the back cavity of the 0311T Gen2 iron (left), and it seems the overall center of gravity (CG) may be lower in the club head on the Gen2 irons, as well. At least, it appears the club has a lower overall profile. It also appears the 7-screws near the sole wrap less around the toe portion in the Gen2 iron on the left, and there’s one less screw on the high toe portion of the Gen2 irons; possibly another notch in the lower-CG column.

What do you think of the PXG0311T “Gen2” irons that we spotted on Tuesday? See what GolfWRX members are saying about them in our forums.

Your Reaction?
  • 78
  • LEGIT24
  • WOW9
  • LOL5
  • IDHT2
  • FLOP7
  • OB2
  • SHANK60

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

16 Comments

16 Comments

  1. Robert

    Mar 24, 2018 at 10:17 pm

    They changed the body material to a harder cast steel similar to Vokey wedges. Also similar to the P790. The prior generation PXG was a 1025 Forged body. I’ve hit the P790 vs the 0311t. The PXG prior gen is softer feeling. The odd part is the P790 gives you the oh I caught it soft feel on perfect shots, but misses are harsh compared to the PXG. The PXG is always soft. I prefer the PXG prior gen to the P790. You’d think it’d be cheaper in price due to the casting of the body, but I think they are $50 more a club. The new PXG looks better than the P790 less offset etc, but I think overpriced for what it is. Glad I got the 1st gen 1025 carbon.

  2. Brian

    Feb 18, 2018 at 5:02 pm

    Excited to see the next generation PXG irons. Love their stuff!

  3. Scotr

    Feb 3, 2018 at 3:32 pm

    Nothing but negatives here from people who are angry simply because they can’t afford them. Yawn

  4. stan

    Jan 19, 2018 at 12:13 am

    Here is what they say on the PXG website!:
    “PXG Irons
    PXG irons look saxxy, launch high, go far, feel soft, are unbelievably forgiving, and have a sweet spot the size of Texas. They are made with the finest alloys and are manufactured using a sophisticated process that only we would use.”

    ——————
    Well that sells clubs to desperate unfulfilled gearheads and rich old hackers.
    BTW… in Freudian psychoanalytic symbolism the elastomer-filled heads are equivalent to seamon-filled heads… believe it … and as for ‘skrews’…. 😮

  5. Reality Kid

    Jan 18, 2018 at 9:51 pm

    Another piece of junk brought to you by a douchebag who knows nothing about golf. When people show up at our course with these clubs and shoot a 98, we call them Douchebag Golfers.

    • stan

      Jan 19, 2018 at 12:15 am

      All the OEMs are coming out with hollow seamon-elastomer filled iron heads at astronomic prices with a huge markup over cost so they can pay tour pros to p!mp the brands…. so obvious.

  6. stan

    Jan 18, 2018 at 6:27 pm

    So you got ‘skrews’ to dial in a fade or draw and compensate for your swing faults…. and… you got a hollow club filled with jello to muffle the feel of your off-center hits…. and fake-forged for status of your WITB weapons.
    What’s next … a ball-seeking computer chip built into the clubhead?!! 😮

  7. FAKE FORGED!!!

    Jan 17, 2018 at 2:18 pm

    WRX staff once again covering up for these hollow clubs filled with jello.
    The only part that is ‘forged’ is the club face and even then it’s a simple and cheap roll forged plate. The rest of the clubhead is cast steel and casting the word ‘forged’ on the cast hosel is false advertising.
    But that doesn’t matter because once the gearheads fall in love with PXG they can zinc die cast the club and the gearheads will still slobber over it.

    • DAVE

      Jan 17, 2018 at 2:57 pm

      You should have used ALL CAPS the whole time…

      “PXG SUCKS!!! AHHHH!!! THEY SHOULD WRITE “CAST” ON THE HOSEL AND ‘FORGED” ONLY ON THE FACE!! I’M SO MAD!!! MOM…THE MEATLOAF!!!”

      • Robert Parsons

        Jan 18, 2018 at 12:16 pm

        That’s backwards according to their website.

        The body is forged.

        The face is FORMED and welded to the body.

        So either way, I don’t consider it a forged iron. It’s two pieces. The welding process negates the feeling a forged iron would give.

        Cut a Miura forged iron in half and weld it together. Would you still consider it a forged iron?

        • stan

          Jan 18, 2018 at 6:21 pm

          This what they say on their website:
          “Exceptional Feel at Impact
          The body is forged from S25C soft carbon steel. Forged materials, having a tight grain structure, resonate differently than cast materials which adds to an outstanding impact experience.”

          What you are saying is that the weld bead interferes with the tight grain structure of the body and this affects the ‘feel’ of the impact.
          What I say is a hollow body club filled with jello elastomer also negates the ‘feel’ of the club because it dulls the impact feel and negates the feel of where you hit the ball on the face. It deceives you!
          The ‘feel’ of impact on the face resonates through the hosel to the shaft, and the metal back of the body is irrelevant to impact ‘feel’ because it’s mostly separated from the face.

