Connect with us

Equipment

Cleveland CBX wedges, for golfers who play cavity-back irons

Published

on

Next time you’re at a golf course, take a look in the bag of a fellow golfer. Chances are you’ll see a set of lightweight, cavity-back irons. These are called game-improvement irons in the industry, and according to Cleveland 84 percent of golfers use them. Then look at that same golfer’s wedges. Undoubtedly, you’ll find blade wedges that are heavy and unforgiving. Why do average golfers give up forgiveness on their wedges when they deem forgiveness necessary in their irons?

Solving this conundrum is the crux of Cleveland’s new CBX wedges, which are designed to mesh better with a set of cavity-back irons than other wedges on the market, or at least better than Cleveland wedges in the past.

dea97e532e0551fd1244e641f82a7650

To accomplish this, Cleveland’s CBX wedges have a cavity-back design that utilizes perimeter weighting. Seventy-six grams of mass was removed middle of the wedges and spread to their outer edges, according to Cleveland. For golfers, that leads to greater forgiveness on shots impacted off-center, thus reducing the effect of mishits.

cdfda89ef9ff06e66595a77457e482f1

Cleveland also touts “feel-balanced technology” with its CBX wedges, which pushes center of gravity (CG) toward the toe in order to balance in the club heads versus their predecessors. In order to do this, Cleveland has a wider sole and topline on the toe section of the club, as well as a redesigned hosel that removes weight from the heel. Overall, CG has shifted 3 grams more toeward — or more toward the center — than its previous wedge.

a86b203b3d48a55ef8ac4a1e6a1186e7

In recent years, wedge makers have emphasized the importance of sole grinds in relation to turf interaction and shotmaking alike. In the CBX wedges, there is front-to-back V-Grind, as well as a heel-to-toe V-Grind (the heel portion of the sole is thinner than toe portion of the sole). The “dual” V-Grind is said to help the club glide better through the turf and prevent digging, as well as provide more versatility. In other words, it allows golfers to adjust the face and lie angle more easily to play different shots.

Screen Shot 2017-07-27 at 4.40.50 PM

As the wedges flow from gap wedge to sand wedge to lob wedge, the shapes and weights also change (see in the graphic above, provided by Cleveland). You’ll notice the lower-lofted CBX wedges have a smaller shape (they also weigh a bit less), mimicking the look and feel of short irons. The higher-lofted wedges are bigger in size and weigh slightly more, which makes them feel more like a traditional wedge. Cleveland says this progressive design will better mesh with the cavity-back or game-improvement irons that most golfers use.

18943550b6576939cea5630b68fc27deAs you’d expect from a Cleveland wedge, the CBX wedges also have the company’s Rotex (RTX) groove technology. That means the faces have deep, U-shaped grooves with sharp radii, “micro-milled” grooves between each bigger groove, and laser-milling. Collectively, these features help “grab” the golf ball at impact and create additional spin.

Stock shafts in the CBX wedges are designed to be lighter than traditional after-market wedge shafts like you’d see on Tour. They include True Temper’s Dynamic Gold 115 (steel), as well as a Rotex Precision graphite wedge shaft that weighs just 90 grams.

Specs and Pricing

Screen Shot 2017-07-27 at 4.45.32 PM

Cleveland CBX wedges will hit stores on September 15, and they will sell for $129.99 apiece with steel shafts, and $139.99 each for graphite.

Discussion: See what GolfWRX Members are saying about Cleveland’s CBX wedges.

Your Reaction?
  • 154
  • LEGIT15
  • WOW2
  • LOL3
  • IDHT1
  • FLOP4
  • OB4
  • SHANK18

He played on the Hawaii Pacific University Men's Golf team and earned a Masters degree in Communications. He also played college golf at Rutgers University, where he graduated with a Bachelor of Arts in Journalism.

