Connect with us

Equipment

Ping’s new Glide 2.0 “Stealth” wedges, and Vault 2.0 putters

Published

on

Today, in addition to the G400 Max driver and the G700 irons, Ping also launched Glide 2.0 Stealth wedges, and the Vault 2.0 putters that we first spotted at the 2018 Sony Open in Hawaii. Each of the products are currently available for pre-order. See below for tech info, photos and more about the offerings.

Glide 2.0 Stealth wedges

Unlike the original Glide 2.0 wedges, which were made from 431 stainless steel, the Glide 2.0 Stealth wedges are made from 8620 carbon steel for a softer feel. More obviously, they have a different, darker finish that reduces glare and “makes the wedges seem smaller,” according to Ping. The finish is applied using something called a Quench Polish Quench process for greater durability.

The wedges also have a milled, wheel-cut “half-groove” near the leading edge of the higher-lofted wedges (56, 58 and 60 degrees) to increase spin on shots hit low on the face.

Like the Glide 2.0 wedges, the Stealth versions also have progressive groove designs, which means the grooves in the lower-lofted wedges (46, 50 and 52 degrees) have a larger edge radius than the higher-lofted wedges. Therefore, the lower-lofted wedges will perform a bit more like irons, while the higher-lofted wedges will have additional spin for more control around the greens.

The Stealth wedges come in 17 loft-grind combinations, as listed below:

  • SS Grind (46-12, 50-12, 52-12, 54-12, 56-12, 58-10 and 60-10)
  • WS Grind (54-14, 56-14, 58-14 and 60-14)
  • TS Grind (58-06 and 60-06)
  • ES Grind (54-08, 56-08, 58-08 and 60-08)

They come stock with either Ping’s AWT 2.0 steel shaft ($150) or Ping’s CFS graphite shaft ($175). Additional shafts are also available at no upcharge.

Click here for discussion and more photos of the wedges

Vault 2.0 putters

Ping’s new Vault 2.0 putters have a greater focus than ever on fitting. Using a new custom-weighting system, the putters are available with either steel sole plates, tungsten sole plates that are 15-grams heavier than steel, or aluminum sole plates that are 15 grams lighter than steel. Putters between 34 and 36 inches use steel, putters 36 and longer use aluminum, and putters 34 inches and shorter use tungsten. This allows golfers to have a putter with the correct feel and balance no matter the length.

The 100-percent-milled putters also use Ping’s True Roll technology in their faces, evident by the pattern of cross-hatched grooves that are varied in depth across the face to increase speed on off-center hits. The goal with this face design is to get the speed the golfer needs on longer putts, even if the contact is on the heel or toe.

Five of the putter models (aside from the Ketsch) are made from 303 stainless steel and are available in three finishes: Stealth, Platinum and Copper. The Ketsch mallet is available in two finishes, Stealth or Slate, and combines a 6061 Aluminum body with a stainless steel sole plate. Grip options for the putters include the PP60 (a midsize design with foam under-listing), the PP61 (an “exaggerated pistol” with a rubber under-listing), the PP62 (over-sized with a rounded profile) or the CB60 (the standard counterbalanced grip).

Get the specs for each of the new Vault 2.0 putters below, which sell for $325 apiece.

Vault 2.0 Dale Anser

The new Dale Anser is “inspired by one of the original Anser putter molds created by Allan Dale Solheim and detailed by his father, Karsten Solheim,” according to Ping.

  • Weight: 350 grams
  • Toe Hang: Slight Arc
  • Standard length: 35 inches
  • Loft: 3 degrees
  • Lie Angle: Adjustable +/- 4 degrees

See more photos here.

Vault 2.0 Voss

  • Weight: 350 grams
  • Finish: Available in Stealth finish (Copper or Platinum available on special order)
  • Toe Hang: Slight Arc
  • Length: 35 inches
  • Loft: 3 degree
  • Lie Angle: Adjustable +/- 4 degrees

See more photos here.

Vault 2.0 B60

  • Weight: 355 grams
  • Finish: Available in Stealth or Copper finish (Platinum available special order)
  • Toe Hang: Slight Arc
  • Length: 35 inches
  • Loft: 3 degrees
  • Lie Angle: Adjustable +/- 4 degrees

See more photos here.

Vault 2.0 ZB

  • Weight: 350 grams
  • Finish: Available in Platinum (Copper or Stealth available special order)
  • Toe Hang: Slight Arc
  • Length: 35 inches
  • Loft: 3 degrees
  • Lie Angle: Adjustable +/- 4 degrees

See more photos here.

Vault 2.0 Piper (Mid-Mallet)

  • Weight: 360 grams
  • Finish: Available in Stealth finish (Copper or Platinum available special order)
  • Toe Hang: Slight Arc or Straight
  • Length: 35 inches
  • Loft: 3 degrees
  • Lie Angle: Adjustable +/- 2 degrees

See more photos here.

Vault 2.0 Ketsch (Mallet)

  • Weight: 365 grams
  • Finish: Available in Stealth finish (Slate finish available special order)
  • Toe Hang: Slight Arc or Straight
  • Length: 35 inches
  • Loft: 3 degrees
  • Lie Angle: Adjustable +/- 2 degrees

Click here for discussion and more photos of the putters.

Your Reaction?
  • 68
  • LEGIT4
  • WOW2
  • LOL1
  • IDHT0
  • FLOP0
  • OB0
  • SHANK2

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

4 Comments

4 Comments

  1. Jorgen

    Jan 17, 2018 at 12:54 pm

    Will the stealth wedges rust over time?

    • AllanG

      Jan 17, 2018 at 2:50 pm

      Even though they are carbon steel they have a Quench Polish Quench process for greater durability. No rust on Ping wedges and they always stay pretty in your clutch of WITB beauties. Can’t let rust come in contact with your regular irons to dirty up their chrome polish sheen …. 😮

      • Jorgen

        Jan 22, 2018 at 10:12 pm

        Thanks bro! I just saw a review of them on youtube and the reviewer said that they would start to rust so I just wanted some clarification on that!

  2. Walter

    Jan 15, 2018 at 4:23 pm

    OMG!!!!! These clubs and putters are fantastic!!!! I’m going to buy one of each because I have enough money so that price is not important to me.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Steve Stricker WITB 2024 (April)

Published

on

Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X

3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX

Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X

Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5

Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore

Putter: Odyssey White Hot No. 2

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet Grip Rite

Check out more in-hand photos of Steve Stricker’s clubs here.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT1
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Alex Fitzpatrick WITB 2024 (April)

Published

on

  • Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic. 

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X

Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX

Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)

Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X

Putter: Bettinardi SS16 Dass

Grips: Golf Pride MCC

Check out more in-hand photos of Alex Fitzpatrick’s clubs here.

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss

Published

on

In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
  • driveandputtmachine: “Still playing a MIni 300.  The head was only 208, so I ordered a heavier weight and play it at 3 wood length.  I am playing a Ventus Red 70.   I play 70 grams in my fairways.  I use it mainly to hit draws off the tee.  When I combine me, a driver, and trying to hit a draw it does not work out well most of the time.  So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck.  The 300 Mini is very good off the deck.”
  • JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”

Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”

Your Reaction?
  • 3
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK2

Continue Reading

WITB

Facebook

Trending