Equipment
Callaway Mack Daddy Forged Wedges: What you need to know
Callaway’s new Mack Daddy Forged wedges are quite different than the company’s current MD3 Milled wedges, and that’s by design. They’re not meant to replace the MD3 Milled or any other Callaway wedge model, but rather expand the company’s wedge offerings to meet the needs of different golfers.
As their name suggest, the biggest change to the Mack Daddy Forged wedges is that they’re forged from a soft 1025 carbon steel. Here’s what else you need to know about the new Mack Daddy Forged wedges, which will sell for $149.99 each when they hit stores on January 20.
What You Need To Know
Lofts Available: 50, 52, 54, 56, 58 and 60 degrees
Stock Shafts: True Temper Dynamic Gold S200 Tour Issue (Blue Label)
Stock Grip: Lamkin UTX
Finishes: Satin Chrome (silver) and Brushed Slate (black)
- The Mack Daddy Forged wedges have a unique shape that resonated instantly with Callaway Staffers Henrik Stenson and Thomas Pieters, who both used the new wedges at the 2016 Ryder Cup. New Callaway signing Daniel Berger is also using the new wedges.
- Compared to other Callaway wedges, the Mack Daddy Forged have less offset, squarer toes and straighter leading edges. Callaway wedge designer Roger Cleveland says that a straighter leading edge makes a wedge easier to align.
- The Mack Daddy Forged have what Callaway calls an •R• Grind. It’s similar to the C Grind used on Callaway’s MD3 Milled wedges, Cleveland says, but it is more relieved in the heel and toe areas to offer more versatility around the greens. Cleveland calls it a “mid-bounce” grind, suitable for everything from open-faced lobs to square-faced bump and runs.
- Expect more spin from the Mack Daddy Forged’s new 16-groove design, which adds a groove near the bottom of the wedge face to promote increased stopping power, especially on shots of 10-20 yards.
- Like Callaway’s MD3 Milled wedges, the Mack Daddy Forged use Callaway’s Progressive CG Position. As loft goes higher, so does each wedge’s center of gravity to create maximum spin.
- The wedges are offered in two finishes: Satin Chrome and Brushed Slate. The Satin Chrome wedges have a layer of copper beneath their Satin Chrome plating, which creates a unique feel and improves durability. In the high-wear areas of a wedge, such as the face and sole, the copper layer will become visible with use. Brushed Slate wedges will wear to a raw finish.
Related: See what GolfWRXers are saying about Callaway’s Mack Daddy Forged wedges in our forum.
- LIKE247
- LEGIT18
- WOW13
- LOL4
- IDHT1
- FLOP3
- OB5
- SHANK40
Whats in the Bag
Steve Stricker WITB 2024 (April)
- Steve Stricker WITB accurate as of the Zurich Classic. More photos from the event here.
Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X
3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX
Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X
Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5
Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore
Putter: Odyssey White Hot No. 2
Ball: Titleist Pro V1x
Grips: Golf Pride Tour Velvet Grip Rite
Check out more in-hand photos of Steve Stricker’s clubs here.
- LIKE11
- LEGIT2
- WOW0
- LOL0
- IDHT1
- FLOP0
- OB0
- SHANK0
Whats in the Bag
Alex Fitzpatrick WITB 2024 (April)
- Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X
Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX
Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)
Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X
Putter: Bettinardi SS16 Dass
Grips: Golf Pride MCC
Check out more in-hand photos of Alex Fitzpatrick’s clubs here.
- LIKE4
- LEGIT0
- WOW0
- LOL0
- IDHT1
- FLOP0
- OB0
- SHANK0
Equipment
What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss
In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
- driveandputtmachine: “Still playing a MIni 300. The head was only 208, so I ordered a heavier weight and play it at 3 wood length. I am playing a Ventus Red 70. I play 70 grams in my fairways. I use it mainly to hit draws off the tee. When I combine me, a driver, and trying to hit a draw it does not work out well most of the time. So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck. The 300 Mini is very good off the deck.”
- JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”
Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”
- LIKE3
- LEGIT1
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK4
-
19th Hole2 weeks ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole5 days ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole3 weeks ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole4 days ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole2 weeks ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole2 weeks ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole1 week ago
Brandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
edge of lean
Jan 20, 2017 at 9:55 pm
Any offerings for us lefties? Y’know, being peddled by Mickelson and all.
Troy Sheaffer
Jan 11, 2017 at 1:28 pm
Used the MD3 Wedges for a bit over a year and they have been great. Looking forward to seeing and testing these wedges to determine if a change would be beneficial.
Rich
Jan 11, 2017 at 2:09 am
Can’t wait to see/try these, they look great!
MT
Jan 10, 2017 at 5:32 pm
why Rory Mcilroy doesn’t play them and uses Titlest instead?
MT
Jan 10, 2017 at 5:29 pm
what you need to know is that their highest ranked player Rory McIlroy is playing Titlest wedges instead of that Callaway wedges and that are the only clubs in his bag that are not Callaway.
booya cornflakes
Jan 13, 2017 at 12:40 pm
Correct. But how does Rory’s preference in wedges relate to whether these will fit my game?
FWIW, I currently play MD3’s, and they kicked my SM6’s out of the bag. I just like the feel better, they’re both good wedges. Stop being such a fanboy.
Scott
Jan 25, 2017 at 4:30 am
What Rory plays with doesn’t mean squat to me or my game.
jgpl001
Jan 10, 2017 at 4:37 pm
These look good, very good
I am not a TM fan, but have been playing the TM EF wedges for the past 6 months and they are excellent, perfect head shape and loads of bit, just wish they were a touch softer
Tempted….
S Hitty
Jan 10, 2017 at 2:40 pm
He copied the TM EF wedges. Sharper leading edge, squarer toe, 1025 soft carbon. Because the MD3 was so crappy
Mark
Jan 10, 2017 at 1:49 pm
Well that is my birthday present sorted. 54 and 58 in slate finish. Marvellous.
Joshuaplaysgolf
Jan 10, 2017 at 12:09 pm
Could something pull these Vokeys out of my cold dead hands?? And my wife and I just did our 2017 golf budget last night….I’m highly intrigued to demo these.
Woop
Jan 10, 2017 at 4:30 pm
Should’ve been using the TM EF wedges.
Charlie
Jan 10, 2017 at 9:34 am
Dammit Callaway – We need more lofts!!! Was hoping to grab a 46 or 48 from this new lineup and possibly a 64!
Cornwall1888
Jan 10, 2017 at 9:12 am
I’d like to use forged wedges but I like to get a few seasons out of a wedge I think forged wedges would wear to fast
The dude
Jan 10, 2017 at 3:21 pm
Jeez….how many rounds you play?…live in FL?
Woop
Jan 10, 2017 at 4:31 pm
Get the TM EF wedges. Those grooves will last you 18 months easily
Mike
Jan 11, 2017 at 12:42 am
yep my TM EF 60 is still going two years and no difference in performance.. playing all year round
C
Jan 10, 2017 at 7:43 am
I like that lowest groove. Sure it is great for chips around the green. But it’s also useful to try and back up my skulled shots that bound across the green.