    • It's Forged Homie

      Jan 17, 2018 at 3:20 pm

      Have you actually gone to their site and read about their irons? They show right on their site the blank forgings they use, then the incremental steps to end at their product.

      • Stupidity

        Jan 17, 2018 at 6:58 pm

        He won’t go to the site. It’s way too much fun to angry type nonsense about a product he pre-judged based on price and target market. I play PXG over my old Miura set because the Trackman numbers were better. Pretty simple.

        • Robert Parsons

          Jan 18, 2018 at 12:09 pm

          I read it on their site.

          Says the body is forged.

          The face is “FORMED” from HT1770 high-strength steel and plasma welded to the body.

          So the face is NOT FORGED. Hmmm…

          https://www.pxg.com/en-us/clubs/irons

          Read it for yourself. Bottom of the page, scroll to the left. Body, goo, face.

          Nobody hides the facts like we do. Period.

        • stan

          Jan 19, 2018 at 12:17 am

          Your forum moniker says it all… you need super-forgiveness clubs for your off-center hits… and you need a psychological boost playing seamon-elastomer filled irons …. so obvious

  8. Jerry

    Jan 17, 2018 at 11:50 am

    I think that are too rich for my blood now. lol. More power to those who get them. Looks more elegant with the weight pad and not cut off at the heel.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Matthieu Pavon WITB 2024 (May)

Published

on

Driver: Ping G430 Max (9 degrees)
Shaft: Fujikura Ventus TR Black 6 X

3-wood: Ping G430 LST (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X

Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black 10 X

Irons: Ping i230 (3-PW)
Shafts: Nippon Modus3 Tour 120 X

Wedges: Ping Si59 (52-12S, 58-8B)
Shafts: Nippon Modus3 Tour 120 X

Putter: Ping Cadence TR Tomcat C
Grip: SuperStroke Claw 1.0P

Grips: Golf Pride MCC Align

Ball: Titleist Pro V1

Check out more in-hand photos of Pavon’s gear here.

 

 

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Spotted: Tommy Fleetwood’s TaylorMade Spider Tour X Prototype putter

Published

on

Tommy Fleetwood has been attached to his Odyssey White Hot Pro #3 putter for years now. However, this week at the Wells Fargo Championship, we did spot him testing a new putter that is very different, yet somewhat similar, to his current gamer.

This new putter is a TaylorMade Spider Tour X head but with a brand new neck we haven’t seen on a Spider before. A flow neck is attached to the Spider head and gives the putter about a 1/2 shaft offset. This style neck will usually increase the toe hang of the putter and we can guess it gets the putter close to his White Hot Pro #3.

Another interesting design is that lack of TaylorMade’s True Path alignment on the top of the putter. Instead of the large white center stripe, Tommy’s Spider just has a very short white site line milled into it. As with his Odyssey, Tommy seems to be a fan of soft inserts and this Spider prototype looks to have the TPU Pure Roll insert with 45° grooves for immediate topspin and less hopping and skidding.

The sole is interesting as well in that the rear weights don’t look to be interchangeable and are recessed deep into the ports. This setup could be used to push the CG forward in the putter for a more blade-like feel during the stroke, like TaylorMade did with the Spider X Proto Scottie Scheffler tested out.

Tommy’s putter is finished off with an older Super Stroke Mid Slim 2.0 grip in blue and white. The Mid Slim was designed to fit in between the Ultra Slim 1.0 and the Slim 3.0 that was a popular grip on tour.

Your Reaction?
  • 1
  • LEGIT1
  • WOW1
  • LOL1
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Club Junkie WITB, league night week 4: Some old, some new

Published

on

We enter week 4 of Thursday night men’s league feeling a little more confident in the game. BK is hoping to go a little lower and reduce the mistakes out there with these clubs in the bag. Watch the video for the full breakdown of why these clubs are getting the starting nod this week!

Driver: Titleist TSR2 (10 degrees, neutral setting)
Shaft: Mitsubishi Diamana WB 63 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: UST Mamiya Lin-Q M40X TSPX Blue 7F5

7-wood: Ping G430 Max (-1 degree, flat Ssetting)
Shaft: Fujikura Ventus TR Blue 8 S

Iron: Mizuno Pro Fli-Hi 4
Shaft: Aerotech Steelfiber hls880 S

Irons: PXG 0317 Tour (5-PW)
Shaft: LA Golf A-Series 105 Low (4)

Wedge: Titleist Vokey SM10 (50-08F)
Shaft: UST Mamiya Dart V 105 F4 Wedge

Wedge: Ping S159 (56-10H)
Shaft: Ping Z-Z115

Wedge: Ping S159 (60-08B)
Shaft: Ping Z-Z115

Putter: PXG Battle Ready II Brandon
Shaft: BGT Stability Tour Spec One

Ball: Callaway Chrome Tour X

Your Reaction?
  • 2
  • LEGIT2
  • WOW2
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

WITB

Facebook

Trending