11 Comments

11 Comments

  1. OB

    Sep 8, 2017 at 3:56 pm

    The club designers are always attempting to design out the average golfer’s swing flaws by shifting mass all over the back of the clubhead.

    Look at the Ping Zing and Zing2 clubhead design and you will see the optimal mass distribution across a clubhead and the club sole.

  2. Bob Bissonette

    Aug 21, 2017 at 6:21 am

    I’ve been a proponent of this concept for years. It’s about time.

  3. BusterG

    Aug 1, 2017 at 2:31 pm

    Wow I love the look of these Clev wedges front and back. They are winners

  4. Doug A

    Aug 1, 2017 at 10:51 am

    Doesn’t Tour Edge already have a CBX line?

  5. Timbleking

    Aug 1, 2017 at 10:10 am

    Many years ago I was one of the first to demo the Ping iWedges in my country, and I really felt a difference from the very first bunker shot. Forgiving, confidence-makers, so easy to hit from any lie for any type of shot.
    Those ones look like them a lot.

  6. Philip

    Jul 31, 2017 at 10:05 pm

    No issue with it, but the most forgiving wedges I have ever played are my current Vokey’s – it is all in the grind/loft/bounce combo … and the golfer swinging the club that creates forgiveness – not just the club design in isolation. But I know a lot of golfers that could use some serious help with wedges so there definitely is a market for easier wedges if indeed having a cavity design helps with those tricky touchy ones around the green. Even if it is just the V-soles and the cavity is mostly marketing – every little bit helps

  7. tom

    Jul 31, 2017 at 7:08 pm

    RTX3 CB wedges are great. Best “full shot” wedge I have played.

  8. RG

    Jul 31, 2017 at 4:21 pm

    I play a Ping Eye 2 l wedge and two Cleveland CG16’s in 56 and 52 which are all cavity back. The great difference is in chipping and pitching. Hitting chips and pitches is sooo much easier and sooo much more precise with a cavity back wedge. Isn’t that what it’s really all about? I make my hay getting up and down and knocking it close on par 5’s. Really want to try these wedges.

  9. Paul

    Jul 31, 2017 at 9:44 am

    Cleveland making cavity back wedges isn’t new, I own 4 of them already! Cleveland 588 Rotex 2.0 CB.

    Now arguably they aren’t truly ‘cavity back’. The new design look like Cleveland much more aggressive with the weight distribution.

    I have to say my current wedges include a 62°, and I’d be lost without it.

    Make a 62° and a 64° for this set please Cleveland!

  10. TexasSnowman

    Jul 31, 2017 at 9:18 am

    Makes total sense to me; always wondered why premium wedges were not offered in a cavity back design; Especially when the Ping Eye2 wedges remained so popular even with lower handicappers.

  11. xjohnx

    Jul 31, 2017 at 8:41 am

    I don’t think this is a bad idea.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Kris Kim WITB 2024 (May)

Published

on

Driver: TaylorMade Qi10 (9 degrees @7)
Shaft: Mitsubishi Tensei 1K White 60 TX

3-wood: TaylorMade Qi10 Tour (15 degrees @13.5)
Shaft: Mitsubishi Diamana WB 73 TX

Irons: TaylorMade P770 (2, 4), TaylorMade P7MB (5-PW)
Shafts: Mitsubishi Tensei 1K White 80 TX (2), Nippon N.S. Pro Modus3 Tour 120 X

Wedges: TaylorMade MG4 (50-09SB, 56-12SB, 60-11TW)
Shafts: Nippon N.S. Pro Modus3 WV 125

Putter: TaylorMade Spider Tour

Grips: Golf Pride Tour Velvet Cord

Check out more in-hand photos of Kris Kim’s equipment here.

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Welcome to the family: TaylorMade launches PUDI and PDHY utility irons

Published

on

TaylorMade is continuing its UDI/DHY series with the successor to the Stealth UDI and DHY utility irons: PUDI and PDHY (which the company styles as P·UDI and P·DHY). TaylorMade is folding the designs in with its P Series of irons.

TaylorMade outlined the process of developing its new utilities this way. The company started with the data on utility iron usage. Not surprisingly, better players — i.e. those who generate more clubhead speed and strike the ball more precisely — were found to gravitate toward the UDI model. DHY usage, however, covered a wider swath than the company might have expected with six-to-18 handicappers found to be bagging the club.

TaylorMade also found that the majority of golfers playing UDI or DHY utilities were playing P Series irons at the top of their iron configurations.

Can you see where this is going?

Matt Bovee, Director of Product Creation, Iron and Wedge at TaylorMade: “As we look to the future, beyond the tech and the design language, we are excited about repositioning our utility irons into the P·Series family. P·UDI is an easy pair for players that currently play P·Series product and P·DHY is an extremely forgiving option for players of all skill levels. It is a natural fit to give these players the performance in this category that they are looking for.”

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

TaylorMade PUDI

TaylorMade PUDI technology cutaway (via TaylorMade)

Crafted with tour player input, TaylorMade sought to develop a confidence-inspiring utility iron that blends with the rest of the P Series irons. Also of note: Interestingly, the PUDI has a more compact head than the P790.

In comparison to past UDI products, the PUDI has a more traditional iron shape, slimmer toplines, and less offset with a little of the backbar visible at address.

TaylorMade PDHY

TaylorMade PDHY tech cutaway (via TaylorMade).

Larger in profile than the PUDI, the PDHY seeks to position center of gravity (CG) lower in the club for ease of launch. The toe height is larger and the profile is larger at address — roughly five millimeters longer than PUDI — the sole of the club is wider for improved forgiveness.

Club Junkie’s take

Golfers who feel like they are missing something at the top of the bag could find the PUDI or PDHY a great option. The look of the PUDI should fit the most discerning eye with a more compact look, less offset, and a thinner topline. If you want a little more confidence looking down the P-DHY will be slightly larger while still being a good-looking utility iron.

For being small packages both models pack a pretty good punch with fast ball speeds, even off-center. The feel is soft and you get a solid feel of the ball compressing off the face when you strike it well. Your ears are greeted with a nice heavy thud as the ball and club come together. The PDHY will launch a little higher for players who need it while the PUDI offers a more penetrating ball flight. Both utility irons could be the cure for an open spot in the top end of the bag.

PUDI, PDHY, or Rescue?

TaylorMade offers the following notes to assist golfers in filling out their bags:

  • PUDI has mid-CG right behind the center face to create a more penetrating mid-to-low ball flight
  • PDHY has a lower center of gravity to produce an easier-to-launch mid-to-high ball flight.
  • Both PUDI and PDHY are lower-flying than the company’s hybrid/Rescue clubs.
  • PUDI is more forgiving than P790.
  • PDHY is the most forgiving iron in the entire TaylorMade iron family

Pricing, specs, and availability

Price: $249.99

At retail: Now

Stock shafts: UST Mamiya’s Recoil DART (105 X, 90 S and 75 R – only in PDHY)

Stock grip: Golf Pride’s ZGrip (black/grey)

PUDI lofts: 2-17°, 3-20°, 4-22° in both left and right-handed

PDHY lofts: 2-18°, 3-20° and 4-22° in both left and right-handed

Your Reaction?
  • 15
  • LEGIT4
  • WOW3
  • LOL3
  • IDHT1
  • FLOP2
  • OB2
  • SHANK4

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (5/3/24): Scotty Cameron Champions Choice 2.5+ putter

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a Scotty Cameron Champions Choice 2.5+ putter

From the seller: (@wwcl): “Has been gamed as pics show. 33.5 includes original h/c and grip. $575 includes shipping and PP fees.”

To check out the full listing in our BST forum, head through the link: Scotty Cameron Champions Choice 2.5+ putter

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 1
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending